cros-codecs 0.0.6

// Copyright 2024 The ChromiumOS Authors
// Use of this source code is governed by a BSD-style license that can be
// found in the LICENSE file.

use std::borrow::Cow;
use std::fmt;
use std::io::Cursor;
use std::io::Read;
use std::io::Seek;
use std::io::SeekFrom;
use std::io::Write;
use std::marker::PhantomData;

use crate::codec::h264::parser::Nalu as H264Nalu;
use crate::codec::h265::parser::Nalu as H265Nalu;

/// A bit reader for codec bitstreams. It properly handles emulation-prevention
/// bytes and stop bits for H264.
#[derive(Clone)]
pub(crate) struct BitReader<'a> {
    /// A reference into the next unread byte in the stream.
    data: Cursor<&'a [u8]>,
    /// Contents of the current byte. First unread bit starting at position 8 -
    /// num_remaining_bits_in_curr_bytes.
    curr_byte: u8,
    /// Number of bits remaining in `curr_byte`
    num_remaining_bits_in_curr_byte: usize,
    /// Used in emulation prevention byte detection.
    prev_two_bytes: u16,
    /// Number of emulation prevention bytes (i.e. 0x000003) we found.
    num_epb: usize,
    /// Whether or not we need emulation prevention logic.
    needs_epb: bool,
    /// How many bits have been read so far.
    position: u64,
}

#[derive(Debug)]
pub(crate) enum GetByteError {
    OutOfBits,
}

impl fmt::Display for GetByteError {
    fn fmt(&self, f: &mut fmt::Formatter) -> fmt::Result {
        write!(f, "reader ran out of bits")
    }
}

#[derive(Debug)]
pub(crate) enum ReadBitsError {
    TooManyBitsRequested(usize),
    GetByte(GetByteError),
    ConversionFailed,
}

impl fmt::Display for ReadBitsError {
    fn fmt(&self, f: &mut fmt::Formatter) -> fmt::Result {
        match self {
            ReadBitsError::TooManyBitsRequested(bits) => {
                write!(f, "more than 31 ({}) bits were requested", bits)
            }
            ReadBitsError::GetByte(_) => write!(f, "failed to advance the current byte"),
            ReadBitsError::ConversionFailed => {
                write!(f, "failed to convert read input to target type")
            }
        }
    }
}

impl From<GetByteError> for ReadBitsError {
    fn from(err: GetByteError) -> Self {
        ReadBitsError::GetByte(err)
    }
}

impl<'a> BitReader<'a> {
    pub fn new(data: &'a [u8], needs_epb: bool) -> Self {
        Self {
            data: Cursor::new(data),
            curr_byte: Default::default(),
            num_remaining_bits_in_curr_byte: Default::default(),
            prev_two_bytes: 0xffff,
            num_epb: Default::default(),
            needs_epb: needs_epb,
            position: 0,
        }
    }

    /// Read a single bit from the stream.
    pub fn read_bit(&mut self) -> Result<bool, String> {
        let bit = self.read_bits::<u32>(1)?;
        match bit {
            1 => Ok(true),
            0 => Ok(false),
            _ => panic!("Unexpected value {}", bit),
        }
    }

    /// Read up to 31 bits from the stream. Note that we don't want to read 32
    /// bits even though we're returning a u32 because that would break the
    /// read_bits_signed() function. 31 bits should be overkill for compressed
    /// header parsing anyway.
    pub fn read_bits<U: TryFrom<u32>>(&mut self, num_bits: usize) -> Result<U, String> {
        if num_bits > 31 {
            return Err(ReadBitsError::TooManyBitsRequested(num_bits).to_string());
        }

        let mut bits_left = num_bits;
        let mut out = 0u32;

        while self.num_remaining_bits_in_curr_byte < bits_left {
            out |= (self.curr_byte as u32) << (bits_left - self.num_remaining_bits_in_curr_byte);
            bits_left -= self.num_remaining_bits_in_curr_byte;
            self.move_to_next_byte().map_err(|err| err.to_string())?;
        }

        out |= (self.curr_byte >> (self.num_remaining_bits_in_curr_byte - bits_left)) as u32;
        out &= (1 << num_bits) - 1;
        self.num_remaining_bits_in_curr_byte -= bits_left;
        self.position += num_bits as u64;

