Claims (5)
เปลือกที่มีไขมันเป็นสารพื้นที่รับประทานได้ซึ่งประกอบรวมด้วย : ส่วนรองรับบรรจุภัณฑ์ซึ่งมีรูปร่างตามต้องการที่ระบุปริมาตรภายในนั้น ; และ ผนังหนึ่งอันหรือมากกว่าที่มีความหมายกลมกลืนที่ถูกสร้างโดยตรงบนส่วนรองรับบรรจุ ภัณฑ์จากปริมาณของสารผสมขึ้นรูปเปลือกที่รับประทานได้ ซึ่งประกอบรวมด้วยไขมันหนึ่งชนิด หรือมากกว่าซึ่งสารผสมมีความหนืดพลาสติคประมาณ 10 ถึง 40 ปัวส์และค่าคลากประมาณ 50 ถึง 250 ดายน์/ซม2 ก่อนการขึ้นรูปเปลือกบนส่วนรองรับ 2.เปลือกที่มีไขมันเป็นสารพื้นที่รับประทานได้ของข้อถือสิทธิข้อ 1 ซึ่งมีผนังที่มีรูปร่าง ของถ้วย กรวยหรือที่รองส่วนบนเปิดอย่างอื่นและซึ่งประกอบรวมเพิ่มขึ้นด้วยสิ่งบรรจุที่อย่าง น้อยที่สุดถูกสงวนไว้เป็นบางส่วนภายในหรือบรรจุอย่างสมบูรณ์ในเปลือกซึ่งสิ่งบรรจุคือขนมหวาน หรือขนมหวานที่มีความเย็น 3 .เปลือกที่มีไขมันเป็นสารพื้นที่รับประทานได้ของข้อถือสิทธิข้อ 2 ซึ่งขนมหวานที่มี ความเย็นประกอบด้วยไอศกรีม โยเกิร์ตแช่แข็ง เชอร์เบทหรือวอเทอร์ ไอซ์ และปรากฏอยู่ใน ปริมาณที่ขยายพ้นส่วนบนสุดที่เปิดของที่รองรับดังนั้นถูกเตรียมให้มีเป็นมวลที่ถูกเผยออกสำหรับการ บริโภคที่ง่าย ซึ่งสารผสมอย่างที่เลือกได้ประกอบรวมด้วยสารสร้างอิมัลชันในปริมาณไม่มากกว่า 1% โดยน้ำหนักของสารผสม สารให้ความหวานหรือทั้งสองอย่าง 4.เปลือกที่มีไขมันเป็นสารพื้นที่รับประทานได้ของข้อถือสิทธิข้อ 3 ซึ่งสารสร้างอิมัลชัน และสารให้ความหวานปรากฏอยู่ ด้วยสารสร้างอิมัลชันซึ่งประกอบรวมด้วยเลซิธิน, แอมโมเนียม ฟอสฟาไรด์,พอลิกลีเซอริล,พิลิริซิโนลีเอท,เอสเทอร์ของกรดซิทริคของโมโนกลีเซอไรด์หรือ การรวมกันของมัน และสารให้ความหวานซึ่งประกอบรวมด้วยน้ำตาล น้ำผึ้งแห้ง น้ำเชื่อมข้าวโพด ของแข็ง แลคโทส เดกซ์โทรสปราศจากน้ำ มาลิทอล ไซลิทอล แลคทิทอล แมนนิทอล พอลิ- เดกซ์โทรส แอซีซัลเฟม เค ซูคราโลส แอสพาร์เทม หรือการรวมกันของมัน และที่เพิ่มขึ้น ซึ่ง. ไขมันปรากฏอยู่ในปริมาณระหว่างประมาณ 15 และ 38% โดยน้ำหนัก สารสร้างอิมัลชันปรากฏอยู่ ในปริมาณประมาณ 0.05 ถึง 0.65% โดยน้ำหนัก และสารให้ความหวานปรากฏอยู๋ในปริมาณ ประมาณ 25 ถึง 60% โดยน้ำหนัก 5.เปลือกที่มีไขมันเป็นสารพื้นที่รับประทานได้ของข้อถือสิทธิข้อ 1 ซึ่งเปลือกมีรูปร่าง ของกรวยและขอบบนสุดที่อยู่ในแนวระดับอย่างจำเป็นหรือที่อย่างที่เลือกได้ไม่สม่ำเสมอหรือถูกทำ เป็นรอยหยัก 6.เปลือกที่มีไขมันเป็นสารพื้นที่รับประทานได้ของข้อถือสิทธิข้อ 1 ซึ่งเปลือกมีขอบบน สุดถูกทำให้เอียงหรือเอียงสองเท่า 7.เปลือกที่มีไขมันเป็นสารพื้นที่รับประทานได้ของข้อถือสิทธิข้อ 1 ซึ่งเปลือกรวมถึงสิ่งที่ รวมเข้ามาบนพื้นผิวด้านใน ด้วยสิ่งที่รวมเข้ามาซึ่งประกอบด้วย นัท เศษเล็กเศษน้อยของคุ้กกี้ ธัญพืช ชิ้นผลไม้ ชิ้นบางของช็อคโกแลต ชิ้นขนมหวานหรือมะพร้าว 8.เปลือกที่มีไขมันเป็นสารพื้นที่รับประทานได้ของข้อถือสิทธิข้อ 1 ซึ่งประกอบรวมเพิ่ม ขึ้นด้วยเค้กหรือกรวยเวเฟอร์ถูกฝังภายในวัสดุที่มีไขมันเป็นสารพื้นของเปลือก 9.