bytes 1.10.1

use core::iter::FromIterator;
use core::mem::{self, ManuallyDrop, MaybeUninit};
use core::ops::{Deref, DerefMut};
use core::ptr::{self, NonNull};
use core::{cmp, fmt, hash, isize, slice, usize};

use alloc::{
    borrow::{Borrow, BorrowMut},
    boxed::Box,
    string::String,
    vec,
    vec::Vec,
};

use crate::buf::{IntoIter, UninitSlice};
use crate::bytes::Vtable;
#[allow(unused)]
use crate::loom::sync::atomic::AtomicMut;
use crate::loom::sync::atomic::{AtomicPtr, AtomicUsize, Ordering};
use crate::{offset_from, Buf, BufMut, Bytes, TryGetError};

/// A unique reference to a contiguous slice of memory.
///
/// `BytesMut` represents a unique view into a potentially shared memory region.
/// Given the uniqueness guarantee, owners of `BytesMut` handles are able to
/// mutate the memory.
///
/// `BytesMut` can be thought of as containing a `buf: Arc<Vec<u8>>`, an offset
/// into `buf`, a slice length, and a guarantee that no other `BytesMut` for the
/// same `buf` overlaps with its slice. That guarantee means that a write lock
/// is not required.
///
/// # Growth
///
/// `BytesMut`'s `BufMut` implementation will implicitly grow its buffer as
/// necessary. However, explicitly reserving the required space up-front before
/// a series of inserts will be more efficient.
///
/// # Examples
///
/// ```
/// use bytes::{BytesMut, BufMut};
///
/// let mut buf = BytesMut::with_capacity(64);
///
/// buf.put_u8(b'h');
/// buf.put_u8(b'e');
/// buf.put(&b"llo"[..]);
///
/// assert_eq!(&buf[..], b"hello");
///
/// // Freeze the buffer so that it can be shared
/// let a = buf.freeze();
///
/// // This does not allocate, instead `b` points to the same memory.
/// let b = a.clone();
///
/// assert_eq!(&a[..], b"hello");
/// assert_eq!(&b[..], b"hello");
/// ```
pub struct BytesMut {
    ptr: NonNull<u8>,
    len: usize,
    cap: usize,
    data: *mut Shared,
}

// Thread-safe reference-counted container for the shared storage. This mostly
// the same as `core::sync::Arc` but without the weak counter. The ref counting
// fns are based on the ones found in `std`.
//
// The main reason to use `Shared` instead of `core::sync::Arc` is that it ends
// up making the overall code simpler and easier to reason about. This is due to
// some of the logic around setting `Inner::arc` and other ways the `arc` field
// is used. Using `Arc` ended up requiring a number of funky transmutes and
// other shenanigans to make it work.
struct Shared {
    vec: Vec<u8>,
    original_capacity_repr: usize,
    ref_count: AtomicUsize,
}

// Assert that the alignment of `Shared` is divisible by 2.
// This is a necessary invariant since we depend on allocating `Shared` a
// shared object to implicitly carry the `KIND_ARC` flag in its pointer.
// This flag is set when the LSB is 0.
const _: [(); 0 - mem::align_of::<Shared>() % 2] = []; // Assert that the alignment of `Shared` is divisible by 2.

// Buffer storage strategy flags.
const KIND_ARC: usize = 0b0;
const KIND_VEC: usize = 0b1;
const KIND_MASK: usize = 0b1;

// The max original capacity value. Any `Bytes` allocated with a greater initial
// capacity will default to this.
const MAX_ORIGINAL_CAPACITY_WIDTH: usize = 17;
// The original capacity algorithm will not take effect unless the originally
// allocated capacity was at least 1kb in size.
const MIN_ORIGINAL_CAPACITY_WIDTH: usize = 10;
// The original capacity is stored in powers of 2 starting at 1kb to a max of
// 64kb. Representing it as such requires only 3 bits of storage.
const ORIGINAL_CAPACITY_MASK: usize = 0b11100;
const ORIGINAL_CAPACITY_OFFSET: usize = 2;

const VEC_POS_OFFSET: usize = 5;
// When the storage is in the `Vec` representation, the pointer can be advanced
// at most this value. This is due to the amount of storage available to track
// the offset is usize - number of KIND bits and number of ORIGINAL_CAPACITY
// bits.
const MAX_VEC_POS: usize = usize::MAX >> VEC_POS_OFFSET;
const NOT_VEC_POS_MASK: usize = 0b11111;

#[cfg(target_pointer_width = "64")]
const PTR_WIDTH: usize = 64;
#[cfg(target_pointer_width = "32")]
const PTR_WIDTH: usize = 32;

/*
 *
 * ===== BytesMut =====
 *
 */

impl BytesMut {
    /// Creates a new `BytesMut` with the specified capacity.
    ///
    /// The returned `BytesMut` will be able to hold at least `capacity` bytes
    /// without reallocating.
    ///
    /// It is important to note that this function does not specify the length
    /// of the returned `BytesMut`, but only the capacity.
    ///
    /// # Examples
    ///
    /// ```
    /// use bytes::{BytesMut, BufMut};
    ///
    /// let mut bytes = BytesMut::with_capacity(64);
    ///
    /// // `bytes` contains no data, even though there is capacity
    /// assert_eq!(bytes.len(), 0);
    ///
    /// bytes.put(&b"hello world"[..]);
    ///
    /// assert_eq!(&bytes[..], b"hello world");
    /// ```
    #[inline]
    pub fn with_capacity(capacity: usize) -> BytesMut {
        BytesMut::from_vec(Vec::with_capacity(capacity))
    }

    /// Creates a new `BytesMut` with default capacity.
    ///
    /// Resulting object has length 0 and unspecified capacity.
    /// This function does not allocate.
    ///
    /// # Examples
    ///
    /// ```
    /// use bytes::{BytesMut, BufMut};
    ///
    /// let mut bytes = BytesMut::new();
    ///
    /// assert_eq!(0, bytes.len());
    ///
    /// bytes.reserve(2);
    /// bytes.put_slice(b"xy");
    ///
    /// assert_eq!(&b"xy"[..], &bytes[..]);
    /// ```
    #[inline]
    pub fn new() -> BytesMut {
        BytesMut::with_capacity(0)
    }

    /// Returns the number of bytes contained in this `BytesMut`.
    ///
    /// # Examples
    ///
    /// ```
    /// use bytes::BytesMut;
    ///
    /// let b = BytesMut::from(&b"hello"[..]);
    /// assert_eq!(b.len(), 5);
    /// ```
    #[inline]
    pub fn len(&self) -> usize {
        self.len
    }

    /// Returns true if the `BytesMut` has a length of 0.
    ///
    /// # Examples
    ///
    /// ```
    /// use bytes::BytesMut;
    ///
    /// let b = BytesMut::with_capacity(64);
    /// assert!(b.is_empty());
    /// ```
    #[inline]
    pub fn is_empty(&self) -> bool {
        self.len == 0
    }

