Open Source Embedded Systems Software

Alt-F provides a free and open source alternative firmware for the DLINK DNS-320/320L/321/323/325/327L and DNR-322L. Alt-F has Samba and NFS; supports ext2/3/4, VFAT, NTFS, BTRFS; RAID 0, 1, 5 (with external USB disk) and JBOD; supports up to 8TB disks; rsync, ftp, sftp, ftps, ssh, lpd, DNS and DHCP servers, DDNS, fan and leds control, clean power up and down... and more. Alt-F also has a set of comprehensive administering web pages, you don't need to use the command line to configure it. Besides the built-in software, Alt-F also supports additional packages on disk, including ffp and Entware packages, that you can install, update and uninstall using the administering web pages Alt-F is being developed and tested on a DNS-323-rev-A1/B1, a DNS325-rev-A1, a DNS-320L-rev-A1 and on a DNS-327L-rev-A1 hardware boards. Other models and boards are said to work. Support Forum: http://groups.google.com/group/alt-f Homepage: http://sites.google.com/site/altfirmware

FreeNFS is a NFS 2.0 and 3.0 Compliant Server for Windows. FreeNFSE is a NFS 2.0 and 3.0 Compliant Server for Windows to a Embedded System Client. Adding more protocols to better serve embedded systems and video streaming. Insure to read the Blog, for current information on whats new!

BSD Router Project (BSDRP) is a open source router distribution based on FreeBSD, supporting all majors routing protocols (RIP, OSPF, BGP, ISIS, PIM, etc..) and multi-tenant capabilities that fit on a 4GB Flash disk.

Open Source SW/HW Project for Embedded Ethernet Applications. Works with AVR ATmega256/128/103, AVR32, SAM7X, SAM7S(E), SAM9, AT91X40, GameBoy Advance, Cortex M3 / M4 (STM32, NXP LPC, LM3S), Freescale Coldfire, RTL8019AS, LAN91C111, CS8900 and DM9000E chips. Offers a tiny TCP/IP stack including HTTP, FTP and DHCP.

Alternative firmware and software with open source for platforms based on the SoC Realtek RTL8186. Альтернативная прошивка и ПО с открытым кодом для платформ на базе SoC Realtek RTL8186.

IpWay/HOST is a real time tcp/ip stack library designed for embedded applications on 32bit microcontrollers ARM and PPC based (STM32Fx, SPC56x, SPC57x, SPC58x), where execution efficiency and compact code are important requirements. IpWay/HOST is characterized by high portability, compact size, copyless feature (also for TCP applications) and Checksum offload. Moreover, IpWay offers a 100% compatibility with AUTOSAR MCAL versions 4.13 and 4.2.x. IpWayStudio is a free ARM development environment based on Open Source tools and components. It has been created in order to support the development of IpWay itself and is now available as a free download. Everything is required to start working with IpWay is encapsulated in a single download. It takes just two minutes to have your development board working with IpWay.

nwEPC is a free and open source framework software implementation of SAE/EPC Serving Gateway or SGW and Packet Data Network Gateway or PGW, which is sometimes referred as SAE-Gateway as well.

This project includes both the libraries and applications created by Anturi Technology to communicate with Tag4M devices provided by Cores Electronic LLC. We want integrators and developers have the tools to build their own developments with Tag4M.

This is a Dynamic C port of the BACnet stack at http://sourceforge.net/projects/bacnet. This BACnet library provides a BACnet application layer, network layer and MAC layer communications services for systems based on the Rabbit 4000, 5000 and 6000 processors. The rich feature set of the BACnet stack provides an ideal platform for developing Rabbit based control devices which can use the many BACnet tools out there to reduce the development time and effort.

COM Serial Terminal Update: Support COM Trigger Transmitting Win32/64 Ver

This tool is used to develop small applications that can run on MIPS-based embedded Linux devices - mainly WLAN routers. It is possible to debug these applications using GDB with the GDB backend provided by this tool.

Software system for FlowScreen Router, with SempGate FPGA firmware and Intel EP80579 based board, it implements a high performance (1.5M pps network traffic) router system with open architecture for 3-rd party network application development.

A kernel written by Merck Hung. IA32 architecture, 32-bit protected mode, Memory paging, Keyboard, Timer Interrupt Handling, and a simple kernel shell to operate. Written in C language, development under Linux environment.

Design and implementation of silicon and software for baseband processors conforming to IEEE wireless standards. Initial focus on WiMAX and WiFi.

P O B I C O S - Platform for Opportunistic Behaviour in Incompletely Specified, Heterogeneous Object Communities (www.ict-pobicos.eu)

PyCI is a web-based configuration interface written in Python for systems running OpenWRT.

This project contains an example Code of an Ethernet Network Driver for the Sercos III network which will communicate with help of the unified communication channel. This driver connects the UC Channel (CoSeMa API) to e. g. a VxWorks TCP/IP stack.

Simple Lossless Ad-hoc Protocol (SLAP) is designed to be used for wireless digital data transfer on embedded systems. The program is built for uClinux, a derivative of Linux designed for embedded microcontrollers, but can be easily ported.

Titan allows service-oriented processing of context recognition applications on Wireless Sensor Networks. It includes an execution environment developed for TinyOS and a Java ME (Personal Profile) Network Manager intended to be run on a mobile phone.

A QT based GUI app that binds to a range of UDP ports and listens. The first time data arrives on a given port, a new tab is created inside the guy and the incoming data is displayed in a read-only text edit. File logging available for each port.

WSNFuse provides an abstraction layer for wireless sensor networks, allowing to expose one or many WSNs by means of different access technologies(e.g.: filesystem, JMS, RMI, Smart-Spaces, etc.).Its plugin-based architecture allow users to develop and adopt thei own plugins and configure WSN fuse to better suit their needs. This project has been partially supported by the CHIRON EU research project co-financed by the artemis joint undertaking (http://www.chiron-project.eu/) .

nwGTPv2 is free and open source implementation of GPRS Tunneling Protocol version 2 (GTPv2) or Evolved GTP (eGTP). GTPv2 is primarily used for control signalling between Serving Gateway SGW and PDN Gateway (PGW) in Evolved Packet Core (EPC).

openchronos-ng is a major rework of openchronos. Compared to openchronos it has the following features: * system message bus for system<->module communication. * hardware RTC timekeeping (no more clock inaccuracy). * rework of timer and ports drivers. * implementation of a module system (drop in applications). * rework of the display routines. * rework of the menu system. The firmware code is also conceptually simpler and smaller which leaves room for more modules (applications).

This projected was created to help IT professionals pull workstation information from their internal networks and upload the information to a specified database. Problem: Auditing IT assets manually takes weeks to log the individual information by hand. Solution: Capture the data over the network and store it for reports.

Firmware to run the TrendNET TEW-652BRP version 2.x wireless router in client mode. Based on GPL firmware provided by TrendNET and modified to change the operating mode of the router from Access Point to wireless client.