เปลือกที่มีไขมันเป็นสารพื้นที่รับประทานได้ของข้อถือสิทธิข้อ 1 ซึ่งปลายเปิดของส่วน รองรับบรรจุภัณฑ์และเปลือกถูกจุ่มลงในแหล่งจ่ายของวัสดุของเหลวที่มีไขมันเป็นสารพื้นเพื่อเตรียม ให้มีการเคลือบบนขอบบนสุดของส่วนรองรับและเปลือก ซึ่งวัสดุของเหลวที่มีไขมันเป็นสารพื้นคือ ช็อกโกแลตของเหลวหรือคาราเมลของเหลว 1 0.เปลือกที่มีไขมันเป็นสารพื้นที่รับประทานได้ของข้อถือสิทธิข้อ 9 ซึ่งปลายเปิดของ ส่วนรองรับบรรจุภัณฑ์และเปลือกถูกจุ่มลงในแหล่งจ่ายของนัท เศษเหล็กเศษน้อยของคุ้กกี้ ธัญพืช ชิ้นผลไม้ ชิ้นบางของช็อกโกแลต ชิ้นขนมหวานหรือมะพร้าวหลังจากถูกจุ่มลงในวัสดุของเหลวที่มี ไขมันเป็นสารพื้น 12. The edible fat-based shell of claim 1, having walls in the shape of a cup, cone or other open top, and further comprising a filling at least partially contained or completely contained in the shell, wherein the filling is a confectionery or frozen dessert. 3. The edible fat-based shell of claim 2, wherein the frozen dessert comprises ice cream, frozen yogurt, sherbet or water ice, and is present in an amount extending beyond the open top of the backing so as to be prepared as a mass exposed for easy consumption. The mixture optionally comprises an emulsifying agent in an amount not exceeding 1% by weight of the mixture, a sweetener, or both. 4. The edible fat-containing rind of claim 3, wherein the emulsifying agent and the sweetener appear, with the emulsifying agent comprising lecithin, ammonium phosphatide, polyglyceryl, pilyricinoleate, citric acid monoglyceride esters, or combinations thereof, and the sweetener comprising sugar, dry honey, corn syrup solids, lactose, anhydrous dextrose, malitol, xylitol, lactitol, mannitol, poly- dextrose, acesulfame K, sucralose, aspartame, or combinations thereof, and increased, wherein the fat is present in an amount between about 15 and 38% by weight, the emulsifying agent is present. 5. The edible fat-based shell of claim 1, wherein the shell has the shape of a cone and the top edge is necessarily or optionally horizontally irregular or notched. 6. The edible fat-based shell of claim 1, wherein the top edge is beveled or double-beveled. 7. The edible fat-based shell of claim 1, wherein the shell includes an inclusion on the inner surface, with the inclusion comprising nuts, cookie crumbs, cereals, fruit pieces, chocolate chips, candy pieces or coconut. 8. The edible fat-based shell of claim 1, further comprising a cake or wafer cone embedded in the fat-based shell material. 