mondo-devel Mailing List for Mondo Rescue

I am finally getting back to this problem after travelling and holidays.

Our story so far...when trying to do a mondo-restore on a machine 
with 2 scsi controllers, mondo is swapping the hardware 
configuration: the mirrored pair that was sda becomes sdb and the 
RAID 5 array that was sdb becomes sda, leading to the OS being 
installed on the wrong volume.

Conor made some suggestions about why this was happening and offered 
possible workarounds relating to the module loading, which 
unfortunately did not work. Then...

At 11:21 +0000 11/4/04, Conor Daly wrote:


>If all of this fails, a possible method is to do a two-stage clone process.
>It goes like this:
>
>1.  Use mondoarchive to make a backup of everything except /dev/sdb (#0)
>2.  Use mondoarchive to make a backup of /dev/sdb (#1)
>3.  In the target machine, disconnect the extra scsi controller
>4.  Nuke from backup #0
>5.  Reconnect the extra scsi and boot as normal
>6.  On the live machine, partition and make filesystems on /dev/sdb
>7.  Insert backup #1, run 'mondorestore' and choose all files

Gave this a try. I skipped the steps related to the sdb backup since 
I am cloning servers and sdb contains data that will be different on 
all the machines.

After disconnecting the extra controller, I did a mondo-restore.
mondo reported that the mount list did not match the installed 
hardware (sdb was missing so that was to be expected).

I removed the /dev/sdb line from the mount list and started the 
restore which seemed to run ok. Until:

I got to the step about editing the mount list and grub.conf file. An 
editor window was brought up saying it was editing 
/mnt/RESTORE/etc/fstab but the file was empty. Shouldn't this have 
the contents of the original file?

I hand entered the mount data. I made no changes to the grub.conf file.

The mondo-restore.log is attached

When I exited mondo, the machine started to boot off the hard drive 
but then got to:

   Freeing unused kernel memory: 228k freed
   Kernel panic: no init found. Try passing init= option to the kernel.

The rest of the boot messages up to this point looked normal as did 
the grub.conf stanza that was used for the boot.

Any ideas what may be going on here?

TIA
-David-
-- 
David R. Steiner                               dav...@da...
UNIX System Manager                            Phone:  603.646.3127
Dartmouth College                              Fax:     603.646.1041

Alas, the log is gone, and I'm sure it would have made a terrific
bedtime story. Too bad.

This, however, is on my only machine at the moment (my laptop - I'm on
the road), and I've converted it to Ext2/3 for other reasons (not the
least being an advanced kernel - Reiser FS handling has, in the past,
sometimes been less than exemplary on a pristine kernel source).

When I get back to my workshop at home, I'll run experiments with
non-critical systems there - hopefully we'll be able to come up with
guidelines all can use.. but please don't expect it soon, as I may not
be able to see hearth and home (and dear wife) until June.

I'm still using Mondo, by the way - I've found it very reliable from the
direct backup and restore aspect, and I love it's small footprint.

Cheers,

Dave

I would suggest replication before backups as you have discovered. I
love mondo and what it does but am safe ahead of time.

If you declare a Kernel for mindi it is out of mondos hands. If your
version of Reiser FS is odd then there are problems. ( close to 40
versions )

Please submit your log to the list. Logs help and they are great ways
of putting us to sleep every night infront of the monitor.


On Tue, 30 Nov 2004 00:17:21 +0700, David A. Patterson
<sd...@ya...> wrote:
> I've had problems restoring to an altered disk geometry using reiserfs
> and a 2.6.9 kernel.  A LOT of stuff got corrupted, and I had to start
> over from scratch.
> 
> Fortunately, I had the important data secured in advance by other means,
> but the whole shebang (progs, settings, passwords, etc.) had to be
> rebuilt.
> 
> I really feel that the fault was actually in the kernel's handling of
> reiserfs in the new partition, but I think perhaps the documentation
> should have a little more info on journalling fs relocation - I'd be
> more than willing to write the docs for peer review if I knew how to do
> the task itself...
> 
> -------------------------------------------------------
> 
> 
> SF email is sponsored by - The IT Product Guide
> Read honest & candid reviews on hundreds of IT Products from real users.
> Discover which products truly live up to the hype. Start reading now.
> http://productguide.itmanagersjournal.com/
> _______________________________________________
> Mondo-devel mailing list
> Mon...@li...
> https://lists.sourceforge.net/lists/listinfo/mondo-devel
> 


-- 
Andrew Latham

http://www.lathama.com
la...@gm...
la...@ya...
la...@la...
If any of the above are not working we have 
bigger problems than my email.

I've had problems restoring to an altered disk geometry using reiserfs
and a 2.6.9 kernel.  A LOT of stuff got corrupted, and I had to start
over from scratch.

Fortunately, I had the important data secured in advance by other means,
but the whole shebang (progs, settings, passwords, etc.) had to be
rebuilt.

I really feel that the fault was actually in the kernel's handling of
reiserfs in the new partition, but I think perhaps the documentation
should have a little more info on journalling fs relocation - I'd be
more than willing to write the docs for peer review if I knew how to do
the task itself...

Happy to hear the good news and the not so good news.
Just the same, I'm happy that the project can cont. on now... 

Cheers,
Shai


On Mon, 29 Nov 2004 09:35:14 -0600, Ray Sanders <ray...@gm...> wrote:
> Hello everyone!
> 
> For those of you in the U.S I hope you had a pleasant holiday weekend.
> 
> Just writing to let you all know FastServers has agreed in principle
> to cease any and all actions against me.  Currently my attorney and I
> are waiting for something in writing.
> 
> FastServers will not, however reimburse me for my legal fees, which
> amount to nearly $2,000.00 at this time. :-(
> 
> I'm in the process of moving over the next two weeks, however, I
> should have a final update in the next few days. At this point I
> cannot forsee any "deal breakers" coming up.
> 
> Once again, thank you all for your help and vigilance.
> 
> On Sun, 28 Nov 2004 14:39:33 -0800, Hugo Rabson
> <hug...@mo...> wrote:
> > Hi Ray,
> >
> > Would you please let me know what's going on?
> >
> > I'm sure you don't want the Mondo project to be on hold forever.
> >
> > -Hugo
> >
> >
> 
> --
> "Live to win, Dare to Fail" - James Hetfield
> Ray Sanders - Project Lead - PXE-Mondo Project
> 
> -------------------------------------------------------
> SF email is sponsored by - The IT Product Guide
> Read honest & candid reviews on hundreds of IT Products from real users.
> Discover which products truly live up to the hype. Start reading now.
> http://productguide.itmanagersjournal.com/
> _______________________________________________
> Mondo-devel mailing list
> Mon...@li...
> https://lists.sourceforge.net/lists/listinfo/mondo-devel
>

On Mon, 29 Nov 2004 11:32:57 -0500, Andrew Latham <la...@gm...> wrote:
> So maybe that submission to the local newspaper just before
> the stop request got through - :)

Pardon? 

> 
> OK  back to work..........
> 
> Q and A time
> 
> Does Mondo/Mindi rely on Fastservers for hosting or is it a paid
> account? If we rely on them lets look into other options.