        U::try_from(out).map_err(|_| ReadBitsError::ConversionFailed.to_string())
    }

    /// Reads a two's complement signed integer of length |num_bits|.
    pub fn read_bits_signed<U: TryFrom<i32>>(&mut self, num_bits: usize) -> Result<U, String> {
        let mut out: i32 = self
            .read_bits::<u32>(num_bits)?
            .try_into()
            .map_err(|_| ReadBitsError::ConversionFailed.to_string())?;
        if out >> (num_bits - 1) != 0 {
            out |= -1i32 ^ ((1 << num_bits) - 1);
        }

        U::try_from(out).map_err(|_| ReadBitsError::ConversionFailed.to_string())
    }

    /// Reads an unsigned integer from the stream and checks if the stream is byte aligned.
    pub fn read_bits_aligned<U: TryFrom<u32>>(&mut self, num_bits: usize) -> Result<U, String> {
        if self.num_remaining_bits_in_curr_byte % 8 != 0 {
            return Err("Attempted unaligned read_le()".into());
        }

        Ok(self.read_bits(num_bits).map_err(|err| err.to_string())?)
    }

    /// Skip `num_bits` bits from the stream.
    pub fn skip_bits(&mut self, mut num_bits: usize) -> Result<(), String> {
        while num_bits > 0 {
            let n = std::cmp::min(num_bits, 31);
            self.read_bits::<u32>(n)?;
            num_bits -= n;
        }

        Ok(())
    }

    /// Returns the amount of bits left in the stream
    pub fn num_bits_left(&mut self) -> usize {
        let cur_pos = self.data.position();
        // This should always be safe to unwrap.
        let end_pos = self.data.seek(SeekFrom::End(0)).unwrap();
        let _ = self.data.seek(SeekFrom::Start(cur_pos));
        ((end_pos - cur_pos) as usize) * 8 + self.num_remaining_bits_in_curr_byte
    }

    /// Returns the number of emulation-prevention bytes read so far.
    pub fn num_epb(&self) -> usize {
        self.num_epb
    }

    /// Whether the stream still has RBSP data. Implements more_rbsp_data(). See
    /// the spec for more details.
    pub fn has_more_rsbp_data(&mut self) -> bool {
        if self.num_remaining_bits_in_curr_byte == 0 && self.move_to_next_byte().is_err() {
            // no more data at all in the rbsp
            return false;
        }

        // If the next bit is the stop bit, then we should only see unset bits
        // until the end of the data.
        if (self.curr_byte & ((1 << (self.num_remaining_bits_in_curr_byte - 1)) - 1)) != 0 {
            return true;
        }

        let mut buf = [0u8; 1];
        let orig_pos = self.data.position();
        while let Ok(_) = self.data.read_exact(&mut buf) {
            if buf[0] != 0 {
                self.data.set_position(orig_pos);
                return true;
            }
        }
        false
    }

    /// Reads an Unsigned Exponential golomb coding number from the next bytes in the
    /// bitstream. This may advance the state of position within the bitstream even if the
    /// read operation is unsuccessful. See H264 Annex B specification 9.1 for details.
    pub fn read_ue<U: TryFrom<u32>>(&mut self) -> Result<U, String> {
        let mut num_bits = 0;

        while self.read_bits::<u32>(1)? == 0 {
            num_bits += 1;
            if num_bits > 31 {
                return Err("invalid stream".into());
            }
        }

        let value = ((1u32 << num_bits) - 1)
            .checked_add(self.read_bits::<u32>(num_bits)?)
            .ok_or::<String>("read number cannot fit in 32 bits".into())?;