9. The edible fat-based shell of claim 1, wherein the open end of the portion The packaging support and shell are dipped into a supply of a fat-based liquid material to provide a coating on the top edge of the support and shell, wherein the fat-based liquid material is liquid chocolate or liquid caramel 1 0. The fat-based edible shell of claim 9, wherein the open end of the packaging support and shell is dipped into a supply of nuts, cookie crumbs, cereal, fruit pieces, chocolate pieces, candy pieces or coconut after being dipped in the fat-based liquid material 1 0.
1. เปลือกที่มีไขมันเป็นสารพื้นที่รับประทานได้ของข้อถือสิทธิข้อ 1 ซึ่งสร้างเปลือกจาก สารผสมขึ้นรูปเปลือกที่รับประทานได้ที่มีสีแตกต่างกันดังเช่น ผนังของเปลือกประกอบรวมด้วยแถบ ในแนวดิ่งที่มีสีแตกต่างกัน 11. The edible shell of claim 1, wherein the shell is formed from a mixture forming an edible shell of different colors, such that the shell wall comprises vertical stripes of different colors 1.
2. เปลือกที่มีไขมันเป็นสารพื้นที่รับประทานของข้อถือสิทธิข้อ 1 ซึ่งสร้างเส้น แบบ อย่าง หรือจุดสำหรับตกแต่งบนผนังของเปลือก 1 3. เปลือกที่มีไขมันเป็นสารพื้นที่รับประทานได้ของข้อถือสิทธิข้อ 1 ซึ่งประกอบรวมเพิ่ม ขึ้นด้วยชั้นสองชั้นหรือมากกว่าของผนังถูกสร้างจากสารผสมขึ้นรูปเปลือกที่รับประทานได้สองชนิด หรือมากกว่า 1 4. เปลือกที่มีไขมันเป็นสารพื้นที่รับประทานได้ของข้อถือสิทธิข้อ 1 ซึ่งส่วนรองรับบรรจุ ภัณฑ์คือวัสดุชั้นคุณภาพสำหรับอาหารซึ่งไม่ดูดซึมซึ่งประกอบรวมด้วยกระดาษ ฟอยด์ พลาสติก โปร่งใส โปร่งแสงหรือไม่โปร่งใสหรือผลิตภัณฑ์แผ่นประกบของมัน 1 5. วิธีสำหรับการผลิตเปลือกที่มีไขมันเป็นสารพื้นที่รับประทานได้ ซึ่งประกอบรวมด้วย การเตรียมส่วนรองรับบรรจุภัณฑ์ในรูปร่างตามต้องการที่ระบุปริมาตรภายในนั้น : และ โปรยหรือรินโดยตรงของปริมาณของสารผสมขึ้นรูปเปลือกที่รับประทานได้บนส่วนรองรับ บรรจุภัณฑ์ ซึ่งสารผสมกลายเป็นของแข็งเพื่อทำให้เกิดเปลือกที่มีความหนากลมกลืนบนนั้นด้วย สารผสมซึ่งประกอบรวมด้วยไขมันหนึ่งชนิดหรือมากกว่า และมีความหนืดพลาสติคประมาณ 10 ถึง 40 ปัวส์ และค่าคลากประมาณ 50 ถึง 250 ดายน์/ซม2 ระหว่างการโปรยหรือริน 1 6.วิธีของข้อถือสิทธิข้อ 15 ซึ่งสร้างเปลือกจากปริมาณของสารผสมขึ้นรูปเปลือกที่สมมูล กับสิ่งที่ต้องการสำหรับการสร้างเปลือก 1 7.วิธีของข้อถือสิทธิข้อ 15 ซึ่งเปลือกมีรูปร่างของถ้วย กรวย หรือที่รองรับบนสุดเปิด อย่างอื่นและซึ่งประกอบรวมเพิ่มขึ้นด้วยการเตรียมให้มีสิ่งบรรจุที่อย่างน้อยที่สุดถูกสงวนไว้เป็นบาง ส่วนหรือบรรจุอย่างสมบูรณ์ในเปลือก 1 8. วิธีของข้อถือสิทธิข้อ 17 ซึ่งสิ่งบรรจุคือขนมหวานหรือขนมหวานที่มีความเย็น 1 9. วิธีของข้อถือสิทธิข้อ 17 ซึ่งสิ่งบรรจุคือขนมหวานที่มีความเย็นซึ่งประกอบรวมด้วย