As far as I know, nothing Hugo relies on is hosted at FS. I can easily
set something up on Sourceforge for a permanent home for the PXE-Mondo
work that is done so far.
> 
> I have mirrored the PXE stuff at mirrors.warsawmail.com. This is not
> Rays work but the previous work. (pipe in here you know who.....)
> 

If I can chime in to say we need to look at merging the previous work
with mine, and see if we can get PXE-Mondo done. :-)   I can honestly
say that my work is quite, um. "unelegant" at this point.  :-)

> Does anyone need any PXE hardware to test with? (I have a nice supply
> of NC3121 cards)

All I needed to test the work I had done was a linux box with DHCP
Server, NFS, and the mondo packages, and a workstation that supports
PXE on the nic.


-- 
"Live to win, Dare to Fail" - James Hetfield
Ray Sanders - Project Lead - PXE-Mondo Project

So maybe that submission to the local newspaper just before 
the stop request got through - :)

OK  back to work..........

Q and A time 

Does Mondo/Mindi rely on Fastservers for hosting or is it a paid
account? If we rely on them lets look into other options.

I have mirrored the PXE stuff at mirrors.warsawmail.com. This is not
Rays work but the previous work. (pipe in here you know who.....)

Does anyone need any PXE hardware to test with? (I have a nice supply
of NC3121 cards)

Anyone else going to Linux World 2005 in Boston? I have two very nice
hotel rooms and a Van driving from Indiana to Boston. I have two
friends coming and would be happy to further split costs.

I have not had any problems with Mondo/Mindi in quite a while. Is
there a section of the project that is harder to work with than
others? (I stoped using tapes so I don't know what is going on over
there.).

Andrew "Need More List Posts to Read" Latham



On Mon, 29 Nov 2004 16:48:43 +0100, Mike <mi...@mi...> wrote:
> On Monday 29 November 2004 16:35, Ray Sanders wrote:
> > Hello everyone!
> >
> >
> > For those of you in the U.S I hope you had a pleasant holiday
> > weekend.
> 
> You don't have to be in the USA to enjoy the holiday.. ;-) I spent mine
> up in Norway with my grandkids. Had turkey and all the trimmings. And
> about 10 inches or so of new snow..
> 
> >
> > Just writing to let you all know FastServers has agreed in principle
> > to cease any and all actions against me.  Currently my attorney and I
> > are waiting for something in writing.
> 
> That's good news.. perhaps now this project can get back up and running.
> I miss it.  I haven't crashed a computer playing in quite a while.. ;-)
> 
> 
> > FastServers will not, however reimburse me for my legal fees, which
> > amount to nearly $2,000.00 at this time. :-(
> 
> That sucks..
> 
> > I'm in the process of moving over the next two weeks, however, I
> > should have a final update in the next few days. At this point I
> > cannot forsee any "deal breakers" coming up.
> 
> Cool.. Hopefully Hugo will put things back in motion. I know it will
> take a while, but at least the wheels will be turning again.
> 
> > Once again, thank you all for your help and vigilance.
> 
> Hey, you are one of the guys.. And an important one too. One that we
> stuck by.  I was just about to write another nasty note to Travis, when
> your message arrived. I'll keep quiet unless provoked.
> 
> Mike
> 
> --
> Powered by SuSE 9.2 Kernel 2.6.8 KDE 3.3.0 Kmail 1.7.1
> For Mondo/Mindi backup support go to
> http://www.mikenjane.net/~mike
>   4:43pm  up 1 day  0:10,  4 users,  load average: 2.05, 2.22, 2.51
> 
> 
> 
> 
> -------------------------------------------------------
> SF email is sponsored by - The IT Product Guide
> Read honest & candid reviews on hundreds of IT Products from real users.
> Discover which products truly live up to the hype. Start reading now.
> http://productguide.itmanagersjournal.com/
> _______________________________________________
> Mondo-devel mailing list
> Mon...@li...
> https://lists.sourceforge.net/lists/listinfo/mondo-devel
> 


-- 
Andrew Latham

http://www.lathama.com
la...@gm...
la...@ya...
la...@la...
If any of the above are not working we have 
bigger problems than my email.

On Monday 29 November 2004 16:35, Ray Sanders wrote:
> Hello everyone!
>
>
> For those of you in the U.S I hope you had a pleasant holiday
> weekend.

You don't have to be in the USA to enjoy the holiday.. ;-) I spent mine 
up in Norway with my grandkids. Had turkey and all the trimmings. And 
about 10 inches or so of new snow.. 

>
> Just writing to let you all know FastServers has agreed in principle
> to cease any and all actions against me.  Currently my attorney and I
> are waiting for something in writing.

That's good news.. perhaps now this project can get back up and running. 
I miss it.  I haven't crashed a computer playing in quite a while.. ;-)


> FastServers will not, however reimburse me for my legal fees, which
> amount to nearly $2,000.00 at this time. :-(

That sucks..

> I'm in the process of moving over the next two weeks, however, I
> should have a final update in the next few days. At this point I
> cannot forsee any "deal breakers" coming up.

Cool.. Hopefully Hugo will put things back in motion. I know it will 
take a while, but at least the wheels will be turning again.

> Once again, thank you all for your help and vigilance.

Hey, you are one of the guys.. And an important one too. One that we 
stuck by.  I was just about to write another nasty note to Travis, when 
your message arrived. I'll keep quiet unless provoked.

Mike

-- 
Powered by SuSE 9.2 Kernel 2.6.8 KDE 3.3.0 Kmail 1.7.1
For Mondo/Mindi backup support go to
http://www.mikenjane.net/~mike
  4:43pm  up 1 day  0:10,  4 users,  load average: 2.05, 2.22, 2.51

Hello everyone!


For those of you in the U.S I hope you had a pleasant holiday weekend. 

Just writing to let you all know FastServers has agreed in principle
to cease any and all actions against me.  Currently my attorney and I
are waiting for something in writing.

FastServers will not, however reimburse me for my legal fees, which
amount to nearly $2,000.00 at this time. :-(

I'm in the process of moving over the next two weeks, however, I
should have a final update in the next few days. At this point I
cannot forsee any "deal breakers" coming up.

Once again, thank you all for your help and vigilance. 