        U::try_from(value).map_err(|_| "conversion error".into())
    }

    pub fn read_ue_bounded<U: TryFrom<u32>>(&mut self, min: u32, max: u32) -> Result<U, String> {
        let ue = self.read_ue()?;
        if ue > max || ue < min {
            Err(format!("Value out of bounds: expected {} - {}, got {}", min, max, ue))
        } else {
            Ok(U::try_from(ue).map_err(|_| String::from("Conversion error"))?)
        }
    }

    pub fn read_ue_max<U: TryFrom<u32>>(&mut self, max: u32) -> Result<U, String> {
        self.read_ue_bounded(0, max)
    }

    /// Reads a signed exponential golomb coding number. Instead of using two's
    /// complement, this scheme maps even integers to positive numbers and odd
    /// integers to negative numbers. The least significant bit indicates the
    /// sign. See H264 Annex B specification 9.1.1 for details.
    pub fn read_se<U: TryFrom<i32>>(&mut self) -> Result<U, String> {
        let ue = self.read_ue::<u32>()? as i32;

        if ue % 2 == 0 {
            Ok(U::try_from(-(ue / 2)).map_err(|_| String::from("Conversion error"))?)
        } else {
            Ok(U::try_from(ue / 2 + 1).map_err(|_| String::from("Conversion error"))?)
        }
    }

    pub fn read_se_bounded<U: TryFrom<i32>>(&mut self, min: i32, max: i32) -> Result<U, String> {
        let se = self.read_se()?;
        if se < min || se > max {
            Err(format!("Value out of bounds, expected between {}-{}, got {}", min, max, se))
        } else {
            Ok(U::try_from(se).map_err(|_| String::from("Conversion error"))?)
        }
    }

    /// Read little endian multi-byte integer.
    pub fn read_le<U: TryFrom<u32>>(&mut self, num_bits: u8) -> Result<U, String> {
        let mut t = 0;

        for i in 0..num_bits {
            let byte = self.read_bits_aligned::<u32>(8)?;
            t += byte << (i * 8)
        }

        Ok(U::try_from(t).map_err(|_| String::from("Conversion error"))?)
    }

    /// Return the position of this bitstream in bits.
    pub fn position(&self) -> u64 {
        self.position
    }

    fn get_byte(&mut self) -> Result<u8, GetByteError> {
        let mut buf = [0u8; 1];
        self.data.read_exact(&mut buf).map_err(|_| GetByteError::OutOfBits)?;
        Ok(buf[0])
    }

    fn move_to_next_byte(&mut self) -> Result<(), GetByteError> {
        let mut byte = self.get_byte()?;

        if self.needs_epb {
            if self.prev_two_bytes == 0 && byte == 0x03 {
                // We found an epb
                self.num_epb += 1;
                // Read another byte
                byte = self.get_byte()?;
                // We need another 3 bytes before another epb can happen.
                self.prev_two_bytes = 0xffff;
            }
            self.prev_two_bytes = (self.prev_two_bytes << 8) | u16::from(byte);
        }

        self.num_remaining_bits_in_curr_byte = 8;
        self.curr_byte = byte;
        Ok(())
    }
}

/// Iterator over IVF packets.
pub struct IvfIterator<'a> {
    cursor: Cursor<&'a [u8]>,
}

impl<'a> IvfIterator<'a> {
    pub fn new(data: &'a [u8]) -> Self {
        let mut cursor = Cursor::new(data);

        // Skip the IVH header entirely.
        cursor.seek(std::io::SeekFrom::Start(32)).unwrap();