    /// Returns the number of bytes the `BytesMut` can hold without reallocating.
    ///
    /// # Examples
    ///
    /// ```
    /// use bytes::BytesMut;
    ///
    /// let b = BytesMut::with_capacity(64);
    /// assert_eq!(b.capacity(), 64);
    /// ```
    #[inline]
    pub fn capacity(&self) -> usize {
        self.cap
    }

    /// Converts `self` into an immutable `Bytes`.
    ///
    /// The conversion is zero cost and is used to indicate that the slice
    /// referenced by the handle will no longer be mutated. Once the conversion
    /// is done, the handle can be cloned and shared across threads.
    ///
    /// # Examples
    ///
    /// ```
    /// use bytes::{BytesMut, BufMut};
    /// use std::thread;
    ///
    /// let mut b = BytesMut::with_capacity(64);
    /// b.put(&b"hello world"[..]);
    /// let b1 = b.freeze();
    /// let b2 = b1.clone();
    ///
    /// let th = thread::spawn(move || {
    ///     assert_eq!(&b1[..], b"hello world");
    /// });
    ///
    /// assert_eq!(&b2[..], b"hello world");
    /// th.join().unwrap();
    /// ```
    #[inline]
    pub fn freeze(self) -> Bytes {
        let bytes = ManuallyDrop::new(self);
        if bytes.kind() == KIND_VEC {
            // Just re-use `Bytes` internal Vec vtable
            unsafe {
                let off = bytes.get_vec_pos();
                let vec = rebuild_vec(bytes.ptr.as_ptr(), bytes.len, bytes.cap, off);
                let mut b: Bytes = vec.into();
                b.advance(off);
                b
            }
        } else {
            debug_assert_eq!(bytes.kind(), KIND_ARC);

            let ptr = bytes.ptr.as_ptr();
            let len = bytes.len;
            let data = AtomicPtr::new(bytes.data.cast());
            unsafe { Bytes::with_vtable(ptr, len, data, &SHARED_VTABLE) }
        }
    }

    /// Creates a new `BytesMut` containing `len` zeros.
    ///
    /// The resulting object has a length of `len` and a capacity greater
    /// than or equal to `len`. The entire length of the object will be filled
    /// with zeros.
    ///
    /// On some platforms or allocators this function may be faster than
    /// a manual implementation.
    ///
    /// # Examples
    ///
    /// ```
    /// use bytes::BytesMut;
    ///
    /// let zeros = BytesMut::zeroed(42);
    ///
    /// assert!(zeros.capacity() >= 42);
    /// assert_eq!(zeros.len(), 42);
    /// zeros.into_iter().for_each(|x| assert_eq!(x, 0));
    /// ```
    pub fn zeroed(len: usize) -> BytesMut {
        BytesMut::from_vec(vec![0; len])
    }

    /// Splits the bytes into two at the given index.
    ///
    /// Afterwards `self` contains elements `[0, at)`, and the returned
    /// `BytesMut` contains elements `[at, capacity)`. It's guaranteed that the
    /// memory does not move, that is, the address of `self` does not change,
    /// and the address of the returned slice is `at` bytes after that.
    ///
    /// This is an `O(1)` operation that just increases the reference count
    /// and sets a few indices.
    ///
    /// # Examples
    ///
    /// ```
    /// use bytes::BytesMut;
    ///
    /// let mut a = BytesMut::from(&b"hello world"[..]);
    /// let mut b = a.split_off(5);
    ///
    /// a[0] = b'j';
    /// b[0] = b'!';
    ///
    /// assert_eq!(&a[..], b"jello");
    /// assert_eq!(&b[..], b"!world");
    /// ```
    ///
    /// # Panics
    ///
    /// Panics if `at > capacity`.
    #[must_use = "consider BytesMut::truncate if you don't need the other half"]
    pub fn split_off(&mut self, at: usize) -> BytesMut {
        assert!(
            at <= self.capacity(),
            "split_off out of bounds: {:?} <= {:?}",
            at,
            self.capacity(),
        );
        unsafe {
            let mut other = self.shallow_clone();
            // SAFETY: We've checked that `at` <= `self.capacity()` above.
            other.advance_unchecked(at);
            self.cap = at;
            self.len = cmp::min(self.len, at);
            other
        }
    }

    /// Removes the bytes from the current view, returning them in a new
    /// `BytesMut` handle.
    ///
    /// Afterwards, `self` will be empty, but will retain any additional
    /// capacity that it had before the operation. This is identical to
    /// `self.split_to(self.len())`.
    ///
    /// This is an `O(1)` operation that just increases the reference count and
    /// sets a few indices.
    ///
    /// # Examples
    ///
    /// ```
    /// use bytes::{BytesMut, BufMut};
    ///
    /// let mut buf = BytesMut::with_capacity(1024);
    /// buf.put(&b"hello world"[..]);
    ///
    /// let other = buf.split();
    ///
    /// assert!(buf.is_empty());
    /// assert_eq!(1013, buf.capacity());
    ///
    /// assert_eq!(other, b"hello world"[..]);
    /// ```
    #[must_use = "consider BytesMut::clear if you don't need the other half"]
    pub fn split(&mut self) -> BytesMut {
        let len = self.len();
        self.split_to(len)
    }

    /// Splits the buffer into two at the given index.
    ///
    /// Afterwards `self` contains elements `[at, len)`, and the returned `BytesMut`
    /// contains elements `[0, at)`.
    ///
    /// This is an `O(1)` operation that just increases the reference count and
    /// sets a few indices.
    ///
    /// # Examples
    ///
    /// ```
    /// use bytes::BytesMut;
    ///
    /// let mut a = BytesMut::from(&b"hello world"[..]);
    /// let mut b = a.split_to(5);
    ///
    /// a[0] = b'!';
    /// b[0] = b'j';
    ///
    /// assert_eq!(&a[..], b"!world");
    /// assert_eq!(&b[..], b"jello");
    /// ```
    ///
    /// # Panics
    ///
    /// Panics if `at > len`.
    #[must_use = "consider BytesMut::advance if you don't need the other half"]
    pub fn split_to(&mut self, at: usize) -> BytesMut {
        assert!(
            at <= self.len(),
            "split_to out of bounds: {:?} <= {:?}",
            at,
            self.len(),
        );

        unsafe {
            let mut other = self.shallow_clone();
            // SAFETY: We've checked that `at` <= `self.len()` and we know that `self.len()` <=
            // `self.capacity()`.
            self.advance_unchecked(at);
            other.cap = at;
            other.len = at;
            other
        }
    }

    /// Shortens the buffer, keeping the first `len` bytes and dropping the
    /// rest.
    ///
    /// If `len` is greater than the buffer's current length, this has no
    /// effect.
    ///
    /// Existing underlying capacity is preserved.
    ///
    /// The [split_off](`Self::split_off()`) method can emulate `truncate`, but this causes the
    /// excess bytes to be returned instead of dropped.
    ///
    /// # Examples
    ///
    /// ```
    /// use bytes::BytesMut;
    ///
    /// let mut buf = BytesMut::from(&b"hello world"[..]);
    /// buf.truncate(5);
    /// assert_eq!(buf, b"hello"[..]);
    /// ```
    pub fn truncate(&mut self, len: usize) {
        if len <= self.len() {
            // SAFETY: Shrinking the buffer cannot expose uninitialized bytes.
            unsafe { self.set_len(len) };
        }
    }