On Sun, 28 Nov 2004 14:39:33 -0800, Hugo Rabson
<hug...@mo...> wrote:
> Hi Ray,
> 
> Would you please let me know what's going on?
> 
> I'm sure you don't want the Mondo project to be on hold forever.
> 
> -Hugo
> 
> 


-- 
"Live to win, Dare to Fail" - James Hetfield
Ray Sanders - Project Lead - PXE-Mondo Project

OK , Thanks
I will send the log file today



Bruno Negrão wrote:

> Carlos Herrera,
>
> Gostaríamos que você colocasse na lista o arquivo de log 
> /var/log/mondoarchive que é gravado após você fazer uma restauração do 
> backup, pois o Andrew pode descobrir qual é o problema com o seu LILO 
> através do arquivo de log.
>
> Até mais,
> -------------------------------------------------
> Bruno Negrao - Network Manager
> Engepel Teleinformática. 55-31-34812311
>
>
>
> -------------------------------------------------------
> SF email is sponsored by - The IT Product Guide
> Read honest & candid reviews on hundreds of IT Products from real users.
> Discover which products truly live up to the hype. Start reading now. 
> http://productguide.itmanagersjournal.com/
> _______________________________________________
> Mondo-devel mailing list
> Mon...@li...
> https://lists.sourceforge.net/lists/listinfo/mondo-devel


-- 

Carlos Herrera
Jefe de Sistemas
Sonesta Posadas del Inca
Pancho Fierro 194 San Isidro - Lima

Sonesta Posadas del Inca - Peru
Phone:  (511) 221-2121
Fax:  (511) 221-2114
Visit us at www.sonesta.com

--------------------------------------------------------------------------------------------------------------------------------------------------------------
Discover the world.  One Sonesta at a time.
There's nothing quite like a Sonesta.  Not even another Sonesta.  Each upscale hotel reflects the culture and history of its unique location.  The perfect place to exhale.
Boston · Miami · New Orleans · Bermuda · Brazil · Egypt · Tuscany . Peru  (Lima, Cusco, Sacred Valley, Lake Titicaca Puno, Arequipa) 
www.sonesta.com
------------------------------------------------------------------------------------------------------------------------------------------------------------------

Carlos Herrera,

Gostaríamos que você colocasse na lista o arquivo de log 
/var/log/mondoarchive que é gravado após você fazer uma restauração do 
backup, pois o Andrew pode descobrir qual é o problema com o seu LILO 
através do arquivo de log.

Até mais,
-------------------------------------------------
Bruno Negrao - Network Manager
Engepel Teleinformática. 55-31-34812311

I have done such a backup and restore. I am curious about the
controlers and  such. I would also like to look at the log. This is
one of the selling points of Mondo to me so I find it important. If it
is restorting and LILO is just lost that is an easy fix as that
happens to me all the time.


On Mon, 29 Nov 2004 10:37:06 -0200, Bruno Negr=E3o
<vpo...@en...> wrote:
> > Mark.... please translate .... even roughly if you will.....log file
> > would be nice
> Hi Andrew,
>=20
> Carlos's problem is he made a backup of a system using 3 SCSI hard disks
> and now he wants to restore this backup in a machine with 2 IDE hard disk=
s.
>=20
> I think the whole problem is the change form SCSI HD to IDE HD.
>=20
> I explained him in this e-mail in portuguese what I did to successfully
> restore a backup of this type.
>=20
> But I admit in my test the both machines have only 1 HD each. I don't kno=
w
> what happens when you are diminishing the number of hard disks in the
> restore process - can mondorescue deal with it?
>=20
> bruno.
>=20
>=20
>=20
>=20
> On Fri, 26 Nov 2004 18:38:42 -0200, Bruno Negr=E3o
> <vpo...@en...> wrote:
> > Oi Carlos,
> > Vou responder a voc=EA em Portugu=EAs.
> >
> > > o no se puede restablecer el backup en otra maquina con diferente
> > > arquitectura de discos ?
> > Pode sim. Eu acabei de fazer este teste com sucesso nesta semana. Eu
> > baixei
> > o backup do meu RedHat 8.0 com HD SCSI numa outra m=E1quina com HD IDE.
> >
> > Voc=EA deve prestar aten=E7=E3o aos seguintes aspectos:
> > 1 - No come=E7o da restaura=E7=E3o do backup, o mondorescue pede para v=
oc=EA
> > editar
> > o filesystem table. Neste momento, voc=EA deve editar cada filesystem
> > trocando "/dev/sdXX" para "/dev/hdXX". Por exemplo, se no seu computado=
r
> > SCSI o filesystem / est=E1 no dispositivo /dev/sda2, voc=EA dever=E1 mu=
dar o
> > dispositivo para /dev/hda2. Voc=EA fez isto?
> >
> > 2 - Mudar o par=E2metro passado ao kernel na hora do boot. Ap=F3s a
> > restaura=E7=E3o
> > do backup voc=EA provavelmente dever=E1 mudar a string "hda=3Dide-scsi"=
 para
> > "hdc=3Dide-scsi". A linha inteira =E9 assim:
> >
> >     kernel /vmlinuz-2.4.20-8 ro root=3DLABEL=3D/ hdc=3Dide-scsi
> >
> > Eu n=E3o sei como voc=EA atualiza isso usando o LILO pois meu boot load=
er =E9 o
> > GRUB. No caso do GRUB, esta linha fica no arquivo /boot/grub/grub.conf.
> >
> > OBS: Dependendo de onde voc=EA conectar seu CD-ROM, o nome do dispositi=
vo
> > muda:
> > hda =3D IDE controler 0, Master;
> > hdb =3D IDE controler 0, Slave;
> > hdc =3D IDE controler 1, Master
> > hdd =3D IDE controler 1, Slave
> >
> > Tomando estes cuidados, funciona perfeitamente.
> > Espero ter ajudado,
> > -------------------------------------------------
> > Bruno Negrao - Network Manager
> > Engepel Teleinform=E1tica. 55-31-34812311
> >
> >
> >
> >
> > -------------------------------------------------------
> > SF email is sponsored by - The IT Product Guide
> > Read honest & candid reviews on hundreds of IT Products from real users=
.
> > Discover which products truly live up to the hype. Start reading now.
> > http://productguide.itmanagersjournal.com/
> > _______________________________________________
> > Mondo-devel mailing list
> > Mon...@li...
> > https://lists.sourceforge.net/lists/listinfo/mondo-devel
> >
>=20
> --
> Andrew Latham
>=20
> http://www.lathama.com
> la...@gm...
> la...@ya...
> la...@la...
> If any of the above are not working we have
> bigger problems than my email.
>=20
> -------------------------------------------------------
> SF email is sponsored by - The IT Product Guide
> Read honest & candid reviews on hundreds of IT Products from real users.
> Discover which products truly live up to the hype. Start reading now.
> http://productguide.itmanagersjournal.com/
> _______________________________________________
> Mondo-devel mailing list
> Mon...@li...
> https://lists.sourceforge.net/lists/listinfo/mondo-devel
>=20
> -------------------------------------------------------
> SF email is sponsored by - The IT Product Guide
> Read honest & candid reviews on hundreds of IT Products from real users.
> Discover which products truly live up to the hype. Start reading now.
> http://productguide.itmanagersjournal.com/
> _______________________________________________
> Mondo-devel mailing list
> Mon...@li...
> https://lists.sourceforge.net/lists/listinfo/mondo-devel
>=20


--=20
Andrew Latham

http://www.lathama.com
la...@gm...
la...@ya...
la...@la...
If any of the above are not working we have=20
bigger problems than my email.

> Mark.... please translate .... even roughly if you will.....log file
> would be nice
Hi Andrew,

Carlos's problem is he made a backup of a system using 3 SCSI hard disks 
and now he wants to restore this backup in a machine with 2 IDE hard disks.

I think the whole problem is the change form SCSI HD to IDE HD.

I explained him in this e-mail in portuguese what I did to successfully 
restore a backup of this type.