ไอศกรีม โยเกิร์ตแช่แข็ง เซอร์เบทหรือวอเทอร์ ไอซ์ และปรากฏอยู่ในปริมาณที่ขยายพ้นส่วนบน สุดที่เปิดของเปลือกเพื่อที่ถูกเตรียมให้มีมวลที่ถูกเผยออกสำหรับการบริโภคที่ง่าย 2 0. วิธีของข้อถือสิทธิข้อ 15 ซึ่งสารผสมประกอบรวมเพิ่มขึ้นด้วยสารสร้างอิมัลชันใน ปริมาณที่ไม่มากกว่า 1% โดยน้ำหนักของสารผสมและสารให้ความหวาน ด้วยสารสร้างอิมัลชันซึ่ง ประกอบรวมด้วยเลซิธิน, แอมโมเนียม ฟอสฟาไทด์. พอลิกลีเซอริล พิลิริซิโนลีเอท, เอสเทอร์ของ กรดซิทริคของโมโนกลีเซอไรด์ หรือการรวมกันของมันและสารให้ความหวานซึ่งประกอบรวมด้วย น้ำตาล น้ำผึ้งแห้ง น้ำเชื่อมข้าวโพดของแข็ง แลคโทส เดกซ์โทรสปราศจากน้ำ มาลิทอล ไซลิทอล แลคทิทอล แมนนิทอล พอลิเดกซ์โทรส แอซีซัลเฟม เค ซูคราโลส แอสพาร์เทม หรือการรวม กันของมัน 2 1.วิธีของข้อถือสิทธิข้อ 15 ซึ่งส่วนรองรับบรรจุภัณฑ์และเปลือกแต่ละอย่างถูกสร้างเป็น กรวย 2 2.วิธีของข้อถือสิทธิข้อ 21 ซึ่งสร้างเปลือกที่มีขอบบนสุดไม่สม่ำเสมอ 2 3.วิธีของข้อถือสิทธิข้อ 22 ซึ่งสร้างเปลือกที่มีขอบบนสุดแตกแยกออกหรือมีรอยหยักและ ทำเป็นมุม 2 4.วิธีของข้อถือสิทธิข้อ 15 ซึ่งประกอบรวมเพิ่มขึ้นด้วยการเตรียมให้มีสิ่งที่รวมเข้ามาบน พื้นผิวด้านในของเปลือก ด้วยสิ่งที่รวมเข้ามาซึ่งประกอบด้วยนัท เศษเล็กเศษน้อยของคุ้กกี้ ธัญพืช ชิ้นผลไม้ ชิ้นบางของช็อคโกแลต ชิ้นขนมหวานหรือมะพร้าว 2 5. วิธีของข้อถือสิทธิข้อ 15 ซึ่งส่วนรองรับบรรจุภัณฑ์คือวัสดุชั้นคุณภาพสำหรับอาหารซึ่ง ไม่ดูดซึมซึ่งประกอบรวมด้วยกระดาษ ฟอยล์ พลาสติคโปร่งใส โปร่งแสงหรือไม่โปร่งใสหรือ ผลิตภัณฑ์แผ่นประกอบของมัน 2 6. วิธีของข้อถือสิทธิข้อ 15 ซึ่งโปรยสารผสมจากกระแสจำนวนหนึ่งลงบนส่วนรองรับ บรรจุภัณฑ์ 2 7.วิธีของข้อถือสิทธิข้อ 26 ซึ่งจัดวางกระแสจำนวนหนึ่งเพื่อจัดให้มีขอบบนสุดที่ สม่ำเสมอของเปลือกซึ่งอยู่ในแนวระดับอย่างจำเป็นหรือถูกทำเป็นรอยหยักอย่างสม่ำเสมออย่างจำ เป็น 2 8. วิธีของข้อถือสิทธิข้อ 26 ซึ่งจัดวางกระแสจำนวนหนึ่งอย่างสม่ำเสมอประมาณเส้นกึ่ง กลางในแนวดิ่งจินตภาพของเปลือก 2 9. วิธีของข้อถือสิทธิข้อ 26 ซึ่งอย่างน้อยที่สุดส่วนหนึ่งของกระแสจำนวนหนึ่งวางนอก เส้นกลางจากเส้นกึ่งกลางในแนวดิ่งจินตภาพของเปลือกดังนั้นเตรียมให้มีขอบบนสุดที่สม่ำเสมอ ของเปลือกซึ่งถูกทำให้เป็นมุม เอียง หรือเอียงสองเท่า 3 0.วิธีของข้อถือสิทธิข้อ 15 ซึ่งประกอบรวมเพื่อขึ้นด้วยการฝังเค้กหรือกรวยเวเฟอร์ภายใน เปลือกระหว่างการโปรย 3 1.วิธีของข้อถือสิทธิข้อ 15 ซึ่งฉีดพ่นสารผสมขึ้นรูปเปลือกลงบนส่วนรองรับบรรจุภัณฑ์ ขณะที่ยึดส่วนรองรับในตำแหน่งเปิดลงไปทางด้านล่าง 3 2.วิธีของข้อถือสิทธิข้อ 31 ซึ่งประกอบรวมเพิ่มขึ้นด้วยการจุ่มปลายเปิดของส่วนรองรับ บรรจุภัณฑ์และเปลือกเข้ามาในแหล่งจ่ายของวัสดุของเหลวที่มีไขมันเป็นสารพื้นเพื่อเตรียมให้มีการ เคลือบบนขอบบนสุดของส่วนรองรับและเปลือก ซึ่งวัสดุของเหลวที่มีไขมันเป็นสารพื้นคือช็อค- โกแลตของหวานหรือคาราเมลของเหลว 3 3.