    /// Clears the buffer, removing all data. Existing capacity is preserved.
    ///
    /// # Examples
    ///
    /// ```
    /// use bytes::BytesMut;
    ///
    /// let mut buf = BytesMut::from(&b"hello world"[..]);
    /// buf.clear();
    /// assert!(buf.is_empty());
    /// ```
    pub fn clear(&mut self) {
        // SAFETY: Setting the length to zero cannot expose uninitialized bytes.
        unsafe { self.set_len(0) };
    }

    /// Resizes the buffer so that `len` is equal to `new_len`.
    ///
    /// If `new_len` is greater than `len`, the buffer is extended by the
    /// difference with each additional byte set to `value`. If `new_len` is
    /// less than `len`, the buffer is simply truncated.
    ///
    /// # Examples
    ///
    /// ```
    /// use bytes::BytesMut;
    ///
    /// let mut buf = BytesMut::new();
    ///
    /// buf.resize(3, 0x1);
    /// assert_eq!(&buf[..], &[0x1, 0x1, 0x1]);
    ///
    /// buf.resize(2, 0x2);
    /// assert_eq!(&buf[..], &[0x1, 0x1]);
    ///
    /// buf.resize(4, 0x3);
    /// assert_eq!(&buf[..], &[0x1, 0x1, 0x3, 0x3]);
    /// ```
    pub fn resize(&mut self, new_len: usize, value: u8) {
        let additional = if let Some(additional) = new_len.checked_sub(self.len()) {
            additional
        } else {
            self.truncate(new_len);
            return;
        };

        if additional == 0 {
            return;
        }

        self.reserve(additional);
        let dst = self.spare_capacity_mut().as_mut_ptr();
        // SAFETY: `spare_capacity_mut` returns a valid, properly aligned pointer and we've
        // reserved enough space to write `additional` bytes.
        unsafe { ptr::write_bytes(dst, value, additional) };

        // SAFETY: There are at least `new_len` initialized bytes in the buffer so no
        // uninitialized bytes are being exposed.
        unsafe { self.set_len(new_len) };
    }

    /// Sets the length of the buffer.
    ///
    /// This will explicitly set the size of the buffer without actually
    /// modifying the data, so it is up to the caller to ensure that the data
    /// has been initialized.
    ///
    /// # Examples
    ///
    /// ```
    /// use bytes::BytesMut;
    ///
    /// let mut b = BytesMut::from(&b"hello world"[..]);
    ///
    /// unsafe {
    ///     b.set_len(5);
    /// }
    ///
    /// assert_eq!(&b[..], b"hello");
    ///
    /// unsafe {
    ///     b.set_len(11);
    /// }
    ///
    /// assert_eq!(&b[..], b"hello world");
    /// ```
    #[inline]
    pub unsafe fn set_len(&mut self, len: usize) {
        debug_assert!(len <= self.cap, "set_len out of bounds");
        self.len = len;
    }

    /// Reserves capacity for at least `additional` more bytes to be inserted
    /// into the given `BytesMut`.
    ///
    /// More than `additional` bytes may be reserved in order to avoid frequent
    /// reallocations. A call to `reserve` may result in an allocation.
    ///
    /// Before allocating new buffer space, the function will attempt to reclaim
    /// space in the existing buffer. If the current handle references a view
    /// into a larger original buffer, and all other handles referencing part
    /// of the same original buffer have been dropped, then the current view
    /// can be copied/shifted to the front of the buffer and the handle can take
    /// ownership of the full buffer, provided that the full buffer is large
    /// enough to fit the requested additional capacity.
    ///
    /// This optimization will only happen if shifting the data from the current
    /// view to the front of the buffer is not too expensive in terms of the
    /// (amortized) time required. The precise condition is subject to change;
    /// as of now, the length of the data being shifted needs to be at least as
    /// large as the distance that it's shifted by. If the current view is empty
    /// and the original buffer is large enough to fit the requested additional
    /// capacity, then reallocations will never happen.
    ///
    /// # Examples
    ///
    /// In the following example, a new buffer is allocated.
    ///
    /// ```
    /// use bytes::BytesMut;
    ///
    /// let mut buf = BytesMut::from(&b"hello"[..]);
    /// buf.reserve(64);
    /// assert!(buf.capacity() >= 69);
    /// ```
    ///
    /// In the following example, the existing buffer is reclaimed.
    ///
    /// ```
    /// use bytes::{BytesMut, BufMut};
    ///
    /// let mut buf = BytesMut::with_capacity(128);
    /// buf.put(&[0; 64][..]);
    ///
    /// let ptr = buf.as_ptr();
    /// let other = buf.split();
    ///
    /// assert!(buf.is_empty());
    /// assert_eq!(buf.capacity(), 64);
    ///
    /// drop(other);
    /// buf.reserve(128);
    ///
    /// assert_eq!(buf.capacity(), 128);
    /// assert_eq!(buf.as_ptr(), ptr);
    /// ```
    ///
    /// # Panics
    ///
    /// Panics if the new capacity overflows `usize`.
    #[inline]
    pub fn reserve(&mut self, additional: usize) {
        let len = self.len();
        let rem = self.capacity() - len;

        if additional <= rem {
            // The handle can already store at least `additional` more bytes, so
            // there is no further work needed to be done.
            return;
        }

        // will always succeed
        let _ = self.reserve_inner(additional, true);
    }

    // In separate function to allow the short-circuits in `reserve` and `try_reclaim` to
    // be inline-able. Significantly helps performance. Returns false if it did not succeed.
    fn reserve_inner(&mut self, additional: usize, allocate: bool) -> bool {
        let len = self.len();
        let kind = self.kind();

        if kind == KIND_VEC {
            // If there's enough free space before the start of the buffer, then
            // just copy the data backwards and reuse the already-allocated
            // space.
            //
            // Otherwise, since backed by a vector, use `Vec::reserve`
            //
            // We need to make sure that this optimization does not kill the
            // amortized runtimes of BytesMut's operations.
            unsafe {
                let off = self.get_vec_pos();

                // Only reuse space if we can satisfy the requested additional space.
                //
                // Also check if the value of `off` suggests that enough bytes
                // have been read to account for the overhead of shifting all
                // the data (in an amortized analysis).
                // Hence the condition `off >= self.len()`.
                //
                // This condition also already implies that the buffer is going
                // to be (at least) half-empty in the end; so we do not break
                // the (amortized) runtime with future resizes of the underlying
                // `Vec`.
                //
                // [For more details check issue #524, and PR #525.]
                if self.capacity() - self.len() + off >= additional && off >= self.len() {
                    // There's enough space, and it's not too much overhead:
                    // reuse the space!
                    //
                    // Just move the pointer back to the start after copying
                    // data back.
                    let base_ptr = self.ptr.as_ptr().sub(off);
                    // Since `off >= self.len()`, the two regions don't overlap.
                    ptr::copy_nonoverlapping(self.ptr.as_ptr(), base_ptr, self.len);
                    self.ptr = vptr(base_ptr);
                    self.set_vec_pos(0);

