ผลิตภัณฑ์ที่ถูกขึ้นรูป และแม่พิมพ์สำหรับการทำผลิตภัณฑ์ที่ถูกขึ้นรูปต่างถูกเปิดเผยไว้ผลิตภัณฑ์ที่ถูกขึ้นรูปนี้เป็นเครื่องสุขภัณฑ์ ดังเช่น อ่างอาบน้ำแบบน้ำวนผลิตภัณฑ์ที่ถูกขึ้นรูปนี้ประกอบด้วยขอบเชิงที่แกร่งที่มีด้านที่ตกแต่ง และด้านที่ไม่ตกแต่ง วัสดุแข็งตัวถูกฉาบเคลือบบนขอบเชิงที่แกร่ง และขึ้นรูปเป็นชิ้นเดียวกันของขอบฐานหาระดับบนด้านส่วนก้นของขอบเชิงที่แกร่ง แอ่งแบบคิ้วหุ้มสำหรับการแนบติดกระบัง และบริเวณคิ้วหุ้มสำหรับการติดมอเตอร์ทำน้ำวนอาจถูกขึ้นรูปเป็นชิ้นเดียวกันในวัสดุที่แข็งถูกเคลือบบนของเชิงที่แกร่ง แม่พิมพ์สำหรับการผลิตนี้รวมถึงจำนวนหนึ่งของโพรงสำหรับขึ้นรูปขอบหาระดับบนด้านส่วนก้นของผลิตภัณฑ์ที่ถูกขึ้นรูปโพรงที่เพิ่มเติมอาจถูกรวมอยู่ในแม่พิมพ์สำหรับขึ้นรูปบริเวณคิ้วหุ้ม และแอ่งแบบคิ้วหุ้มบนผลิตภัณฑ์ที่ถูกขึ้นรูป molded products And the molds for making the molded products are revealed. This molded product is a sanitary ware. Like a whirlpool bathtub, this molded product consists of a rigid edge with decorative sides. and the unadorned side The hardened material is coated on the tough edge. and molded into one piece of the leveled base edge on the butt side of the rigid edge Eyebrow-covered basin for attaching to the visor. And the trim area for mounting the vortex motor may be molded into one piece in a rigid material coated on a rigid foot. This production die includes a certain number of cavities for forming a leveling edge on the bottom side of the molded product. Additional cavities may be included in the molding dies for the cladding. and eyebrow basins covered on molded products
Claims (8)
1.ผลิตภัณฑ์ที่ถูกขึ้นรูป ประกอบด้วย: ขอบเชิงที่แกร่งซึ่งมีด้านที่ตกต่างและด้านซึ่งไม่ตกแต่ง ขอบเชิงที่แกร่งดังกล่าวถูกประกอบด้วยผนังด้านล่าง ผนังด้านซ้ายและด้านขวา และผนังด้านปลายคู่หนึ่ง ขอบเชิงที่แกร่งซึ่งยังประกอบด้วยส่วนภายในและส่วนภายนอก ส่วนภายในและส่วนภานนอกดังกล่าวซึ่งถูกกำหนดโดยผนังด้านล่างดังกล่าว ผนังด้านซ้านและด้านขวาดังกล่าว และผนังด้านปลายดังกล่าว และในที่ซึ่ง ด้านซึ่งตกแต่งดังกล่าวสอดคล้องกับส่วนภานในดังกล่าว และด้านซึ่งไม่ตกแต่งสอดคล้องกับส่วนภานนอกดังกล่าว การเคลือบแกร่งชั้นเดียวบนด้านซึ่งไม่ตกแต่งดังกล่าว ขอบขอบดังกล่าวซึ่งถูกขึ้นรูปเป็นส่วนภายนอกซึ่งถูกทำให้แข็ง การเคลือบแข็งดังกล่าวครอบคลุมด้านซึ่งไม่ได้ตกแต่งทั้งหมด และ ขอบฐานหาระดับซึ่งถูกขึ้นรูปบบรวมเป้นชิ้นเดียวกัน ในส่วนด้านนอกซึ่งถูกทำให้แข็งดังกล่าวบนด้านล่างของขอบเชิงที่แกร่งดังกล่าว1. The molded products consist of: rigid angular edges with contrasting and non-decorative sides. Such a strong pediment was composed of the bottom wall. The left and right walls And a pair of end walls Toughened edge that also consists of internal and external parts. The aforementioned interior and exterior, which are defined by the walls below it. The left and right walls And the aforementioned end wall and where the decorative side corresponds to the said interior And the side which is not decorated in accordance with the outside part Single tough coating on the non-decorative side The edge of the edge, which is formed as the external part, has been hardened. The hard coating covers the completely unadorned side and the leveling edge, which is molded together in one piece. In the outer, hardened, on the underside of the hardened edge.2.