But I admit in my test the both machines have only 1 HD each. I don't know 
what happens when you are diminishing the number of hard disks in the 
restore process - can mondorescue deal with it?

bruno.


On Fri, 26 Nov 2004 18:38:42 -0200, Bruno Negrão
<vpo...@en...> wrote:
> Oi Carlos,
> Vou responder a você em Português.
>
> > o no se puede restablecer el backup en otra maquina con diferente
> > arquitectura de discos ?
> Pode sim. Eu acabei de fazer este teste com sucesso nesta semana. Eu 
> baixei
> o backup do meu RedHat 8.0 com HD SCSI numa outra máquina com HD IDE.
>
> Você deve prestar atenção aos seguintes aspectos:
> 1 - No começo da restauração do backup, o mondorescue pede para você 
> editar
> o filesystem table. Neste momento, você deve editar cada filesystem
> trocando "/dev/sdXX" para "/dev/hdXX". Por exemplo, se no seu computador
> SCSI o filesystem / está no dispositivo /dev/sda2, você deverá mudar o
> dispositivo para /dev/hda2. Você fez isto?
>
> 2 - Mudar o parâmetro passado ao kernel na hora do boot. Após a 
> restauração
> do backup você provavelmente deverá mudar a string "hda=ide-scsi" para
> "hdc=ide-scsi". A linha inteira é assim:
>
>     kernel /vmlinuz-2.4.20-8 ro root=LABEL=/ hdc=ide-scsi
>
> Eu não sei como você atualiza isso usando o LILO pois meu boot loader é o
> GRUB. No caso do GRUB, esta linha fica no arquivo /boot/grub/grub.conf.
>
> OBS: Dependendo de onde você conectar seu CD-ROM, o nome do dispositivo
> muda:
> hda = IDE controler 0, Master;
> hdb = IDE controler 0, Slave;
> hdc = IDE controler 1, Master
> hdd = IDE controler 1, Slave
>
> Tomando estes cuidados, funciona perfeitamente.
> Espero ter ajudado,
> -------------------------------------------------
> Bruno Negrao - Network Manager
> Engepel Teleinformática. 55-31-34812311
>
>
>
>
> -------------------------------------------------------
> SF email is sponsored by - The IT Product Guide
> Read honest & candid reviews on hundreds of IT Products from real users.
> Discover which products truly live up to the hype. Start reading now.
> http://productguide.itmanagersjournal.com/
> _______________________________________________
> Mondo-devel mailing list
> Mon...@li...
> https://lists.sourceforge.net/lists/listinfo/mondo-devel
>


-- 
Andrew Latham

http://www.lathama.com
la...@gm...
la...@ya...
la...@la...
If any of the above are not working we have
bigger problems than my email.


-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://productguide.itmanagersjournal.com/
_______________________________________________
Mondo-devel mailing list
Mon...@li...
https://lists.sourceforge.net/lists/listinfo/mondo-devel

Mark.... please translate .... even roughly if you will.....log file
would be nice


On Fri, 26 Nov 2004 18:38:42 -0200, Bruno Negr=E3o
<vpo...@en...> wrote:
> Oi Carlos,
> Vou responder a voc=EA em Portugu=EAs.
>=20
> > o no se puede restablecer el backup en otra maquina con diferente
> > arquitectura de discos ?
> Pode sim. Eu acabei de fazer este teste com sucesso nesta semana. Eu baix=
ei
> o backup do meu RedHat 8.0 com HD SCSI numa outra m=E1quina com HD IDE.
>=20
> Voc=EA deve prestar aten=E7=E3o aos seguintes aspectos:
> 1 - No come=E7o da restaura=E7=E3o do backup, o mondorescue pede para voc=
=EA editar
> o filesystem table. Neste momento, voc=EA deve editar cada filesystem
> trocando "/dev/sdXX" para "/dev/hdXX". Por exemplo, se no seu computador
> SCSI o filesystem / est=E1 no dispositivo /dev/sda2, voc=EA dever=E1 muda=
r o
> dispositivo para /dev/hda2. Voc=EA fez isto?
>=20
> 2 - Mudar o par=E2metro passado ao kernel na hora do boot. Ap=F3s a resta=
ura=E7=E3o
> do backup voc=EA provavelmente dever=E1 mudar a string "hda=3Dide-scsi" p=
ara
> "hdc=3Dide-scsi". A linha inteira =E9 assim:
>=20
>     kernel /vmlinuz-2.4.20-8 ro root=3DLABEL=3D/ hdc=3Dide-scsi
>=20
> Eu n=E3o sei como voc=EA atualiza isso usando o LILO pois meu boot loader=
 =E9 o
> GRUB. No caso do GRUB, esta linha fica no arquivo /boot/grub/grub.conf.
>=20
> OBS: Dependendo de onde voc=EA conectar seu CD-ROM, o nome do dispositivo
> muda:
> hda =3D IDE controler 0, Master;
> hdb =3D IDE controler 0, Slave;
> hdc =3D IDE controler 1, Master
> hdd =3D IDE controler 1, Slave
>=20
> Tomando estes cuidados, funciona perfeitamente.
> Espero ter ajudado,
> -------------------------------------------------
> Bruno Negrao - Network Manager
> Engepel Teleinform=E1tica. 55-31-34812311
>=20
>=20
>=20
>=20
> -------------------------------------------------------
> SF email is sponsored by - The IT Product Guide
> Read honest & candid reviews on hundreds of IT Products from real users.
> Discover which products truly live up to the hype. Start reading now.
> http://productguide.itmanagersjournal.com/
> _______________________________________________
> Mondo-devel mailing list
> Mon...@li...
> https://lists.sourceforge.net/lists/listinfo/mondo-devel
>=20


--=20
Andrew Latham

http://www.lathama.com
la...@gm...
la...@ya...
la...@la...
If any of the above are not working we have=20
bigger problems than my email.

Oi Carlos,
Vou responder a você em Português.

> o no se puede restablecer el backup en otra maquina con diferente 
> arquitectura de discos ?
Pode sim. Eu acabei de fazer este teste com sucesso nesta semana. Eu baixei 
o backup do meu RedHat 8.0 com HD SCSI numa outra máquina com HD IDE.

Você deve prestar atenção aos seguintes aspectos:
1 - No começo da restauração do backup, o mondorescue pede para você editar 
o filesystem table. Neste momento, você deve editar cada filesystem 
trocando "/dev/sdXX" para "/dev/hdXX". Por exemplo, se no seu computador 
SCSI o filesystem / está no dispositivo /dev/sda2, você deverá mudar o 
dispositivo para /dev/hda2. Você fez isto?

2 - Mudar o parâmetro passado ao kernel na hora do boot. Após a restauração 
do backup você provavelmente deverá mudar a string "hda=ide-scsi" para 
"hdc=ide-scsi". A linha inteira é assim:

    kernel /vmlinuz-2.4.20-8 ro root=LABEL=/ hdc=ide-scsi

Eu não sei como você atualiza isso usando o LILO pois meu boot loader é o 
GRUB. No caso do GRUB, esta linha fica no arquivo /boot/grub/grub.conf.