                    // Length stays constant, but since we moved backwards we
                    // can gain capacity back.
                    self.cap += off;
                } else {
                    if !allocate {
                        return false;
                    }
                    // Not enough space, or reusing might be too much overhead:
                    // allocate more space!
                    let mut v =
                        ManuallyDrop::new(rebuild_vec(self.ptr.as_ptr(), self.len, self.cap, off));
                    v.reserve(additional);

                    // Update the info
                    self.ptr = vptr(v.as_mut_ptr().add(off));
                    self.cap = v.capacity() - off;
                    debug_assert_eq!(self.len, v.len() - off);
                }

                return true;
            }
        }

        debug_assert_eq!(kind, KIND_ARC);
        let shared: *mut Shared = self.data;

        // Reserving involves abandoning the currently shared buffer and
        // allocating a new vector with the requested capacity.
        //
        // Compute the new capacity
        let mut new_cap = match len.checked_add(additional) {
            Some(new_cap) => new_cap,
            None if !allocate => return false,
            None => panic!("overflow"),
        };

        unsafe {
            // First, try to reclaim the buffer. This is possible if the current
            // handle is the only outstanding handle pointing to the buffer.
            if (*shared).is_unique() {
                // This is the only handle to the buffer. It can be reclaimed.
                // However, before doing the work of copying data, check to make
                // sure that the vector has enough capacity.
                let v = &mut (*shared).vec;

                let v_capacity = v.capacity();
                let ptr = v.as_mut_ptr();

                let offset = offset_from(self.ptr.as_ptr(), ptr);

                // Compare the condition in the `kind == KIND_VEC` case above
                // for more details.
                if v_capacity >= new_cap + offset {
                    self.cap = new_cap;
                    // no copy is necessary
                } else if v_capacity >= new_cap && offset >= len {
                    // The capacity is sufficient, and copying is not too much
                    // overhead: reclaim the buffer!

                    // `offset >= len` means: no overlap
                    ptr::copy_nonoverlapping(self.ptr.as_ptr(), ptr, len);

                    self.ptr = vptr(ptr);
                    self.cap = v.capacity();
                } else {
                    if !allocate {
                        return false;
                    }
                    // calculate offset
                    let off = (self.ptr.as_ptr() as usize) - (v.as_ptr() as usize);

                    // new_cap is calculated in terms of `BytesMut`, not the underlying
                    // `Vec`, so it does not take the offset into account.
                    //
                    // Thus we have to manually add it here.
                    new_cap = new_cap.checked_add(off).expect("overflow");

                    // The vector capacity is not sufficient. The reserve request is
                    // asking for more than the initial buffer capacity. Allocate more
                    // than requested if `new_cap` is not much bigger than the current
                    // capacity.
                    //
                    // There are some situations, using `reserve_exact` that the
                    // buffer capacity could be below `original_capacity`, so do a
                    // check.
                    let double = v.capacity().checked_shl(1).unwrap_or(new_cap);

                    new_cap = cmp::max(double, new_cap);

                    // No space - allocate more
                    //
                    // The length field of `Shared::vec` is not used by the `BytesMut`;
                    // instead we use the `len` field in the `BytesMut` itself. However,
                    // when calling `reserve`, it doesn't guarantee that data stored in
                    // the unused capacity of the vector is copied over to the new
                    // allocation, so we need to ensure that we don't have any data we
                    // care about in the unused capacity before calling `reserve`.
                    debug_assert!(off + len <= v.capacity());
                    v.set_len(off + len);
                    v.reserve(new_cap - v.len());

                    // Update the info
                    self.ptr = vptr(v.as_mut_ptr().add(off));
                    self.cap = v.capacity() - off;
                }

                return true;
            }
        }
        if !allocate {
            return false;
        }

        let original_capacity_repr = unsafe { (*shared).original_capacity_repr };
        let original_capacity = original_capacity_from_repr(original_capacity_repr);

        new_cap = cmp::max(new_cap, original_capacity);

        // Create a new vector to store the data
        let mut v = ManuallyDrop::new(Vec::with_capacity(new_cap));

        // Copy the bytes
        v.extend_from_slice(self.as_ref());

        // Release the shared handle. This must be done *after* the bytes are
        // copied.
        unsafe { release_shared(shared) };

        // Update self
        let data = (original_capacity_repr << ORIGINAL_CAPACITY_OFFSET) | KIND_VEC;
        self.data = invalid_ptr(data);
        self.ptr = vptr(v.as_mut_ptr());
        self.cap = v.capacity();
        debug_assert_eq!(self.len, v.len());
        return true;
    }

    /// Attempts to cheaply reclaim already allocated capacity for at least `additional` more
    /// bytes to be inserted into the given `BytesMut` and returns `true` if it succeeded.
    ///
    /// `try_reclaim` behaves exactly like `reserve`, except that it never allocates new storage
    /// and returns a `bool` indicating whether it was successful in doing so:
    ///
    /// `try_reclaim` returns false under these conditions:
    ///  - The spare capacity left is less than `additional` bytes AND
    ///  - The existing allocation cannot be reclaimed cheaply or it was less than
    ///    `additional` bytes in size
    ///
    /// Reclaiming the allocation cheaply is possible if the `BytesMut` has no outstanding
    /// references through other `BytesMut`s or `Bytes` which point to the same underlying
    /// storage.
    ///
    /// # Examples
    ///
    /// ```
    /// use bytes::BytesMut;
    ///
    /// let mut buf = BytesMut::with_capacity(64);
    /// assert_eq!(true, buf.try_reclaim(64));
    /// assert_eq!(64, buf.capacity());
    ///
    /// buf.extend_from_slice(b"abcd");
    /// let mut split = buf.split();
    /// assert_eq!(60, buf.capacity());
    /// assert_eq!(4, split.capacity());
    /// assert_eq!(false, split.try_reclaim(64));
    /// assert_eq!(false, buf.try_reclaim(64));
    /// // The split buffer is filled with "abcd"
    /// assert_eq!(false, split.try_reclaim(4));
    /// // buf is empty and has capacity for 60 bytes
    /// assert_eq!(true, buf.try_reclaim(60));
    ///
    /// drop(buf);
    /// assert_eq!(false, split.try_reclaim(64));
    ///
    /// split.clear();
    /// assert_eq!(4, split.capacity());
    /// assert_eq!(true, split.try_reclaim(64));
    /// assert_eq!(64, split.capacity());
    /// ```
    // I tried splitting out try_reclaim_inner after the short circuits, but it was inlined
    // regardless with Rust 1.78.0 so probably not worth it
    #[inline]
    #[must_use = "consider BytesMut::reserve if you need an infallible reservation"]
    pub fn try_reclaim(&mut self, additional: usize) -> bool {
        let len = self.len();
        let rem = self.capacity() - len;