ผลิตภัณฑ์ที่ถูกขึ้นรูปของข้อถือสิทธิ ข้อ 1 ในที่ซึ่ง การเคลือบแข็งดังกล่าว ถูกขึ้นรูปจากวัสดุโพลิเมอร์ที่สามารถแข็งตัวได้2. The molded product of claim 1, where the hard coating It is molded from a solid polymer material.3.ผลิตภัณฑ์ที่ถูกขึ้นรูปของข้อถือสิทธิ ข้อ 2 ในที่ซึ่ง ขอบเชิงที่แกร่งดังกล่าว ซึ่งถูกสร้างขึ้นจากวัสดุโลหะ พลาสติก ไฟเบอน์กลาส หรือโพลิเมอร์3.Products that are formed of claim 2, where such a strong margin Which are made up of metal, plastic, fiberglass or polymer materials.4.ผลิตภัณฑ์ที่ถูกขึ้นรูปของข้อถือสิทธิ ข้อ 3 ในที่ซึ่ง ผลิตภัณฑ์ที่ถูกขึ้นรูปดังกล่าวเป็นเครื่องสุขภัณฑ์4. The molded product of claim 3 where the molded product is sanitary ware.5.ผลิตภัณฑ์ที่ถูกขึ้นรูปของข้อถือสิทธิ ข้อ 4 ในที่ซึ่ง เครื่องสุขภัณฑ์เป็นอ่างอาบน้ำ อ่างอาบน้ำแบบน้ำวน หรือ พื้นอ่างรับน้ำจากฝักบัว5.Product formed of claim 4, where the sanitary ware is a bathtub Whirlpool or bathtub floor to receive water from shower.6.ผลิตภัณฑ์ที่ถูกขึ้นรูปของข้อถือสิทธิ ข้อ 1 ในที่ซึ่ง ขอบฐานหาระดับรวมถึงชุดของขอบที่แผ่ออกตามความยาว ซึ่งถูกจัดวางจากปลายหนึ่งถึงปลายหนึ่ง บนผนังด้านล่างดังกล่าว ขอบขอบเชิงที่แกร่งดังกล่าว6. The molded product of claim 1, where the base edge is leveled, including a set of edges extended along its length. Which is arranged from one end to one end On the wall below it Such a strong base edge7.ผลิตภัณฑ์ที่ถูกขึ้นรูปของข้อถือสิทธิ ข้อ 1 ยังรวมต่อไปถึงบริเวณคิ้วหุ้ม ซึ่งถูกขึ้นรูปแบบรวมเป็นชิ้นเดียวกันในส่วนภายนอกที่ถูกทำให้แข็งตัวดังกล่าว บนขอบเชิงที่แกร่งดังกล่าว สำหรับการติดวัตถุกับส่วนภายนอกซึ่งถูกทำให้แข็งตัวดังกล่าว และซึ่งมีความหนา หนากว่า ความหนาขอบพื้นที่บริเวณโดยรอบของส่วนภายนอกซึ่งถูกทำให้แข็งตัวดังกล่าว7. The molded product of Clause 1 also extends to the eyebrows. Which was formed into one piece in the said hardened outer part. On the edge of such a strong For attaching objects to the external parts that have been hardened. And which is thicker than the thickness of the surrounding area of the external part which has been hardened8.ผลิตภัณฑ์ที่ถูกขึ้นรูปของข้อถือสิทธิ ข้อ 1 ยังรวมต่อไปถึง แอ่งแบบคิ้วหุ้มซึ่งถูกขึ้นรูปแบบรวมเป็นชิ้นเดียวกันในส่วนภายนอกซึ่งถูกทำให้แข็งดังกล่าวบนขอบเชิงที่แกร่งดังกล่าว8.The molded products of claim 1 also include: The sheathed basins, formed into one piece, are hardened in the external parts on the edge of the strength.
TH9301001970A1993-10-29
A bathtub with a base that has been molded into one piece.
TH7506B
(en)