วิธีของข้อถือสิทธิข้อ 32 ซึ่งประกอบรวมเพิ่มขึ้นด้วยการจุ่มปลายเปิดของส่วนรองรับ บรรจุภัณฑ์และเปลือกเขามาในแหล่งจ่ายของนัท เศษเหล็กเศษน้อยของคุ้กกี้ ธัญพืช ชิ้นผลไม้ ชิ้น บางของช็อคโกแลต ชิ้นขนมหวานหรือมะพร้าวหลังจากการจุ่มเข้ามาในวัสดุของเหลวที่มีไขมัน เป็นสารพื้น 3 4.วิธีของข้อถือสิทธิข้อ 15 ซึ่งประกอบรวมเพิ่มขึ้นด้วยการโปรยสารผสมขึ้นรูปเปลือกที่ รับประทานได้ที่มีสีแตกต่างกันเพื่อสร้างเปลือกที่มีแถบในแนวดิ่งที่มีสีแตกต่างกัน 3 5.วิธีของข้อถือสิทธิข้อ 15 ซึ่งประกอบรวมเพิ่มขึ้นด้วยการสร้างเส้น แบบอย่างหรือจุด สำหรับตกแต่งบนพื้นผิวด้านนอกของเปลือก 3 6.เครื่องสำเร็จสำหรับผลิตเปลือกที่มีไขมันเป็นสารพื้นที่รับประทานได้ ซึ่งประกอบรวม ด้วย : ส่วนรองรับบรรรจุภัณฑ์ในรูปร่างตามต้องการที่ระบุปริมาตรภายในนั้น : ท่อซึ่งมีรูจำนวนมากสำหรับโปรยสารผสมขึ้นรูปเลือกที่รับประทานได้ลงบนส่วนรอง รับบรรจุภัณฑ์ซึ่งสารผสมกลายเป็นของแข็งเพื่อสร้างเปลือกด้วยสารผสมซึ่งประกอบรวมด้วยไขมัน หนึ่งชนิดหรือมากกว่า ซึ่งสารผสมมีความหนืดพลาสติคประมาณ 10 ถึง 40 ปัวส์ และค่าคลาก ประมาณ 50 ถึง 250 ดายน์/ซม2 ระหว่างการโปรย ; และ อุปกรณ์กำหนดตำแหน่งสำหรับจัดวางท่อและส่วนรองรับบรรจุภัณฑ์ในตำแหน่งดำเนิน การสำหรับการโปรยอย่างถูกต้องของสารผสมลงบนที่รองรับบรรจุภัณฑ์ 3 7.เครื่องสำเร็จของข้อถือสิทธิข้อ 36 ซึ่งท่อถูกดำเนินการเพื่อแจกจ่ายปริมาณของสาร ผสมขึ้นรูปเปลือกที่สมมูลกับสิ่งที่ต้องการสำหรับการสร้างเปลือก 3 8.เครื่องสำเร็จของข้อถือสิทธิข้อ 36 ซึ่งส่วนรองรับบรรจุภัณฑ์มีรูปร่างของถ้วย กรวย หรือที่รองรับบนสุดเปิดอย่างอื่นและเปลือกเป็นไปตามรูปร่างของส่วนรองรับ 3 9.เครื่องสำเร็จของข้อถือสิทธิข้อ 36 ซึ่งวางรูในท่อเพื่อเตรียมให้มีกระแสที่ถูกทำเป็นมุมที่ น้อยกว่า 90 องศาเทียบกับปลอกบรรจุภัณฑ์ 4 0.เครื่องสำเร็จของข้อถือสิทธิข้อ 36 ซึ่งรูในท่อถูกทำเป็นมุมโดยประมาณ 20 ถึง 35 องศา 4 1.เครื่องสำเร็จของข้อถือสิทธิข้อ 36 ซึ่งประกอบรวมเพิ่มขึ้นด้วยชุดประกอบการยึดท่อ เพื่อปรับแนวแก่ท่อด้วยเส้นกึ่งกลางในแนวดิ่งจินตภาพของเปลือกเพื่อมุ่งนำกระแสจำนวนหนึ่งใน การจัดวางที่สม่ำเสมอลงบนเปลือกและเตรียมให้มีขอบบนสุดของเปลือกที่สม่ำเสมอ 4 2.เครื่องสำเร็จของข้อถือสิทธิข้อ 36 ซึ่งประกอบรวมเพิ่มขึ้นด้วยชุดประกอบการยึดท่อ เพื่อปรับแนวแก่ท่อในตำแหน่งวางนอกเส้นกลางจากเส้นกึ่งกลางในแนวดิ่งจินตภาพของเปลือกเพื่อ มุ่งนำกระแสจำนวนหนึ่งในการจัดวางที่ไม่สม่ำเสมอลงบนเปลือกและเตรียมให้มีขอบบนสุดที่ไม่ สม่ำเสมอของเปลือกซึ่งเป็นมุม เอียง หรือเอียงสองเท่า 4 2. The edible fat-based shell of claim 1, which forms decorative lines, patterns, or dots on the wall of the shell 1 3. The edible fat-based shell of claim 1, further comprising two or more layers of the wall formed by two or more edible shell-forming compounds 1 4. The