        if additional <= rem {
            // The handle can already store at least `additional` more bytes, so
            // there is no further work needed to be done.
            return true;
        }

        self.reserve_inner(additional, false)
    }

    /// Appends given bytes to this `BytesMut`.
    ///
    /// If this `BytesMut` object does not have enough capacity, it is resized
    /// first.
    ///
    /// # Examples
    ///
    /// ```
    /// use bytes::BytesMut;
    ///
    /// let mut buf = BytesMut::with_capacity(0);
    /// buf.extend_from_slice(b"aaabbb");
    /// buf.extend_from_slice(b"cccddd");
    ///
    /// assert_eq!(b"aaabbbcccddd", &buf[..]);
    /// ```
    #[inline]
    pub fn extend_from_slice(&mut self, extend: &[u8]) {
        let cnt = extend.len();
        self.reserve(cnt);

        unsafe {
            let dst = self.spare_capacity_mut();
            // Reserved above
            debug_assert!(dst.len() >= cnt);

            ptr::copy_nonoverlapping(extend.as_ptr(), dst.as_mut_ptr().cast(), cnt);
        }

        unsafe {
            self.advance_mut(cnt);
        }
    }

    /// Absorbs a `BytesMut` that was previously split off.
    ///
    /// If the two `BytesMut` objects were previously contiguous and not mutated
    /// in a way that causes re-allocation i.e., if `other` was created by
    /// calling `split_off` on this `BytesMut`, then this is an `O(1)` operation
    /// that just decreases a reference count and sets a few indices.
    /// Otherwise this method degenerates to
    /// `self.extend_from_slice(other.as_ref())`.
    ///
    /// # Examples
    ///
    /// ```
    /// use bytes::BytesMut;
    ///
    /// let mut buf = BytesMut::with_capacity(64);
    /// buf.extend_from_slice(b"aaabbbcccddd");
    ///
    /// let split = buf.split_off(6);
    /// assert_eq!(b"aaabbb", &buf[..]);
    /// assert_eq!(b"cccddd", &split[..]);
    ///
    /// buf.unsplit(split);
    /// assert_eq!(b"aaabbbcccddd", &buf[..]);
    /// ```
    pub fn unsplit(&mut self, other: BytesMut) {
        if self.is_empty() {
            *self = other;
            return;
        }

        if let Err(other) = self.try_unsplit(other) {
            self.extend_from_slice(other.as_ref());
        }
    }

    // private

    // For now, use a `Vec` to manage the memory for us, but we may want to
    // change that in the future to some alternate allocator strategy.
    //
    // Thus, we don't expose an easy way to construct from a `Vec` since an
    // internal change could make a simple pattern (`BytesMut::from(vec)`)
    // suddenly a lot more expensive.
    #[inline]
    pub(crate) fn from_vec(vec: Vec<u8>) -> BytesMut {
        let mut vec = ManuallyDrop::new(vec);
        let ptr = vptr(vec.as_mut_ptr());
        let len = vec.len();
        let cap = vec.capacity();

        let original_capacity_repr = original_capacity_to_repr(cap);
        let data = (original_capacity_repr << ORIGINAL_CAPACITY_OFFSET) | KIND_VEC;

        BytesMut {
            ptr,
            len,
            cap,
            data: invalid_ptr(data),
        }
    }

    #[inline]
    fn as_slice(&self) -> &[u8] {
        unsafe { slice::from_raw_parts(self.ptr.as_ptr(), self.len) }
    }

    #[inline]
    fn as_slice_mut(&mut self) -> &mut [u8] {
        unsafe { slice::from_raw_parts_mut(self.ptr.as_ptr(), self.len) }
    }

    /// Advance the buffer without bounds checking.
    ///
    /// # SAFETY
    ///
    /// The caller must ensure that `count` <= `self.cap`.
    pub(crate) unsafe fn advance_unchecked(&mut self, count: usize) {
        // Setting the start to 0 is a no-op, so return early if this is the
        // case.
        if count == 0 {
            return;
        }

        debug_assert!(count <= self.cap, "internal: set_start out of bounds");

        let kind = self.kind();

        if kind == KIND_VEC {
            // Setting the start when in vec representation is a little more
            // complicated. First, we have to track how far ahead the
            // "start" of the byte buffer from the beginning of the vec. We
            // also have to ensure that we don't exceed the maximum shift.
            let pos = self.get_vec_pos() + count;

            if pos <= MAX_VEC_POS {
                self.set_vec_pos(pos);
            } else {
                // The repr must be upgraded to ARC. This will never happen
                // on 64 bit systems and will only happen on 32 bit systems
                // when shifting past 134,217,727 bytes. As such, we don't
                // worry too much about performance here.
                self.promote_to_shared(/*ref_count = */ 1);
            }
        }

        // Updating the start of the view is setting `ptr` to point to the
        // new start and updating the `len` field to reflect the new length
        // of the view.
        self.ptr = vptr(self.ptr.as_ptr().add(count));
        self.len = self.len.checked_sub(count).unwrap_or(0);
        self.cap -= count;
    }

    fn try_unsplit(&mut self, other: BytesMut) -> Result<(), BytesMut> {
        if other.capacity() == 0 {
            return Ok(());
        }

        let ptr = unsafe { self.ptr.as_ptr().add(self.len) };
        if ptr == other.ptr.as_ptr()
            && self.kind() == KIND_ARC
            && other.kind() == KIND_ARC
            && self.data == other.data
        {
            // Contiguous blocks, just combine directly
            self.len += other.len;
            self.cap += other.cap;
            Ok(())
        } else {
            Err(other)
        }
    }

    #[inline]
    fn kind(&self) -> usize {
        self.data as usize & KIND_MASK
    }

    unsafe fn promote_to_shared(&mut self, ref_cnt: usize) {
        debug_assert_eq!(self.kind(), KIND_VEC);
        debug_assert!(ref_cnt == 1 || ref_cnt == 2);

        let original_capacity_repr =
            (self.data as usize & ORIGINAL_CAPACITY_MASK) >> ORIGINAL_CAPACITY_OFFSET;

        // The vec offset cannot be concurrently mutated, so there
        // should be no danger reading it.
        let off = (self.data as usize) >> VEC_POS_OFFSET;

        // First, allocate a new `Shared` instance containing the
        // `Vec` fields. It's important to note that `ptr`, `len`,
        // and `cap` cannot be mutated without having `&mut self`.
        // This means that these fields will not be concurrently
        // updated and since the buffer hasn't been promoted to an
        // `Arc`, those three fields still are the components of the
        // vector.
        let shared = Box::new(Shared {
            vec: rebuild_vec(self.ptr.as_ptr(), self.len, self.cap, off),
            original_capacity_repr,
            ref_count: AtomicUsize::new(ref_cnt),
        });

        let shared = Box::into_raw(shared);

