Activity for VirtualDub2
-
Anonymous posted a comment on ticket #457
Use colorspace RBG32 in the script. VD only use 8b & 16b, IDK with other in input but it's enought, +24b it's useless... But if you installed all codec to read viveo/audio, you don't need any script except if VD don't have what you want in his filter...
-
RocketJet created ticket #458
REQ: VirtualDub2 - beep at end of processing.
-
Anonymous created ticket #457
Unsupported/Unproperly handled 24bit audio conversion to AAC
-
Anonymous created ticket #456
Automate Remove Frames filter 1st pass
-
Anonymous created ticket #455
frames are lost or not displayed when fast backward and pref frame.
-
Anonymous created ticket #454
4k file using Direct Stream Copy to AVI export - No Good
-
isidroco created ticket #453
internal h265 SAR setting
-
You can try opening the first file changing the input driver (Audio/video interleave vs Caching Input). Also you may try using 32bit VirtualDub2 intead of x64 version (you may configure it with AuxSetup.exe to Enbable LAA so it will be able to handle 4Gb of RAM instead of 2Gb).
-
Maybe you can try selecting your internal audio card for audio source,, and use it's line in.
-
I have same device. In capture mode, select Video, Set Custom Format: Data Format: MJPG; Use Custom Size: 1280x720; also in video, Compression, (No Recompression MJPG); is what I use. I obtained better and faster results with those settings than with fullHD, at least with my TV source broadcast.
-
I have same device. In capture mode, select Video, Set Custom Format: Data Format: Current MJPG; Use Custom Size: 1280x720; also in video, Compression, (No Recompression MJPG); is what I use. I obtained better and faster results with those settings than with fullHD, at least with my TV source broadcast.
-
I have same device. In capture mode, select Video, Compression, (No Recompression MJPG); also in video, Set Custom Format: Data Format: Current MJPG; Use Custom Size: 1280x720 is what I use. I'm sure that device is not able of real 1080p 60fps, it will give repeated frames.
-
It does work, I made a Batch available here for automatic processing, it includes the plugin: virtualdub-batch-video-deshake
-
Anonymous created ticket #452
No Video Source, No Audio Source
-
patbrownie posted a comment on ticket #447
Hello, txs a lot. VirtualDub stays awesome! Much Greetings, Patrick Op zo 8 mei 2022 19:45 schreef noreply@sourceforge.net: OK, this specific codec is not supported - but how to integrate the others? Avixdemux ships ffNvencH264 and ffNvencHEVC, could either those (I assume those are from FFMPEG like FFV1, Huffyuv, Prores are here) or the NVidia SDK be integrated? If not: has anyone setup those as external codecs (I guess you could then install the SDK locally, then point the external encoder to cuda.exe)...
-
Anonymous posted a comment on ticket #447
OK, this specific codec is not supported - but how to integrate the others? Avixdemux ships ffNvencH264 and ffNvencHEVC, could either those (I assume those are from FFMPEG like FFV1, Huffyuv, Prores are here) or the NVidia SDK be integrated? If not: has anyone setup those as external codecs (I guess you could then install the SDK locally, then point the external encoder to cuda.exe) and could share the .vprof file for configuration?
-
Michael Atkinson posted a comment on ticket #451
Sorry - should have said, 'I'd like to use deshaker - the video stabilizer extension for the previous version.
-
Deshaker
-
Anonymous posted a comment on ticket #371
Just checking in. Has there been any new versions or patches that have fixed the 64bit version of Virtualdub2?
-
Anonymous created ticket #449
No way to output video with unsigned PCM 16bit
-
A newer version of vsfilters can be found by installing KliteMegaCodecPack: x64 "c:\Program Files (x86)\K-Lite Codec Pack\Filters\DirectVobSub64\vsfilter.dll" x32 "c:\Program Files (x86)\K-Lite Codec Pack\Filters\DirectVobSub\vsfilter.dll" Copy to plugins32/64 VD folder and rename to .VDF
-
Anonymous posted a comment on ticket #162
Thanks it works!! MPEG Layer-3 still would not work for me.
-
Anonymous posted a comment on ticket #249
Thank's a lot Anonymous, it's working perfectly.