edible fat-based shell of claim 1, wherein the packaging backing is a non-absorbent food-grade material comprising paper, foil, transparent, translucent or non-transparent plastic or sheet products thereof 1 5. A method for producing the edible fat-based shell, comprising preparing a packaging backing of a desired shape with specified internal volume: and sprinkling or pouring directly a quantity of the edible shell-forming compound on the packaging backing, wherein the mixture becomes solid to form a uniform thick shell on top of the mixture comprising one or more fats. and having a plastic viscosity of about 10 to 40 Pois and a Clark value of about 50 to 250 dyne/cm2 during pouring or pouring 1 6. The method of claim 15, wherein the shell is formed from an amount of the shell-forming mixture equivalent to that required for forming the shell 1 7. The method of claim 15, wherein the shell has the shape of a cup, cone, or other open top receptacle, and further comprising arrangements so that a filling is at least partially or completely contained in the shell 1 8. The method of claim 17, wherein the filling is a frozen dessert or confectionery 1 9. The method of claim 17, wherein the filling is a frozen dessert comprising ice cream, frozen yogurt, sorbet or water ice, and is present in an amount extending beyond the open top of the shell so as to be prepared to have a mass that is exposed for easy consumption 2 0. The method of claim 15, wherein the mixture further comprising an emulsifying agent in Not more than 1% by weight of the mixture and sweetener with emulsifier comprising lecithin, ammonium phosphatide, polyglyceryl pyricinoleate, citric acid esters of monoglycerides. Or a combination thereof, and a sweetener comprising sugar, dry honey, corn syrup solids, lactose, anhydrous dextrose, malitol, xylitol, lactitol, mannitol, polydextrose, acesulfame K, sucralose, aspartame, or a combination thereof. 1. The method of claim 15, wherein the packaging backing and the shell are each formed into a cone. 2. The method of claim 21, which forms a shell having an irregular top edge. 2. The method of claim 22, which forms a shell having a split or notched top edge and an angle. 2. The method of claim 15, further comprising providing an inclusion on the inner surface of the shell, with the inclusion comprising nuts, cookie crumbs, cereals, fruit pieces, chocolate chips, candy pieces or coconut. 