        // The pointer should be aligned, so this assert should
        // always succeed.
        debug_assert_eq!(shared as usize & KIND_MASK, KIND_ARC);

        self.data = shared;
    }

    /// Makes an exact shallow clone of `self`.
    ///
    /// The kind of `self` doesn't matter, but this is unsafe
    /// because the clone will have the same offsets. You must
    /// be sure the returned value to the user doesn't allow
    /// two views into the same range.
    #[inline]
    unsafe fn shallow_clone(&mut self) -> BytesMut {
        if self.kind() == KIND_ARC {
            increment_shared(self.data);
            ptr::read(self)
        } else {
            self.promote_to_shared(/*ref_count = */ 2);
            ptr::read(self)
        }
    }

    #[inline]
    unsafe fn get_vec_pos(&self) -> usize {
        debug_assert_eq!(self.kind(), KIND_VEC);

        self.data as usize >> VEC_POS_OFFSET
    }

    #[inline]
    unsafe fn set_vec_pos(&mut self, pos: usize) {
        debug_assert_eq!(self.kind(), KIND_VEC);
        debug_assert!(pos <= MAX_VEC_POS);

        self.data = invalid_ptr((pos << VEC_POS_OFFSET) | (self.data as usize & NOT_VEC_POS_MASK));
    }

    /// Returns the remaining spare capacity of the buffer as a slice of `MaybeUninit<u8>`.
    ///
    /// The returned slice can be used to fill the buffer with data (e.g. by
    /// reading from a file) before marking the data as initialized using the
    /// [`set_len`] method.
    ///
    /// [`set_len`]: BytesMut::set_len
    ///
    /// # Examples
    ///
    /// ```
    /// use bytes::BytesMut;
    ///
    /// // Allocate buffer big enough for 10 bytes.
    /// let mut buf = BytesMut::with_capacity(10);
    ///
    /// // Fill in the first 3 elements.
    /// let uninit = buf.spare_capacity_mut();
    /// uninit[0].write(0);
    /// uninit[1].write(1);
    /// uninit[2].write(2);
    ///
    /// // Mark the first 3 bytes of the buffer as being initialized.
    /// unsafe {
    ///     buf.set_len(3);
    /// }
    ///
    /// assert_eq!(&buf[..], &[0, 1, 2]);
    /// ```
    #[inline]
    pub fn spare_capacity_mut(&mut self) -> &mut [MaybeUninit<u8>] {
        unsafe {
            let ptr = self.ptr.as_ptr().add(self.len);
            let len = self.cap - self.len;

            slice::from_raw_parts_mut(ptr.cast(), len)
        }
    }
}

impl Drop for BytesMut {
    fn drop(&mut self) {
        let kind = self.kind();

        if kind == KIND_VEC {
            unsafe {
                let off = self.get_vec_pos();

                // Vector storage, free the vector
                let _ = rebuild_vec(self.ptr.as_ptr(), self.len, self.cap, off);
            }
        } else if kind == KIND_ARC {
            unsafe { release_shared(self.data) };
        }
    }
}

impl Buf for BytesMut {
    #[inline]
    fn remaining(&self) -> usize {
        self.len()
    }

    #[inline]
    fn chunk(&self) -> &[u8] {
        self.as_slice()
    }

    #[inline]
    fn advance(&mut self, cnt: usize) {
        assert!(
            cnt <= self.remaining(),
            "cannot advance past `remaining`: {:?} <= {:?}",
            cnt,
            self.remaining(),
        );
        unsafe {
            // SAFETY: We've checked that `cnt` <= `self.remaining()` and we know that
            // `self.remaining()` <= `self.cap`.
            self.advance_unchecked(cnt);
        }
    }

    fn copy_to_bytes(&mut self, len: usize) -> Bytes {
        self.split_to(len).freeze()
    }
}

unsafe impl BufMut for BytesMut {
    #[inline]
    fn remaining_mut(&self) -> usize {
        usize::MAX - self.len()
    }

    #[inline]
    unsafe fn advance_mut(&mut self, cnt: usize) {
        let remaining = self.cap - self.len();
        if cnt > remaining {
            super::panic_advance(&TryGetError {
                requested: cnt,
                available: remaining,
            });
        }
        // Addition won't overflow since it is at most `self.cap`.
        self.len = self.len() + cnt;
    }

    #[inline]
    fn chunk_mut(&mut self) -> &mut UninitSlice {
        if self.capacity() == self.len() {
            self.reserve(64);
        }
        self.spare_capacity_mut().into()
    }

    // Specialize these methods so they can skip checking `remaining_mut`
    // and `advance_mut`.

    fn put<T: Buf>(&mut self, mut src: T)
    where
        Self: Sized,
    {
        while src.has_remaining() {
            let s = src.chunk();
            let l = s.len();
            self.extend_from_slice(s);
            src.advance(l);
        }
    }

    fn put_slice(&mut self, src: &[u8]) {
        self.extend_from_slice(src);
    }

    fn put_bytes(&mut self, val: u8, cnt: usize) {
        self.reserve(cnt);
        unsafe {
            let dst = self.spare_capacity_mut();
            // Reserved above
            debug_assert!(dst.len() >= cnt);

            ptr::write_bytes(dst.as_mut_ptr(), val, cnt);

            self.advance_mut(cnt);
        }
    }
}

impl AsRef<[u8]> for BytesMut {
    #[inline]
    fn as_ref(&self) -> &[u8] {
        self.as_slice()
    }
}

impl Deref for BytesMut {
    type Target = [u8];

    #[inline]
    fn deref(&self) -> &[u8] {
        self.as_ref()
    }
}

impl AsMut<[u8]> for BytesMut {
    #[inline]
    fn as_mut(&mut self) -> &mut [u8] {
        self.as_slice_mut()
    }
}

impl DerefMut for BytesMut {
    #[inline]
    fn deref_mut(&mut self) -> &mut [u8] {
        self.as_mut()
    }
}

impl<'a> From<&'a [u8]> for BytesMut {
    fn from(src: &'a [u8]) -> BytesMut {
        BytesMut::from_vec(src.to_vec())
    }
}

impl<'a> From<&'a str> for BytesMut {
    fn from(src: &'a str) -> BytesMut {
        BytesMut::from(src.as_bytes())
    }
}

impl From<BytesMut> for Bytes {
    fn from(src: BytesMut) -> Bytes {
        src.freeze()
    }
}

impl PartialEq for BytesMut {
    fn eq(&self, other: &BytesMut) -> bool {
        self.as_slice() == other.as_slice()
    }
}

impl PartialOrd for BytesMut {
    fn partial_cmp(&self, other: &BytesMut) -> Option<cmp::Ordering> {
        self.as_slice().partial_cmp(other.as_slice())
    }
}

impl Ord for BytesMut {
    fn cmp(&self, other: &BytesMut) -> cmp::Ordering {
        self.as_slice().cmp(other.as_slice())
    }
}

impl Eq for BytesMut {}

impl Default for BytesMut {
    #[inline]
    fn default() -> BytesMut {
        BytesMut::new()
    }
}

impl hash::Hash for BytesMut {
    fn hash<H>(&self, state: &mut H)
    where
        H: hash::Hasher,
    {
        let s: &[u8] = self.as_ref();
        s.hash(state);
    }
}

impl Borrow<[u8]> for BytesMut {
    fn borrow(&self) -> &[u8] {
        self.as_ref()
    }
}

impl BorrowMut<[u8]> for BytesMut {
    fn borrow_mut(&mut self) -> &mut [u8] {
        self.as_mut()
    }
}

impl fmt::Write for BytesMut {
    #[inline]
    fn write_str(&mut self, s: &str) -> fmt::Result {
        if self.remaining_mut() >= s.len() {
            self.put_slice(s.as_bytes());
            Ok(())
        } else {
            Err(fmt::Error)
        }
    }