-
Anonymous created ticket #448
VD2 Crash when Appending video to existing file
-
v0lt posted a comment on ticket #446
As far as I know, high resolution and frequency formats are only supported in compressed format. With older webcams, choose MJPG instead of YUY2. Your device may be using a different codec (for example, H.264).
-
Nvidia graphics cards do not support Apple ProRes encoding. https://developer.nvidia.com/nvidia-video-codec-sdk
-
VirtualDub and GPU
-
Anonymous posted a comment on ticket #442
These days it should be no brainer
-
Anonymous created ticket #446
USB capture device stuck on 10 fps
-
Anonymous created ticket #445
Seek-slider to snap to keyframes by default
-
Anonymous created ticket #444
Adding a time stamp?
-
Anonymous posted a comment on ticket #395
Nope, no xvid. I tried the codec pack but it just happens with multiple codecs. H264.
-
Anonymous created ticket #443
AltGr <> ALt+Ctrl
-
John Clement posted a comment on a wiki page
Would you be willing to have an archive of other plugins for 32 bit and 64? There are so many that are useful, and sometimes they just evaporate becoming unfindable. On that I have archived on my computer is Dsharp, which is one of the best refocusing plugins, but without any docs or sources. It has vanished from the web. I have 2 which I fixed from the existing sources: Border control, Filter Blender. Both had some nasty defects. Border control wouldn't save/restore properly, and Filter Blender...
-
Anonymous posted a comment on ticket #441
including the .TS (Transport Stream) container
-
Anonymous posted a comment on ticket #350
"Streaks" are called combing, this is called by your source video being interlaced. Use deinterlacer with "double frame rate" and one of the three interpolating algorithms, Yadif is the best that VD has, bob is the simplest. Make sure you correctly set up field order, to verify, skip frame by frame - if the movement is consistent then your field order is correct, if it is like two frames forward one frame back, then it is incorrect and needs to be swiched to another one, there are only two options,...
-
Anonymous posted a comment on ticket #388
IVTC filter handles 2:3 pulldown removal just fine: https://www.youtube.com/watch?v=DneoPwa5faY
-
Anonymous created ticket #442
Support for containers other than AVI during capture
-
Anonymous created ticket #441
Program Stream and MPEG-2 support
-
Anonymous created ticket #440
Preview aspect ratio during capture
-
Anonymous posted a comment on ticket #173
cli: the multiplexing proces falid with error code 1 (00000001). can anyone give me explanations for this error in the external code
-
Anonymous created ticket #439
Field order in the metadata
-
Hi Gilles, that wasn't the question. For capture, as in most programs (ie: audacity, adobe audition, etc) levels are set by windows mixer. In edit mode there is: volume and conversion, or an advanced filtering with time stretch, resample, gain, filters, etc. Personally if audio processing is required, I always extract to WAV, do all audio processing on CoolEdit, and then remux when doing final A+V compress.
-
Hi Gilles, that wasn't the question. For capture, as in most programas (ie: audacity, adobe audition, etc) levels are set by windows mixer. In edit mode there is: volume and conversion, or an advanced filtering with time stretch, resample, gain, filters, etc. Personally if audio processing is required, I always extract to WAV, do all audio processing on CoolEdit, and then remux when doing final A+V compress.
-
Gilles posted a comment on ticket #412
Hello, Does it mean VDub2 has no way to increase/decrease audio volume while editing, and relies on Windows' meter? Thank you.
-
Chris Wanger created ticket #438
Serious BUg: in YUV I42 color space. Swap U and V
-
Mox Falder posted a comment on ticket #437
crashinfo.txt attached. Also found an issue while converting fps: 59.** to fps: 25 was getting stuttering in the result. It could be a bad source file - can't provide, already removed.
-
Anton Shekhovtsov posted a comment on ticket #437
yes, please attach it as file, don't paste whole text
-
Crash reason: Integer Divide-by-Zero
-
It is weird, have no idea how can I help here. Maybe try to change video settings in the main menu: https://sourceforge.net/p/vdfiltermod/wiki/display/
-
Casteilla Pierre created ticket #436
No video source
-
Anonymous created ticket #435
RE #434 Remove Frames Plugin (fps)
-
Video->Filters->Show frame rates (checkbox)
-
Anonymous created ticket #434
Remove Frames Plugin (fps)
-
Alexander created ticket #433
Sound notification
-
Thanks Anton, I know you are busy to pay attention to vdub2, but anyway, I hope that some simple stuff can be added with little effort.