        Self { cursor }
    }
}

impl<'a> Iterator for IvfIterator<'a> {
    type Item = &'a [u8];

    fn next(&mut self) -> Option<Self::Item> {
        // Make sure we have a header.
        let mut len_buf = [0u8; 4];
        self.cursor.read_exact(&mut len_buf).ok()?;
        let len = ((len_buf[3] as usize) << 24)
            | ((len_buf[2] as usize) << 16)
            | ((len_buf[1] as usize) << 8)
            | (len_buf[0] as usize);

        // Skip PTS.
        self.cursor.seek(std::io::SeekFrom::Current(8)).ok()?;

        let start = self.cursor.position() as usize;
        let _ = self.cursor.seek(std::io::SeekFrom::Current(len as i64)).ok()?;
        let end = self.cursor.position() as usize;

        Some(&self.cursor.get_ref()[start..end])
    }
}

/// Helper struct for synthesizing IVF file header
pub struct IvfFileHeader {
    pub magic: [u8; 4],
    pub version: u16,
    pub header_size: u16,
    pub codec: [u8; 4],
    pub width: u16,
    pub height: u16,
    pub framerate: u32,
    pub timescale: u32,
    pub frame_count: u32,
    pub unused: u32,
}

impl Default for IvfFileHeader {
    fn default() -> Self {
        Self {
            magic: Self::MAGIC,
            version: 0,
            header_size: 32,
            codec: Self::CODEC_VP9,
            width: 320,
            height: 240,
            framerate: 1,
            timescale: 1000,
            frame_count: 1,
            unused: Default::default(),
        }
    }
}

impl IvfFileHeader {
    pub const MAGIC: [u8; 4] = *b"DKIF";
    pub const CODEC_VP8: [u8; 4] = *b"VP80";
    pub const CODEC_VP9: [u8; 4] = *b"VP90";
    pub const CODEC_AV1: [u8; 4] = *b"AV01";

    pub fn new(codec: [u8; 4], width: u16, height: u16, framerate: u32, frame_count: u32) -> Self {
        let default = Self::default();

        Self {
            codec,
            width,
            height,
            framerate: framerate * default.timescale,
            frame_count,
            ..default
        }
    }
}

impl IvfFileHeader {
    /// Writes header into writer
    pub fn writo_into(&self, writer: &mut impl std::io::Write) -> std::io::Result<()> {
        writer.write_all(&self.magic)?;
        writer.write_all(&self.version.to_le_bytes())?;
        writer.write_all(&self.header_size.to_le_bytes())?;
        writer.write_all(&self.codec)?;
        writer.write_all(&self.width.to_le_bytes())?;
        writer.write_all(&self.height.to_le_bytes())?;
        writer.write_all(&self.framerate.to_le_bytes())?;
        writer.write_all(&self.timescale.to_le_bytes())?;
        writer.write_all(&self.frame_count.to_le_bytes())?;
        writer.write_all(&self.unused.to_le_bytes())?;

        Ok(())
    }
}

/// Helper struct for synthesizing IVF frame header
pub struct IvfFrameHeader {
    pub frame_size: u32,
    pub timestamp: u64,
}

impl IvfFrameHeader {
    /// Writes header into writer
    pub fn writo_into(&self, writer: &mut impl std::io::Write) -> std::io::Result<()> {
        writer.write_all(&self.frame_size.to_le_bytes())?;
        writer.write_all(&self.timestamp.to_le_bytes())?;
        Ok(())
    }
}

/// Iterator NALUs in a bitstream.
pub struct NalIterator<'a, Nalu>(Cursor<&'a [u8]>, PhantomData<Nalu>);

impl<'a, Nalu> NalIterator<'a, Nalu> {
    pub fn new(stream: &'a [u8]) -> Self {
        Self(Cursor::new(stream), PhantomData)
    }
}

impl<'a> Iterator for NalIterator<'a, H264Nalu<'a>> {
    type Item = Cow<'a, [u8]>;

    fn next(&mut self) -> Option<Self::Item> {
        H264Nalu::next(&mut self.0).map(|n| n.data).ok()
    }
}

impl<'a> Iterator for NalIterator<'a, H265Nalu<'a>> {
    type Item = Cow<'a, [u8]>;

    fn next(&mut self) -> Option<Self::Item> {
        H265Nalu::next(&mut self.0).map(|n| n.data).ok()
    }
}