    #[inline]
    fn write_fmt(&mut self, args: fmt::Arguments<'_>) -> fmt::Result {
        fmt::write(self, args)
    }
}

impl Clone for BytesMut {
    fn clone(&self) -> BytesMut {
        BytesMut::from(&self[..])
    }
}

impl IntoIterator for BytesMut {
    type Item = u8;
    type IntoIter = IntoIter<BytesMut>;

    fn into_iter(self) -> Self::IntoIter {
        IntoIter::new(self)
    }
}

impl<'a> IntoIterator for &'a BytesMut {
    type Item = &'a u8;
    type IntoIter = core::slice::Iter<'a, u8>;

    fn into_iter(self) -> Self::IntoIter {
        self.as_ref().iter()
    }
}

impl Extend<u8> for BytesMut {
    fn extend<T>(&mut self, iter: T)
    where
        T: IntoIterator<Item = u8>,
    {
        let iter = iter.into_iter();

        let (lower, _) = iter.size_hint();
        self.reserve(lower);

        // TODO: optimize
        // 1. If self.kind() == KIND_VEC, use Vec::extend
        for b in iter {
            self.put_u8(b);
        }
    }
}

impl<'a> Extend<&'a u8> for BytesMut {
    fn extend<T>(&mut self, iter: T)
    where
        T: IntoIterator<Item = &'a u8>,
    {
        self.extend(iter.into_iter().copied())
    }
}

impl Extend<Bytes> for BytesMut {
    fn extend<T>(&mut self, iter: T)
    where
        T: IntoIterator<Item = Bytes>,
    {
        for bytes in iter {
            self.extend_from_slice(&bytes)
        }
    }
}

impl FromIterator<u8> for BytesMut {
    fn from_iter<T: IntoIterator<Item = u8>>(into_iter: T) -> Self {
        BytesMut::from_vec(Vec::from_iter(into_iter))
    }
}

impl<'a> FromIterator<&'a u8> for BytesMut {
    fn from_iter<T: IntoIterator<Item = &'a u8>>(into_iter: T) -> Self {
        BytesMut::from_iter(into_iter.into_iter().copied())
    }
}

/*
 *
 * ===== Inner =====
 *
 */

unsafe fn increment_shared(ptr: *mut Shared) {
    let old_size = (*ptr).ref_count.fetch_add(1, Ordering::Relaxed);

    if old_size > isize::MAX as usize {
        crate::abort();
    }
}

unsafe fn release_shared(ptr: *mut Shared) {
    // `Shared` storage... follow the drop steps from Arc.
    if (*ptr).ref_count.fetch_sub(1, Ordering::Release) != 1 {
        return;
    }

    // This fence is needed to prevent reordering of use of the data and
    // deletion of the data.  Because it is marked `Release`, the decreasing
    // of the reference count synchronizes with this `Acquire` fence. This
    // means that use of the data happens before decreasing the reference
    // count, which happens before this fence, which happens before the
    // deletion of the data.
    //
    // As explained in the [Boost documentation][1],
    //
    // > It is important to enforce any possible access to the object in one
    // > thread (through an existing reference) to *happen before* deleting
    // > the object in a different thread. This is achieved by a "release"
    // > operation after dropping a reference (any access to the object
    // > through this reference must obviously happened before), and an
    // > "acquire" operation before deleting the object.
    //
    // [1]: (www.boost.org/doc/libs/1_55_0/doc/html/atomic/usage_examples.html)
    //
    // Thread sanitizer does not support atomic fences. Use an atomic load
    // instead.
    (*ptr).ref_count.load(Ordering::Acquire);

    // Drop the data
    drop(Box::from_raw(ptr));
}

impl Shared {
    fn is_unique(&self) -> bool {
        // The goal is to check if the current handle is the only handle
        // that currently has access to the buffer. This is done by
        // checking if the `ref_count` is currently 1.
        //
        // The `Acquire` ordering synchronizes with the `Release` as
        // part of the `fetch_sub` in `release_shared`. The `fetch_sub`
        // operation guarantees that any mutations done in other threads
        // are ordered before the `ref_count` is decremented. As such,
        // this `Acquire` will guarantee that those mutations are
        // visible to the current thread.
        self.ref_count.load(Ordering::Acquire) == 1
    }
}

#[inline]
fn original_capacity_to_repr(cap: usize) -> usize {
    let width = PTR_WIDTH - ((cap >> MIN_ORIGINAL_CAPACITY_WIDTH).leading_zeros() as usize);
    cmp::min(
        width,
        MAX_ORIGINAL_CAPACITY_WIDTH - MIN_ORIGINAL_CAPACITY_WIDTH,
    )
}

fn original_capacity_from_repr(repr: usize) -> usize {
    if repr == 0 {
        return 0;
    }

    1 << (repr + (MIN_ORIGINAL_CAPACITY_WIDTH - 1))
}

#[cfg(test)]
mod tests {
    use super::*;

    #[test]
    fn test_original_capacity_to_repr() {
        assert_eq!(original_capacity_to_repr(0), 0);

        let max_width = 32;

        for width in 1..(max_width + 1) {
            let cap = 1 << width - 1;

            let expected = if width < MIN_ORIGINAL_CAPACITY_WIDTH {
                0
            } else if width < MAX_ORIGINAL_CAPACITY_WIDTH {
                width - MIN_ORIGINAL_CAPACITY_WIDTH
            } else {
                MAX_ORIGINAL_CAPACITY_WIDTH - MIN_ORIGINAL_CAPACITY_WIDTH
            };

            assert_eq!(original_capacity_to_repr(cap), expected);

            if width > 1 {
                assert_eq!(original_capacity_to_repr(cap + 1), expected);
            }

            //  MIN_ORIGINAL_CAPACITY_WIDTH must be bigger than 7 to pass tests below
            if width == MIN_ORIGINAL_CAPACITY_WIDTH + 1 {
                assert_eq!(original_capacity_to_repr(cap - 24), expected - 1);
                assert_eq!(original_capacity_to_repr(cap + 76), expected);
            } else if width == MIN_ORIGINAL_CAPACITY_WIDTH + 2 {
                assert_eq!(original_capacity_to_repr(cap - 1), expected - 1);
                assert_eq!(original_capacity_to_repr(cap - 48), expected - 1);
            }
        }
    }