OBS: Dependendo de onde você conectar seu CD-ROM, o nome do dispositivo 
muda:
hda = IDE controler 0, Master;
hdb = IDE controler 0, Slave;
hdc = IDE controler 1, Master
hdd = IDE controler 1, Slave

Tomando estes cuidados, funciona perfeitamente.
Espero ter ajudado,
-------------------------------------------------
Bruno Negrao - Network Manager
Engepel Teleinformática. 55-31-34812311 

I am seeing the following message when attempting to do a mondo backup
to the local hard drive:

    Fatal error... Your CD-ROM drive is mounted. Please unmount it.

The CD-ROM drive is not mounted.  The only thing close are remote cdrom
drives shared via samba, but these are smbfs type devices, not iso
cdroms.  It should not really matter whether or not the cdrom drive is
mounted when just doing a local hard drive backup.

Mondo 2.04
Mindi 1.04
Mandrake 10.1, running as an LTSP server.

tail of mondo-archive.log

----------------------
...ran with res=256
                        [Main] libmondo-files.c->find_home_of_exe#423:
find_home_of_exe () --- Found cmp at /usr/bin/cmp
[Main] newt-specific.c->fatal_error#373: Fatal error received - 'Your
CD-ROM drive is mounted. Please unmount it.'
                [Main] newt-specific.c->fatal_error#394: OK, I think I'm
the main PID.
        [Main] newt-specific.c->fatal_error#403: I'm going to do some
cleaning up now.
                        [Main] newt-specific.c->fatal_error#404: killall
mindi 2> /dev/null
running: kill `ps wax | grep "/mondo/do-not" | awk '{print $1;}' | grep
-vx "\?"` > /tmp/mondo-run-prog-thing.tmp 2>
/tmp/mondo-run-prog-thing.err
--------------------------------start of
output-----------------------------
--------------------------------end of
output------------------------------
...ran with res=15

---------------

Thanks for any help on this.

Marc DeTrano

log file? both the backup and the resrtore that is in /tmp that will
need copied to a floppy.


On Wed, 24 Nov 2004 16:59:19 -0600, Marc DeTrano <ma...@gr...> wrot=
e:
> For the english speaking mondo gurus:
>=20
> -When trying to take a backup from a system with 3 hard drives running
> RedHat 7.3, and restore to a system with 2 IDE drives, (booting from the
> first CD-ROM), and modifying the the partition table accordingly,
> everything is fine until mondo reports that it could not create the Lilo
> configuration.  The logs say that it was unable to modify the files
> /mnt/RESTORING/etc/fstab, and ..lilo.conf
>=20
> Para Carlos:
>=20
> Esta usando la =FAltima versi=F3n de Mondo (creo que 2.04, y mindi 1.04)?
> Yo s=E9 de experienc=EDa que es poco dif=EDcil para transferir un sistema=
 a un
> nuevo arquitectura de discos.  Lo prob=E9 una vez, sin =E9xito.  Podr=EDa=
 dar
> un ejemplo de su fstab, antes y despues cambiarlo?
>=20
> Marc
>=20
>=20
>=20
>=20
> On Wed, 2004-11-24 at 11:46, Carlos Herrera wrote:
> > Muchas gracias por responder, mi problema es el siguiente :
> >
> > Saque un backup en una maquina PIV con 3 discos SCSI (RedHat Linux 7.3)
> > (sda,sdb y scd) a 9 CDRoms con Mondo
> >
> > Quiero restablecer el backup en otra computadora con 2 discos IDE ,
> > entonces booteo con el primer CDRom y edito la tabla de particiones par=
a
> > que se acomoden los montajes en mis 2 discos, todo pasa OK hasta el
> > final y luego me dice que no puede crear la configuracion de LILO,
> > cuando veo el log me doy cuenta que no ha podido modificar los archivos=
:
> >
> > /mnt/RESTORING/etc/fstab
> > y
> > /mnt/RESTORING/etc/lilo.conf
> >
> > Entonces no puedo restablecer mi sistema en otra maquina.
> > Esta bien lo que estoy haciendo ? o no se puede restablecer el backup e=
n
> > otra maquina con diferente arquitectura de discos ?
> > Mil gracias de antemano por la ayuda desde Peru !
> >
> > Marc DeTrano wrote:
> >
> > >Yo s=ED, hablo poco.  Y trabajo en Costa Rica con "nativos" que lo hab=
lan
> > >mejor.  =BFEn que puedo ayudarle?
> > >
> > >Marc DeTrano
> > >Gridshield, S.A.
> > >
> > >
> > >
> > >On Wed, 2004-11-24 at 10:22, Andrew Latham wrote:
> > >
> > >
> > >>Maybe but not me.......
> > >>
> > >>Spanish speakers pipe in.
> > >>
> > >>
> > >>On Wed, 24 Nov 2004 10:51:30 -0500, Carlos Herrera
> > >><che...@so...> wrote:
> > >>
> > >>
> > >>>Alguno de la lista habla espa=F1ol ?
> > >>>
> > >>>--
> > >>>
> > >>>Carlos Herrera
> > >>>Jefe de Sistemas
> > >>>Sonesta Posadas del Inca
> > >>>Pancho Fierro 194 San Isidro - Lima
> > >>>
> > >>>Sonesta Posadas del Inca - Peru
> > >>>Phone:  (511) 221-2121
> > >>>Fax:  (511) 221-2114
> > >>>Visit us at www.sonesta.com
> > >>>
> > >>>--------------------------------------------------------------------=
---------------------------------------------------------------------------=
---------------
> > >>>Discover the world.  One Sonesta at a time.
> > >>>There's nothing quite like a Sonesta.  Not even another Sonesta.  Ea=
ch upscale hotel reflects the culture and history of its unique location.  =
The perfect place to exhale.
> > >>>Boston =B7 Miami =B7 New Orleans =B7 Bermuda =B7 Brazil =B7 Egypt =
=B7 Tuscany . Peru  (Lima, Cusco, Sacred Valley, Lake Titicaca Puno, Arequi=
pa)
> > >>>www.sonesta.com
> > >>>--------------------------------------------------------------------=
---------------------------------------------------------------------------=
-------------------
> > >>>
> > >>>-------------------------------------------------------
> > >>>SF email is sponsored by - The IT Product Guide
> > >>>Read honest & candid reviews on hundreds of IT Products from real us=
ers.
> > >>>Discover which products truly live up to the hype. Start reading now=
.
> > >>>http://productguide.itmanagersjournal.com/
> > >>>_______________________________________________
> > >>>Mondo-devel mailing list
> > >>>Mon...@li...
> > >>>https://lists.sourceforge.net/lists/listinfo/mondo-devel
> > >>>
> > >>>
> > >>>
> > >
> > >
> > >
> > >-------------------------------------------------------
> > >SF email is sponsored by - The IT Product Guide
> > >Read honest & candid reviews on hundreds of IT Products from real user=
s.
> > >Discover which products truly live up to the hype. Start reading now.
> > >http://productguide.itmanagersjournal.com/
> > >_______________________________________________
> > >Mondo-devel mailing list
> > >Mon...@li...
> > >https://lists.sourceforge.net/lists/listinfo/mondo-devel
> > >
> > >
>=20
> -------------------------------------------------------
> SF email is sponsored by - The IT Product Guide
> Read honest & candid reviews on hundreds of IT Products from real users.
> Discover which products truly live up to the hype. Start reading now.
> http://productguide.itmanagersjournal.com/
> _______________________________________________
> Mondo-devel mailing list
> Mon...@li...
> https://lists.sourceforge.net/lists/listinfo/mondo-devel
>=20


--=20
Andrew Latham

http://www.lathama.com
la...@gm...
la...@ya...
la...@la...
If any of the above are not working we have=20
bigger problems than my email.