#[derive(Debug)]
pub enum BitWriterError {
    InvalidBitCount,
    Io(std::io::Error),
}

impl fmt::Display for BitWriterError {
    fn fmt(&self, f: &mut fmt::Formatter) -> fmt::Result {
        match self {
            BitWriterError::InvalidBitCount => write!(f, "invalid bit count"),
            BitWriterError::Io(x) => write!(f, "{}", x.to_string()),
        }
    }
}

impl From<std::io::Error> for BitWriterError {
    fn from(err: std::io::Error) -> Self {
        BitWriterError::Io(err)
    }
}

pub type BitWriterResult<T> = std::result::Result<T, BitWriterError>;

pub struct BitWriter<W: Write> {
    out: W,
    nth_bit: u8,
    curr_byte: u8,
}

impl<W: Write> BitWriter<W> {
    pub fn new(writer: W) -> Self {
        Self { out: writer, curr_byte: 0, nth_bit: 0 }
    }

    /// Writes fixed bit size integer (up to 32 bit)
    pub fn write_f<T: Into<u32>>(&mut self, bits: usize, value: T) -> BitWriterResult<usize> {
        let value = value.into();

        if bits > 32 {
            return Err(BitWriterError::InvalidBitCount);
        }

        let mut written = 0;
        for bit in (0..bits).rev() {
            let bit = (1 << bit) as u32;

            self.write_bit((value & bit) == bit)?;
            written += 1;
        }

        Ok(written)
    }

    /// Takes a single bit that will be outputed to [`std::io::Write`]
    pub fn write_bit(&mut self, bit: bool) -> BitWriterResult<()> {
        self.curr_byte |= (bit as u8) << (7u8 - self.nth_bit);
        self.nth_bit += 1;

        if self.nth_bit == 8 {
            self.out.write_all(&[self.curr_byte])?;
            self.nth_bit = 0;
            self.curr_byte = 0;
        }

        Ok(())
    }

    /// Immediately outputs any cached bits to [`std::io::Write`]
    pub fn flush(&mut self) -> BitWriterResult<()> {
        if self.nth_bit != 0 {
            self.out.write_all(&[self.curr_byte])?;
            self.nth_bit = 0;
            self.curr_byte = 0;
        }

        self.out.flush()?;
        Ok(())
    }

    /// Returns `true` if ['Self`] hold data that wasn't written to [`std::io::Write`]
    pub fn has_data_pending(&self) -> bool {
        self.nth_bit != 0
    }

    pub(crate) fn inner(&self) -> &W {
        &self.out
    }

    pub(crate) fn inner_mut(&mut self) -> &mut W {
        &mut self.out
    }
}

impl<W: Write> Drop for BitWriter<W> {
    fn drop(&mut self) {
        if let Err(e) = self.flush() {
            log::error!("Unable to flush bits {e:?}");
        }
    }
}

#[cfg(test)]
mod tests {
    use super::*;

    #[test]
    fn test_ivf_file_header() {
        let mut hdr = IvfFileHeader {
            version: 0,
            codec: IvfFileHeader::CODEC_VP9,
            width: 256,
            height: 256,
            framerate: 30_000,
            timescale: 1_000,
            frame_count: 1,

