[go: up one dir, main page]
Skip to content

TV Flexible Readout Block/Secondary Vac. Box Implementation + Symlink of XML into TV/common

Dan Thompsonrequested to merge
TV_DAQBlock+Box into master

A combined branch of previous work on "conservative readout" and "secondary vacuum interface" studies. Combining changes in branches veloU2_conReadoutNew and veloU2_conReadoutNew_preRebase.

The main changes are in the paramaters.xml, and fundamentally change the FEHybrids, converting them into "readout blocks" with copper routing connecting them to the ASICs. For that reason, this is a new TV version rather than adding to the scoping baseline model.

The secondary vacuum interface is a brand new component "TV:DAQBox", switched off by a new TV:ActivateDAQVacuumBox variable in all parameter files

Detailed View at Geometry image

Settings used in this MR (example):

  • Shift of 85mm, barrier rad = 12cm, max ASIC->readout block distance ~ 10cm
  • 60mm x 40 x 0.4 mm readout block, representing DC/DC conv. + lpgbt and vtrx+ for control
  • 0.2mm thick copper "routing" making connection
  • 2.5mm thick aluminium box vacuum interface
  • 5mm thick Al. vacuum flanges at each module z
  • Half density LV cables from edge of readout bloc
  • No horizontal separation between the DAQ blocks (see example below) These can be tuned logically

Fixes before merge-ready:

  • Remove overlaps with better cutouts
    • This has been achieved by cutting out a horizontal section where the pipes are
  • Add parameter for split readout block
    • Added TV:ConReadoutSplitBlocks to facilitate this
  • Propagate changes to xml to baseline/low folders so the only difference between versions is the parameters.xml file

The splitting of the substrate into two module halves is priority for the iris design and this will come in a subsequent MR. The split of the readout block from back to back is included as this is easy and flexible. Adding gaps to TV:DAQBox requires significant work to create a complex realistic shape with thicker structural regions + thinned regions, and needs integrating with !649 for a full "iris" design.

View with TV:ConReadoutSplitBlocks = 70mm image

Isolating Changes from the XML Re-Structuring

An edit to master has been made to show what we have actually changed for the addition of the "DAQ block" version of the geometry, with comparison here.

Testing the New Features

The new features are fully described in compact/components/TV/branch-run5-baseline/parameters.xml, but are deactivated by default. Below is a version of parameters.xml with the DAQ block/box turned on, as well as a diff that can be applied with git apply apply_TVDAQBlockBox.diff to turn on an example set of the changes possible.

Validated by

  • Core Software
  • RTA
  • Simulation
Edited by Sebastien Ponce

Merge request reports