For the english speaking mondo gurus:

-When trying to take a backup from a system with 3 hard drives running
RedHat 7.3, and restore to a system with 2 IDE drives, (booting from the
first CD-ROM), and modifying the the partition table accordingly,
everything is fine until mondo reports that it could not create the Lilo
configuration.  The logs say that it was unable to modify the files
/mnt/RESTORING/etc/fstab, and ..lilo.conf

Para Carlos:

Esta usando la última versión de Mondo (creo que 2.04, y mindi 1.04)? 
Yo sé de experiencía que es poco difícil para transferir un sistema a un
nuevo arquitectura de discos.  Lo probé una vez, sin éxito.  Podría dar
un ejemplo de su fstab, antes y despues cambiarlo?  

Marc



On Wed, 2004-11-24 at 11:46, Carlos Herrera wrote:
> Muchas gracias por responder, mi problema es el siguiente :
> 
> Saque un backup en una maquina PIV con 3 discos SCSI (RedHat Linux 7.3) 
> (sda,sdb y scd) a 9 CDRoms con Mondo
> 
> Quiero restablecer el backup en otra computadora con 2 discos IDE , 
> entonces booteo con el primer CDRom y edito la tabla de particiones para 
> que se acomoden los montajes en mis 2 discos, todo pasa OK hasta el 
> final y luego me dice que no puede crear la configuracion de LILO, 
> cuando veo el log me doy cuenta que no ha podido modificar los archivos:
> 
> /mnt/RESTORING/etc/fstab
> y
> /mnt/RESTORING/etc/lilo.conf
> 
> Entonces no puedo restablecer mi sistema en otra maquina.
> Esta bien lo que estoy haciendo ? o no se puede restablecer el backup en 
> otra maquina con diferente arquitectura de discos ?
> Mil gracias de antemano por la ayuda desde Peru !
> 
> Marc DeTrano wrote:
> 
> >Yo sí, hablo poco.  Y trabajo en Costa Rica con "nativos" que lo hablan
> >mejor.  ¿En que puedo ayudarle?
> >
> >Marc DeTrano
> >Gridshield, S.A.
> >
> >
> >
> >On Wed, 2004-11-24 at 10:22, Andrew Latham wrote:
> >  
> >
> >>Maybe but not me.......
> >>
> >>Spanish speakers pipe in.
> >>
> >>
> >>On Wed, 24 Nov 2004 10:51:30 -0500, Carlos Herrera
> >><che...@so...> wrote:
> >>    
> >>
> >>>Alguno de la lista habla español ?
> >>>
> >>>--
> >>>
> >>>Carlos Herrera
> >>>Jefe de Sistemas
> >>>Sonesta Posadas del Inca
> >>>Pancho Fierro 194 San Isidro - Lima
> >>>
> >>>Sonesta Posadas del Inca - Peru
> >>>Phone:  (511) 221-2121
> >>>Fax:  (511) 221-2114
> >>>Visit us at www.sonesta.com
> >>>
> >>>--------------------------------------------------------------------------------------------------------------------------------------------------------------
> >>>Discover the world.  One Sonesta at a time.
> >>>There's nothing quite like a Sonesta.  Not even another Sonesta.  Each upscale hotel reflects the culture and history of its unique location.  The perfect place to exhale.
> >>>Boston · Miami · New Orleans · Bermuda · Brazil · Egypt · Tuscany . Peru  (Lima, Cusco, Sacred Valley, Lake Titicaca Puno, Arequipa)
> >>>www.sonesta.com
> >>>------------------------------------------------------------------------------------------------------------------------------------------------------------------
> >>>
> >>>-------------------------------------------------------
> >>>SF email is sponsored by - The IT Product Guide
> >>>Read honest & candid reviews on hundreds of IT Products from real users.
> >>>Discover which products truly live up to the hype. Start reading now.
> >>>http://productguide.itmanagersjournal.com/
> >>>_______________________________________________
> >>>Mondo-devel mailing list
> >>>Mon...@li...
> >>>https://lists.sourceforge.net/lists/listinfo/mondo-devel
> >>>
> >>>      
> >>>
> >
> >
> >
> >-------------------------------------------------------
> >SF email is sponsored by - The IT Product Guide
> >Read honest & candid reviews on hundreds of IT Products from real users.
> >Discover which products truly live up to the hype. Start reading now. 
> >http://productguide.itmanagersjournal.com/
> >_______________________________________________
> >Mondo-devel mailing list
> >Mon...@li...
> >https://lists.sourceforge.net/lists/listinfo/mondo-devel
> >  
> >

We are all wondering..... 

Ray what is happening? 


On Wed, 24 Nov 2004 11:21:25 -0700, Phillip Novess <pn...@ma...> wrote:
> All,
> 
> What is the current status with the website, future releases, or the project as a whole?
> 
> Thanks,
> Phill
> 
> 
> 
> On Wednesday, November 03, 2004, at 11:28AM, Dj <dj...@ei...> wrote:
> 
> >As I'm sure you're all aware, the mondorescue.org website is gone, and
> >replaced with this big banner shouting about the fastservers.net actions.
> >The most frustrating thing is that the link to the old index page does
> >not work (how hard would it have been to test this).  This is a great
> >inconvenience to say the least.  I mailed this Travis person complaining
> >  about the effect of his actions are having on the mondorescue project,
> >and i quote from a portion of his response:
> >
> >"......I don't understand what we're doing wrong, honestly.  We aren't
> >asking for anything besides a status update on the projects in related
> >to Ray's position-  nothing more, nothing less.  That includes the time
> >spent on Mondo while he was a part of the FastServers.Net Technical Group.
> >
> >Please let us know more about your perspective so I can get a feel of
> >how to more aptly handle this from our end.  I am attempting to be
> >responsive as possible, any way possible, as I realize Mondo is
> >extremely critical to a variety of persons, and business entities!
> >
> >I will be standing by-  I *want* to get this resolved immediately.  I am
> >doing my best to get an update from Ray & Hugo's side of the situation,
> >but as of yet, have heard nothing since Hugo's initial posting late last
> >week......"
> >
> >Now the above seems pretty reasonable to me, but I don't know all the
> >facts I guess.  If this guy is so hell bent on resolving the issue, and
> >can't understand what he is doing wrong, then surely it is not necessary
> >to remove the project from all the rest of us while it is being addressed.
> >
> >Could you please put back the site, and let Ray/Hugo and Travis respond
> >to each other, and settle their differences in a less disruptive manner.
> >
> >Or perhaps I'm a naive idiot and missing the point.  You tell me.
> >
> >Dj.
> >
> >
> >-------------------------------------------------------
> >This SF.Net email is sponsored by:
> >Sybase ASE Linux Express Edition - download now for FREE
> >LinuxWorld Reader's Choice Award Winner for best database on Linux.
> >http://ads.osdn.com/?ad_id=5588&alloc_id=12065&op=click
> >_______________________________________________
> >Mondo-devel mailing list
> >Mon...@li...
> >https://lists.sourceforge.net/lists/listinfo/mondo-devel
> >
> >
> 
> 
> -------------------------------------------------------
> SF email is sponsored by - The IT Product Guide
> Read honest & candid reviews on hundreds of IT Products from real users.
> Discover which products truly live up to the hype. Start reading now.
> http://productguide.itmanagersjournal.com/
> 
> 
> _______________________________________________
> Mondo-devel mailing list
> Mon...@li...
> https://lists.sourceforge.net/lists/listinfo/mondo-devel
> 