2. The method of claim 15, wherein the packaging backing is a food-grade material, which Non-absorbent, comprising paper, foil, transparent, translucent or non-transparent plastic, or sheet products thereof. 2 6. The method of claim 15, in which a plurality of streams is sprayed onto a packaging carrier. 2 7. The method of claim 26, in which the plurality of streams are arranged so as to provide a uniform top edge of the shell which is necessarily horizontal or necessarily uniformly notched. 2 8. The method of claim 26, in which the plurality of streams is sprayed uniformly about an imaginary vertical centerline of the shell. 2 9. The method of claim 26, in which at least a portion of the plurality of streams is placed outside the centerline from the imaginary vertical centerline of the shell so as to provide a uniform top edge of the shell which is angled, beveled or double beveled. 3 0. The method of claim 15, comprising embedding a cake or wafer cone within the shell during spraying. 3 1. The method of claim 15, in which the plurality of streams is sprayed onto a packaging carrier. While holding the carrier in the open position downward 3. 2. The method of claim 31, further comprising dipping the open end of the carrier, package and shell into a supply of a fat-based liquid material to provide a coating on the top edge of the carrier and shell, wherein the fat-based liquid material is chocolate, dessert or caramel liquid 3. 3. The method of claim 32, further comprising dipping the open end of the carrier, package and shell into a supply of nuts, cookie scraps, cereals, fruit pieces, chocolate pieces, candy pieces or coconut after dipping into the fat-based liquid material 3. 4. The method of claim 15, further comprising sprinkling the forming mixture of different colored edible shells to form a shell having vertical stripes of different colors 3. 5. The method of claim 15, further comprising creating lines, patterns or dots for decoration on the outer surface of the shell 3. 6. An apparatus for producing a shell having fat as the edible surface. 7. The apparatus of claim 36, wherein the apparatus is operated to dispense a quantity of the edible formulation mixture onto the apparatus, wherein the apparatus is solidified to form a shell of the apparatus comprising one or more fats, wherein the apparatus has a plastic viscosity of about 10 to 40 Pois and a Clark value of about 50 to 250 dyne/cm2 during dispensing; and a positioning device for positioning the apparatus and the apparatus for properly dispensing the apparatus onto the apparatus. 