-
"Anonymous", this is an open forum, you may recieve other users answers. As I said, DirectStreamCopy works on some lossless formats, and VirtualDub is still very useful as is. What you are asking requires heavy non paid work.
-
Well, I see how this is frustrating. But since the development is on huge pause I cant fix anything now or tomorrow and this means there is nothing to reply except "I'll se this when I can" which is quite boring.
-
It doesnt matter, I read everything but honestly I can't tell much, sorry.
-
Anonymous posted a comment on ticket #430
Excuse me again, this post is directed at Anton Shekhovtsov
-
I have a clue why this happens, probably the feature to skip error dialogs was broken in some version.
-
parameter to exit without any dialog on error
-
I never paid much attention to DShowInputDriver, maybe tried it once and was dissatisfied. I'm under impression it is not worth it.
-
Anonymous posted a comment on ticket #431
Excuse me I should have directed the question at Anton Shekhovtsov. It is a question to see if he could give solution for why DShowInputDriver.vdplugin v0.9.3.0 doesn't work ATM with VD2 and if he could update it to work with VD2. DShowInputDriver.vdplugin is a Video-Audio Input Driver that would allow users to load video and audio directly into VD2. The more options the user has, better for VD2 for having them.
-
parameter to exit without any dialog on error
-
Audio/Video Interleave interface is good for MJPEG, HUFFYUV and other all keyframes formats. VDub is still useful for full processing, scrips, etc, understanding it's limitations. As nobody is getting paid for this you may try to add those missing features yourself instead :)
-
Did you tried to use it on an older VDub version to see if it works? If so, you may transcode to a lossless (Lagarith) codec and then reopen it on modern vdub2.
-
Anonymous created ticket #431
DShowInputDriver.vdplugin
-
Anonymous created ticket #430
Virtualdub2 Video Editor
-
It's quite easy to make simple fade from/to solid color only (usually black). If you need this, add "fill" filter, then use filters->blending.. dialog, apply opacity curve. Blending A [B] marker means that a filter is being blended. When blending is active, the Curve Editor in the main view can be used to blend the result of the filter in and out over time.
-
There is a trick (some people found it too difficult) to reverse video only (not the sound): use fflayer filter, point it the file you want to reverse, set follow timeline from to last frame number, rate -1.
-
Anonymous posted a comment on ticket #429
Yes, there is, actually. You will need Avisynth Plus to do this. The original Avisynth is incompatible with VirtualDub 2. I would also recommend downloading AVSEdit Plus. For me this was a godsend. Not only does it let you easily interact with the scripts that you've created. But it also provides templates for all other types of scripts so that you never have to write them down, memorize them, or look them up on the internet again. Truly, a magnificent tool.
-
Anonymous posted a comment on ticket #428
I would assume that you're trying to use the original Avisynth to do this as VirtualDub 2 does not have a native fading filter. Avisynth is incompatible with VirtualDub 2. And it will continue to give you an error message if you try using your scripts with it installed. However, if you upgrade to Avisynth Plus, then it will work just fine. Can't use an old engine with a new car after all. ;-)
-
Anonymous posted a comment on ticket #429
Is there a way to reverse a video in VIrtualDub2?
-
Anonymous created ticket #429
Is there a way to reverse a video in VIrtualDub2?
-
Anonymous posted a comment on ticket #428
Pretty much what the title says. How do I fade a video in or out in VirtualDub2?
-
Anonymous created ticket #428
How to fade in/out a video?
-
Anonymous posted a comment on ticket #269
Hi Anton, just wanna ask again to improve the internal Logo filter / fflayer filter.So the first important thing to add would be a quick logo mover via mouse itself to set new positions without using the +/- keys.You should add a faster method.Also the method on fflayer by using shift+click is bad and not accurate.Better would be a shift or strg+mouse hold button down to move the logo to a exactly desired point anywhere on the video and that would be much faster instead using those position buttons...
-
I'll give it a shot. Thank you.