-- 
Andrew Latham

http://www.lathama.com
la...@gm...
la...@ya...
la...@la...
If any of the above are not working we have 
bigger problems than my email.

All,

What is the current status with the website, future releases, or the project as a whole?

Thanks,
Phill

On Wednesday, November 03, 2004, at 11:28AM, Dj <dj...@ei...> wrote:

>As I'm sure you're all aware, the mondorescue.org website is gone, and 
>replaced with this big banner shouting about the fastservers.net actions.
>The most frustrating thing is that the link to the old index page does 
>not work (how hard would it have been to test this).  This is a great 
>inconvenience to say the least.  I mailed this Travis person complaining 
>  about the effect of his actions are having on the mondorescue project, 
>and i quote from a portion of his response:
>
>"......I don't understand what we're doing wrong, honestly.  We aren't 
>asking for anything besides a status update on the projects in related 
>to Ray's position-  nothing more, nothing less.  That includes the time 
>spent on Mondo while he was a part of the FastServers.Net Technical Group.
>
>Please let us know more about your perspective so I can get a feel of
>how to more aptly handle this from our end.  I am attempting to be
>responsive as possible, any way possible, as I realize Mondo is
>extremely critical to a variety of persons, and business entities!
>
>I will be standing by-  I *want* to get this resolved immediately.  I am
>doing my best to get an update from Ray & Hugo's side of the situation,
>but as of yet, have heard nothing since Hugo's initial posting late last
>week......"
>
>Now the above seems pretty reasonable to me, but I don't know all the 
>facts I guess.  If this guy is so hell bent on resolving the issue, and 
>can't understand what he is doing wrong, then surely it is not necessary 
>to remove the project from all the rest of us while it is being addressed.
>
>Could you please put back the site, and let Ray/Hugo and Travis respond 
>to each other, and settle their differences in a less disruptive manner.
>
>Or perhaps I'm a naive idiot and missing the point.  You tell me.
>
>Dj.
>
>
>-------------------------------------------------------
>This SF.Net email is sponsored by:
>Sybase ASE Linux Express Edition - download now for FREE
>LinuxWorld Reader's Choice Award Winner for best database on Linux.
>http://ads.osdn.com/?ad_id=5588&alloc_id=12065&op=click
>_______________________________________________
>Mondo-devel mailing list
>Mon...@li...
>https://lists.sourceforge.net/lists/listinfo/mondo-devel
>
>

Muchas gracias por responder, mi problema es el siguiente :

Saque un backup en una maquina PIV con 3 discos SCSI (RedHat Linux 7.3) 
(sda,sdb y scd) a 9 CDRoms con Mondo

Quiero restablecer el backup en otra computadora con 2 discos IDE , 
entonces booteo con el primer CDRom y edito la tabla de particiones para 
que se acomoden los montajes en mis 2 discos, todo pasa OK hasta el 
final y luego me dice que no puede crear la configuracion de LILO, 
cuando veo el log me doy cuenta que no ha podido modificar los archivos:

/mnt/RESTORING/etc/fstab
y
/mnt/RESTORING/etc/lilo.conf

Entonces no puedo restablecer mi sistema en otra maquina.
Esta bien lo que estoy haciendo ? o no se puede restablecer el backup en 
otra maquina con diferente arquitectura de discos ?
Mil gracias de antemano por la ayuda desde Peru !

Marc DeTrano wrote:

>Yo sí, hablo poco.  Y trabajo en Costa Rica con "nativos" que lo hablan
>mejor.  ¿En que puedo ayudarle?
>
>Marc DeTrano
>Gridshield, S.A.
>
>
>
>On Wed, 2004-11-24 at 10:22, Andrew Latham wrote:
>  
>
>>Maybe but not me.......
>>
>>Spanish speakers pipe in.
>>
>>
>>On Wed, 24 Nov 2004 10:51:30 -0500, Carlos Herrera
>><che...@so...> wrote:
>>    
>>
>>>Alguno de la lista habla español ?
>>>
>>>--
>>>
>>>Carlos Herrera
>>>Jefe de Sistemas
>>>Sonesta Posadas del Inca
>>>Pancho Fierro 194 San Isidro - Lima
>>>
>>>Sonesta Posadas del Inca - Peru
>>>Phone:  (511) 221-2121
>>>Fax:  (511) 221-2114
>>>Visit us at www.sonesta.com
>>>
>>>--------------------------------------------------------------------------------------------------------------------------------------------------------------
>>>Discover the world.  One Sonesta at a time.
>>>There's nothing quite like a Sonesta.  Not even another Sonesta.  Each upscale hotel reflects the culture and history of its unique location.  The perfect place to exhale.
>>>Boston · Miami · New Orleans · Bermuda · Brazil · Egypt · Tuscany . Peru  (Lima, Cusco, Sacred Valley, Lake Titicaca Puno, Arequipa)
>>>www.sonesta.com
>>>------------------------------------------------------------------------------------------------------------------------------------------------------------------
>>>
>>>-------------------------------------------------------
>>>SF email is sponsored by - The IT Product Guide
>>>Read honest & candid reviews on hundreds of IT Products from real users.
>>>Discover which products truly live up to the hype. Start reading now.
>>>http://productguide.itmanagersjournal.com/
>>>_______________________________________________
>>>Mondo-devel mailing list
>>>Mon...@li...
>>>https://lists.sourceforge.net/lists/listinfo/mondo-devel
>>>
>>>      
>>>
>
>
>
>-------------------------------------------------------
>SF email is sponsored by - The IT Product Guide
>Read honest & candid reviews on hundreds of IT Products from real users.
>Discover which products truly live up to the hype. Start reading now. 
>http://productguide.itmanagersjournal.com/
>_______________________________________________
>Mondo-devel mailing list
>Mon...@li...
>https://lists.sourceforge.net/lists/listinfo/mondo-devel
>  
>

-- 

Carlos Herrera
Jefe de Sistemas
Sonesta Posadas del Inca
Pancho Fierro 194 San Isidro - Lima

Sonesta Posadas del Inca - Peru
Phone:  (511) 221-2121
Fax:  (511) 221-2114
Visit us at www.sonesta.com

--------------------------------------------------------------------------------------------------------------------------------------------------------------
Discover the world.  One Sonesta at a time.
There's nothing quite like a Sonesta.  Not even another Sonesta.  Each upscale hotel reflects the culture and history of its unique location.  The perfect place to exhale.
Boston · Miami · New Orleans · Bermuda · Brazil · Egypt · Tuscany . Peru  (Lima, Cusco, Sacred Valley, Lake Titicaca Puno, Arequipa) 
www.sonesta.com
------------------------------------------------------------------------------------------------------------------------------------------------------------------

Yo sí, hablo poco.  Y trabajo en Costa Rica con "nativos" que lo hablan
mejor.  ¿En que puedo ayudarle?