            ..Default::default()
        };

        let mut buf = Vec::new();
        hdr.writo_into(&mut buf).unwrap();

        const EXPECTED: [u8; 32] = [
            0x44, 0x4b, 0x49, 0x46, 0x00, 0x00, 0x20, 0x00, 0x56, 0x50, 0x39, 0x30, 0x00, 0x01,
            0x00, 0x01, 0x30, 0x75, 0x00, 0x00, 0xe8, 0x03, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00,
            0x00, 0x00, 0x00, 0x00,
        ];

        assert_eq!(&buf, &EXPECTED);

        hdr.width = 1920;
        hdr.height = 800;
        hdr.framerate = 24;
        hdr.timescale = 1;
        hdr.frame_count = 100;

        buf.clear();
        hdr.writo_into(&mut buf).unwrap();

        const EXPECTED2: [u8; 32] = [
            0x44, 0x4b, 0x49, 0x46, 0x00, 0x00, 0x20, 0x00, 0x56, 0x50, 0x39, 0x30, 0x80, 0x07,
            0x20, 0x03, 0x18, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x64, 0x00, 0x00, 0x00,
            0x00, 0x00, 0x00, 0x00,
        ];

        assert_eq!(&buf, &EXPECTED2);
    }

    #[test]
    fn test_ivf_frame_header() {
        let mut hdr = IvfFrameHeader { frame_size: 199249, timestamp: 0 };

        let mut buf = Vec::new();
        hdr.writo_into(&mut buf).unwrap();

        const EXPECTED: [u8; 12] =
            [0x51, 0x0a, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00];

        assert_eq!(&buf, &EXPECTED);

        hdr.timestamp = 1;
        hdr.frame_size = 52;

        buf.clear();
        hdr.writo_into(&mut buf).unwrap();

        const EXPECTED2: [u8; 12] =
            [0x34, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00];

        assert_eq!(&buf, &EXPECTED2);
    }

    #[test]
    fn test_bitwriter_f1() {
        let mut buf = Vec::<u8>::new();
        {
            let mut writer = BitWriter::new(&mut buf);
            writer.write_f(1, true).unwrap();
            writer.write_f(1, false).unwrap();
            writer.write_f(1, false).unwrap();
            writer.write_f(1, false).unwrap();
            writer.write_f(1, true).unwrap();
            writer.write_f(1, true).unwrap();
            writer.write_f(1, true).unwrap();
            writer.write_f(1, true).unwrap();
        }
        assert_eq!(buf, vec![0b10001111u8]);
    }

    #[test]
    fn test_bitwriter_f3() {
        let mut buf = Vec::<u8>::new();
        {
            let mut writer = BitWriter::new(&mut buf);
            writer.write_f(3, 0b100u8).unwrap();
            writer.write_f(3, 0b101u8).unwrap();
            writer.write_f(3, 0b011u8).unwrap();
        }
        assert_eq!(buf, vec![0b10010101u8, 0b10000000u8]);
    }

    #[test]
    fn test_bitwriter_f4() {
        let mut buf = Vec::<u8>::new();
        {
            let mut writer = BitWriter::new(&mut buf);
            writer.write_f(4, 0b1000u8).unwrap();
            writer.write_f(4, 0b1011u8).unwrap();
        }
        assert_eq!(buf, vec![0b10001011u8]);
    }

    // These tests are adapted from the chromium tests at media/video/h264_bit_reader_unitttest.cc

    #[test]
    fn read_stream_without_escape_and_trailing_zero_bytes() {
        const RBSP: [u8; 6] = [0x01, 0x23, 0x45, 0x67, 0x89, 0xa0];

        let mut reader = BitReader::new(&RBSP, true);
        assert_eq!(reader.read_bits::<u32>(1).unwrap(), 0);
        assert_eq!(reader.num_bits_left(), 47);
        assert!(reader.has_more_rsbp_data());

        assert_eq!(reader.read_bits::<u32>(8).unwrap(), 0x02);
        assert_eq!(reader.num_bits_left(), 39);
        assert!(reader.has_more_rsbp_data());

        assert_eq!(reader.read_bits::<u32>(31).unwrap(), 0x23456789);
        assert_eq!(reader.num_bits_left(), 8);
        assert!(reader.has_more_rsbp_data());

        assert_eq!(reader.read_bits::<u32>(1).unwrap(), 1);
        assert_eq!(reader.num_bits_left(), 7);
        assert!(reader.has_more_rsbp_data());

        assert_eq!(reader.read_bits::<u32>(1).unwrap(), 0);
        assert_eq!(reader.num_bits_left(), 6);
        assert!(!reader.has_more_rsbp_data());
    }