-
No shortcut. Btw have you tried File->export->stream copy, it is very close to what ffmpeg does if you just need to cut.
-
Anonymous posted a comment on ticket #427
Thanks Is there a keyboard shortcut to copy the timeline into the clipboard?
-
Maybe this can help: Preferences->Timeline, change "Info text" to just %t Then you can right-click and copy timeline info.
-
Anonymous created ticket #427
Copy start/end marks to clipboard?
-
Michael R Izquierdo posted a comment on ticket #426
Running ffprobe I get: [h264 @ 0000024e1c5de600] separate color planes are not supported Last message repeated 2 times [h264 @ 0000024e1c5de600] SPS decoding failure, trying again after escaping the NAL [h264 @ 0000024e1c5de600] separate color planes are not supported Last message repeated 2 times [h264 @ 0000024e1c5de600] sps_id 0 out of range
-
Can't open AVC High 4:4:4 Predictive @ L5.1 CABAC / 4 Ref Frames
-
Warn before overwriting in capture
-
Deinterlacing should only be used for broadcast videos where all frames are interlaced, NEVER for movies which have been telecined. Movies are telecined to add one extra frame for every 4 to convert from 24fps to 30fps for creating NTSC videos. Deinterlacing will still leave duplicate frames and sometimes multiple duplicates in a row. This will cause even more judder and make good spot removal impossible for plut-ins, and more difficult for manual frame by frame removal. As to deinterlacing, the...
-
Anonymous created ticket #424
Export single image uses wrong file name after new video file
-
Anonymous posted a comment on ticket #420
VD2 (& the original VD) it's a very old good freeware from Win XP/7 & so for "new" video/audio support from "2021", that will be complicated because I think the creator of VD2 it's not the same for the original VD... Anyway that was simple to search on the net & so do it & you will find how to do with Avisynth to do manything that VD2 can't do it...
-
Anonymous posted a comment on ticket #421
Before encode a DVD movie, you need to rip it in one single files... Use DVDShrink, it's a very old freeware from Win XP/7, you can normally find it every where or go to the official website & download it for 5$... One of the best & most easy, it don't encode because it's a raw copy video/audio... After that if always a problem, use MKVToolNix & then VD2 can read it without any problem...
-
Anonymous posted a comment on ticket #422
Hum... Why do you just not use the filter "deinterlace"? I use it for any DVD from any zone & I don't have any problem...
-
Save input driver on pending works.
-
¿How did you open DVD? ¿Did you try to open it with caching input driver? Maybe installing DTS_AC3_Source_Filter_x32 will enable it. MakeMKV may help you to direct copy DVD to PC for later processing.
-
Detelecining videos
-
AC-3 not decoded for DVD
-
You still don't get it. Duplicate frames don't take any space at all on H264. You won't reduce file size by decimating. As I tried to explain before. A whole bunch of frames are compressed taking in account very little is changed from one frame to another. You can erase 4 every 5 frames on all video, and final h264 size would still be 99% of the original h264 you tried to reduce. Please stop insisting on this.
-
You still don't get it. Duplicate frames don't take any space at all on H264. You won't reduce file size by decimating. As I tried to explain before. A whole bunch of frames are compressed taking in account very little is changed from one frame to another. You can erase 4 every 5 frames on all video, and final h264 size would still be the 99% of the original h264 you tried to reduce. Please stop insisting on this.
-
Anonymous posted a comment on ticket #417
New codecs won't be able to improve, I would say that just yet computers ever evolving. Just need someone with different ideas to move compression into another direction. That said as you say its about hardware as always was to decode the frames fast enough. Encoders already use CPU or today GFX. There was a great con GFX devices of long ago with AGP when they touted capabilities such as a zillion of GFlops and a whole lot more besides more but didn't do encoding why was that I sometimes wonder!....
-
My answer stands for all compressors which uses previous and optionally future frames as a base to achieve high compression as XVID, DIVX, H264. H265 was an example, H264 works exactly the same way. H265 doesn´t have limitations, players and devices have. New codecs won´t be able to improve a lot. Eventually new hardware will be able to encode decode faster, but size improvements will be marginal. h265 have same quality at a smaller size, at the prize of high cpu use. But maybe a 30% size saving...