Marc DeTrano
Gridshield, S.A.



On Wed, 2004-11-24 at 10:22, Andrew Latham wrote:
> Maybe but not me.......
> 
> Spanish speakers pipe in.
> 
> 
> On Wed, 24 Nov 2004 10:51:30 -0500, Carlos Herrera
> <che...@so...> wrote:
> > Alguno de la lista habla español ?
> > 
> > --
> > 
> > Carlos Herrera
> > Jefe de Sistemas
> > Sonesta Posadas del Inca
> > Pancho Fierro 194 San Isidro - Lima
> > 
> > Sonesta Posadas del Inca - Peru
> > Phone:  (511) 221-2121
> > Fax:  (511) 221-2114
> > Visit us at www.sonesta.com
> > 
> > --------------------------------------------------------------------------------------------------------------------------------------------------------------
> > Discover the world.  One Sonesta at a time.
> > There's nothing quite like a Sonesta.  Not even another Sonesta.  Each upscale hotel reflects the culture and history of its unique location.  The perfect place to exhale.
> > Boston · Miami · New Orleans · Bermuda · Brazil · Egypt · Tuscany . Peru  (Lima, Cusco, Sacred Valley, Lake Titicaca Puno, Arequipa)
> > www.sonesta.com
> > ------------------------------------------------------------------------------------------------------------------------------------------------------------------
> > 
> > -------------------------------------------------------
> > SF email is sponsored by - The IT Product Guide
> > Read honest & candid reviews on hundreds of IT Products from real users.
> > Discover which products truly live up to the hype. Start reading now.
> > http://productguide.itmanagersjournal.com/
> > _______________________________________________
> > Mondo-devel mailing list
> > Mon...@li...
> > https://lists.sourceforge.net/lists/listinfo/mondo-devel
> > 
> 

On Thu, Nov 18, 2004 at 05:23:34AM -0800 or thereabouts, Mustafa Celik wrote:
> Attached.
> 
> --- Conor Daly <c....@me...> wrote:
> 
> > On Tue, Nov 16, 2004 at 03:54:33PM -0800 or
> > thereabouts, Mustafa Celik wrote:
> > > 
> > > Problem:
> > > I have run the mondoarchive and that created the
> > > mondorescue.iso, mindi.iso and 1.iso. I've burned
> > the
> > > mondorescue.iso on a CDR and tried to reboot with
> > it.
> > > It wouldn't reboot. I burned the mindi.iso, it
> > > wouldn't reboot either. Following error occurs at
> > some
> > > 
> > > Attached are the mindi.log.gz and
> > mondo-archive.log.gz


You said:

> > Following is the command I used to build the rescue
> > disks:
> > mondoarchive -Oi -s 650m -d /home/bkup/mondo -S
> > /home/bkup -T /home/bkup -D -g

This is a differential backup (using the '-D' switch).  Did you do a full
backup already?  Does this boot?  Did you burn the '1.iso' and attempt to
boot from that?  mondorescue.iso and mindi.iso are the same immediatly after
a backup but mindi.iso can change if you run mindi by itself.
mondorescue.iso should be used where your backups are on an nfs server, a
tape, or on a separate hard disk as ISOs.  If you're burning the backups to
CDR(W), you should boot with the CD burned from '1.iso'.

Conor
-- 
Conor Daly,                   Please avoid sending me 
Met Eireann, Glasnevin Hill,  Word or PowerPoint attachments.
Dublin 9, Ireland             http://www.fsf.org/philosophy/no-word-attachments.html
Ph +3531 8064276 Fax +3531 8064247


**********************************************************************
This e-mail and any files transmitted with it are confidential 
and intended solely for the addressee. If you have received
this email in error please notify the sender.
This e-mail message has also been scanned for the
presence of computer viruses.
**********************************************************************

Maybe but not me.......

Spanish speakers pipe in.


On Wed, 24 Nov 2004 10:51:30 -0500, Carlos Herrera
<che...@so...> wrote:
> Alguno de la lista habla espa=F1ol ?
>=20
> --
>=20
> Carlos Herrera
> Jefe de Sistemas
> Sonesta Posadas del Inca
> Pancho Fierro 194 San Isidro - Lima
>=20
> Sonesta Posadas del Inca - Peru
> Phone:  (511) 221-2121
> Fax:  (511) 221-2114
> Visit us at www.sonesta.com
>=20
> -------------------------------------------------------------------------=
---------------------------------------------------------------------------=
----------
> Discover the world.  One Sonesta at a time.
> There's nothing quite like a Sonesta.  Not even another Sonesta.  Each up=
scale hotel reflects the culture and history of its unique location.  The p=
erfect place to exhale.
> Boston =B7 Miami =B7 New Orleans =B7 Bermuda =B7 Brazil =B7 Egypt =B7 Tus=
cany . Peru  (Lima, Cusco, Sacred Valley, Lake Titicaca Puno, Arequipa)
> www.sonesta.com
> -------------------------------------------------------------------------=
---------------------------------------------------------------------------=
--------------
>=20
> -------------------------------------------------------
> SF email is sponsored by - The IT Product Guide
> Read honest & candid reviews on hundreds of IT Products from real users.
> Discover which products truly live up to the hype. Start reading now.
> http://productguide.itmanagersjournal.com/
> _______________________________________________
> Mondo-devel mailing list
> Mon...@li...
> https://lists.sourceforge.net/lists/listinfo/mondo-devel
>=20


--=20
Andrew Latham

http://www.lathama.com
la...@gm...
la...@ya...
la...@la...
If any of the above are not working we have=20
bigger problems than my email.

Alguno de la lista habla español ?

-- 

Carlos Herrera
Jefe de Sistemas
Sonesta Posadas del Inca
Pancho Fierro 194 San Isidro - Lima

Sonesta Posadas del Inca - Peru
Phone:  (511) 221-2121
Fax:  (511) 221-2114
Visit us at www.sonesta.com

--------------------------------------------------------------------------------------------------------------------------------------------------------------
Discover the world.  One Sonesta at a time.
There's nothing quite like a Sonesta.  Not even another Sonesta.  Each upscale hotel reflects the culture and history of its unique location.  The perfect place to exhale.
Boston · Miami · New Orleans · Bermuda · Brazil · Egypt · Tuscany . Peru  (Lima, Cusco, Sacred Valley, Lake Titicaca Puno, Arequipa) 
www.sonesta.com
------------------------------------------------------------------------------------------------------------------------------------------------------------------