    #[test]
    fn single_byte_stream() {
        const RBSP: [u8; 1] = [0x18];

        let mut reader = BitReader::new(&RBSP, true);
        assert_eq!(reader.num_bits_left(), 8);
        assert!(reader.has_more_rsbp_data());
        assert_eq!(reader.read_bits::<u32>(4).unwrap(), 1);
        assert!(!reader.has_more_rsbp_data());
    }

    #[test]
    fn stop_bit_occupy_full_byte() {
        const RBSP: [u8; 2] = [0xab, 0x80];

        let mut reader = BitReader::new(&RBSP, true);
        assert_eq!(reader.num_bits_left(), 16);
        assert!(reader.has_more_rsbp_data());

        assert_eq!(reader.read_bits::<u32>(8).unwrap(), 0xab);
        assert_eq!(reader.num_bits_left(), 8);

        assert!(!reader.has_more_rsbp_data());
    }

    // Check that read_ue behaves properly with input at the limits.
    #[test]
    fn read_ue() {
        // Regular value.
        let mut reader = BitReader::new(&[0b0001_1010], true);
        assert_eq!(reader.read_ue::<u32>().unwrap(), 12);
        assert_eq!(reader.data.position(), 1);
        assert_eq!(reader.num_remaining_bits_in_curr_byte, 1);

        // 0 value.
        let mut reader = BitReader::new(&[0b1000_0000], true);
        assert_eq!(reader.read_ue::<u32>().unwrap(), 0);
        assert_eq!(reader.data.position(), 1);
        assert_eq!(reader.num_remaining_bits_in_curr_byte, 7);

        // No prefix stop bit.
        let mut reader = BitReader::new(&[0b0000_0000], true);
        reader.read_ue::<u32>().unwrap_err();

        // u32 max value: 31 0-bits, 1 bit marker, 31 bits 1-bits.
        let mut reader = BitReader::new(
            &[
                0b0000_0000,
                0b0000_0000,
                0b0000_0000,
                0b0000_0001,
                0b1111_1111,
                0b1111_1111,
                0b1111_1111,
                0b1111_1110,
            ],
            true,
        );
        assert_eq!(reader.read_ue::<u32>().unwrap(), 0xffff_fffe);
        assert_eq!(reader.data.position(), 8);
        assert_eq!(reader.num_remaining_bits_in_curr_byte, 1);
    }

    // Check that emulation prevention is being handled correctly.
    #[test]
    fn skip_epb_when_enabled() {
        let mut reader = BitReader::new(&[0x00, 0x00, 0x03, 0x01], false);
        assert_eq!(reader.read_bits::<u32>(8).unwrap(), 0x00);
        assert_eq!(reader.read_bits::<u32>(8).unwrap(), 0x00);
        assert_eq!(reader.read_bits::<u32>(8).unwrap(), 0x03);
        assert_eq!(reader.read_bits::<u32>(8).unwrap(), 0x01);

        let mut reader = BitReader::new(&[0x00, 0x00, 0x03, 0x01], true);
        assert_eq!(reader.read_bits::<u32>(8).unwrap(), 0x00);
        assert_eq!(reader.read_bits::<u32>(8).unwrap(), 0x00);
        assert_eq!(reader.read_bits::<u32>(8).unwrap(), 0x01);
    }

    #[test]
    fn read_signed_bits() {
        let mut reader = BitReader::new(&[0b1111_0000], false);
        assert_eq!(reader.read_bits_signed::<i32>(4).unwrap(), -1);
    }
}