8. The finished product of claim 36, wherein the packaging carrier has the shape of a cup, cone, or other open top carrier and the shell conforms to the shape of the carrier 3. 9. The finished product of claim 36, in which holes are placed in the tube to provide a stream that is made at an angle of less than 90 degrees with respect to the packaging casing 4. 0. The finished product of claim 36, in which the holes in the tube are made at an angle of approximately 20 to 35 degrees 4 1. The apparatus of claim 36 further comprising a pipe-holding assembly for aligning the pipe with an imaginary vertical centerline of the shell to direct a plurality of currents in a uniform arrangement onto the shell and providing a uniform top edge of the shell 4. 2. The apparatus of claim 36 further comprising a pipe-holding assembly for aligning the pipe with an imaginary vertical centerline of the shell to direct a plurality of currents in a non-uniform arrangement onto the shell and providing a non-uniform top edge of the shell which is at an angle, bevel or double bevel 4.
3. เครื่องสำเร็จของข้อถือสิทธิข้อ 36 ซึ่งประกอบรวมเพิ่มขึ้นด้วยเครื่องมือสำหรับยึดส่วน รองรับบรรจุภัณฑ์ในตำแหน่งเปิดลงไปทางด้านล่างขณะที่ฉีดพ่นสารผสมขึ้นรูปเปลือกเข้ามาในส่วน รองรับบรรรจุภัณฑ์ 43. The finished apparatus of claim 36, further comprising a means for holding the packaging carrier in the open position downward while the shell forming compound is injected into the packaging carrier 4.
4. เครื่องสำเร็จของข้อถือสิทธิข้อ 36 ซึ่งประกอบรวมเพิ่มขึ้นด้วยแหล่งสะสมสำหรับยึด เครื่องแจกจ่ายวัสดุของเหลวที่มีไขมันเป็นสารพื้นและเครื่องมือสำหรับจุ่มปลายเปิดของส่วนรองรับ บรรจุภัณฑ์และเปลือกเข้ามาในวัสดุของเหลวที่มีไขมันเป็นสารพื้นเพื่อเตรียมให้มีการเคลือบบนขอบ บนสุดของส่วนรองรับและเปลือก 44. The apparatus of claim 36, further comprising a holding reservoir, a dispensing device for the grease-based liquid material, and a means for dipping the open end of the carrier, container, and shell into the grease-based liquid material to prepare a coating on the top edge of the carrier and shell 4.
5. เครื่องสำเร็จของข้อถือสิทธิข้อ 36 ซึ่งท่อประกอบรวมด้วยเครื่องมือโพรงภายในดังเช่น ท่อแจกจ่ายสารผสมขึ้นรูปเปลือกที่รับประทานได้สองชนิดหรือมากกว่าอย่างพร้อมกัน5. The finished apparatus of claim 36, wherein the tube comprises a cavity device, such as a tube for simultaneously dispensing two or more edible shell-forming mixtures.