    #[test]
    fn test_original_capacity_from_repr() {
        assert_eq!(0, original_capacity_from_repr(0));

        let min_cap = 1 << MIN_ORIGINAL_CAPACITY_WIDTH;

        assert_eq!(min_cap, original_capacity_from_repr(1));
        assert_eq!(min_cap * 2, original_capacity_from_repr(2));
        assert_eq!(min_cap * 4, original_capacity_from_repr(3));
        assert_eq!(min_cap * 8, original_capacity_from_repr(4));
        assert_eq!(min_cap * 16, original_capacity_from_repr(5));
        assert_eq!(min_cap * 32, original_capacity_from_repr(6));
        assert_eq!(min_cap * 64, original_capacity_from_repr(7));
    }
}

unsafe impl Send for BytesMut {}
unsafe impl Sync for BytesMut {}

/*
 *
 * ===== PartialEq / PartialOrd =====
 *
 */

impl PartialEq<[u8]> for BytesMut {
    fn eq(&self, other: &[u8]) -> bool {
        &**self == other
    }
}

impl PartialOrd<[u8]> for BytesMut {
    fn partial_cmp(&self, other: &[u8]) -> Option<cmp::Ordering> {
        (**self).partial_cmp(other)
    }
}

impl PartialEq<BytesMut> for [u8] {
    fn eq(&self, other: &BytesMut) -> bool {
        *other == *self
    }
}

impl PartialOrd<BytesMut> for [u8] {
    fn partial_cmp(&self, other: &BytesMut) -> Option<cmp::Ordering> {
        <[u8] as PartialOrd<[u8]>>::partial_cmp(self, other)
    }
}

impl PartialEq<str> for BytesMut {
    fn eq(&self, other: &str) -> bool {
        &**self == other.as_bytes()
    }
}

impl PartialOrd<str> for BytesMut {
    fn partial_cmp(&self, other: &str) -> Option<cmp::Ordering> {
        (**self).partial_cmp(other.as_bytes())
    }
}

impl PartialEq<BytesMut> for str {
    fn eq(&self, other: &BytesMut) -> bool {
        *other == *self
    }
}

impl PartialOrd<BytesMut> for str {
    fn partial_cmp(&self, other: &BytesMut) -> Option<cmp::Ordering> {
        <[u8] as PartialOrd<[u8]>>::partial_cmp(self.as_bytes(), other)
    }
}

impl PartialEq<Vec<u8>> for BytesMut {
    fn eq(&self, other: &Vec<u8>) -> bool {
        *self == other[..]
    }
}

impl PartialOrd<Vec<u8>> for BytesMut {
    fn partial_cmp(&self, other: &Vec<u8>) -> Option<cmp::Ordering> {
        (**self).partial_cmp(&other[..])
    }
}

impl PartialEq<BytesMut> for Vec<u8> {
    fn eq(&self, other: &BytesMut) -> bool {
        *other == *self
    }
}

impl PartialOrd<BytesMut> for Vec<u8> {
    fn partial_cmp(&self, other: &BytesMut) -> Option<cmp::Ordering> {
        other.partial_cmp(self)
    }
}

impl PartialEq<String> for BytesMut {
    fn eq(&self, other: &String) -> bool {
        *self == other[..]
    }
}

impl PartialOrd<String> for BytesMut {
    fn partial_cmp(&self, other: &String) -> Option<cmp::Ordering> {
        (**self).partial_cmp(other.as_bytes())
    }
}

impl PartialEq<BytesMut> for String {
    fn eq(&self, other: &BytesMut) -> bool {
        *other == *self
    }
}

impl PartialOrd<BytesMut> for String {
    fn partial_cmp(&self, other: &BytesMut) -> Option<cmp::Ordering> {
        <[u8] as PartialOrd<[u8]>>::partial_cmp(self.as_bytes(), other)
    }
}

impl<'a, T: ?Sized> PartialEq<&'a T> for BytesMut
where
    BytesMut: PartialEq<T>,
{
    fn eq(&self, other: &&'a T) -> bool {
        *self == **other
    }
}

impl<'a, T: ?Sized> PartialOrd<&'a T> for BytesMut
where
    BytesMut: PartialOrd<T>,
{
    fn partial_cmp(&self, other: &&'a T) -> Option<cmp::Ordering> {
        self.partial_cmp(*other)
    }
}

impl PartialEq<BytesMut> for &[u8] {
    fn eq(&self, other: &BytesMut) -> bool {
        *other == *self
    }
}

impl PartialOrd<BytesMut> for &[u8] {
    fn partial_cmp(&self, other: &BytesMut) -> Option<cmp::Ordering> {
        <[u8] as PartialOrd<[u8]>>::partial_cmp(self, other)
    }
}

impl PartialEq<BytesMut> for &str {
    fn eq(&self, other: &BytesMut) -> bool {
        *other == *self
    }
}

impl PartialOrd<BytesMut> for &str {
    fn partial_cmp(&self, other: &BytesMut) -> Option<cmp::Ordering> {
        other.partial_cmp(self)
    }
}

impl PartialEq<BytesMut> for Bytes {
    fn eq(&self, other: &BytesMut) -> bool {
        other[..] == self[..]
    }
}

impl PartialEq<Bytes> for BytesMut {
    fn eq(&self, other: &Bytes) -> bool {
        other[..] == self[..]
    }
}

impl From<BytesMut> for Vec<u8> {
    fn from(bytes: BytesMut) -> Self {
        let kind = bytes.kind();
        let bytes = ManuallyDrop::new(bytes);

        let mut vec = if kind == KIND_VEC {
            unsafe {
                let off = bytes.get_vec_pos();
                rebuild_vec(bytes.ptr.as_ptr(), bytes.len, bytes.cap, off)
            }
        } else {
            let shared = bytes.data as *mut Shared;

            if unsafe { (*shared).is_unique() } {
                let vec = mem::replace(unsafe { &mut (*shared).vec }, Vec::new());

                unsafe { release_shared(shared) };

                vec
            } else {
                return ManuallyDrop::into_inner(bytes).deref().to_vec();
            }
        };

        let len = bytes.len;

        unsafe {
            ptr::copy(bytes.ptr.as_ptr(), vec.as_mut_ptr(), len);
            vec.set_len(len);
        }

        vec
    }
}

#[inline]
fn vptr(ptr: *mut u8) -> NonNull<u8> {
    if cfg!(debug_assertions) {
        NonNull::new(ptr).expect("Vec pointer should be non-null")
    } else {
        unsafe { NonNull::new_unchecked(ptr) }
    }
}

/// Returns a dangling pointer with the given address. This is used to store
/// integer data in pointer fields.
///
/// It is equivalent to `addr as *mut T`, but this fails on miri when strict
/// provenance checking is enabled.
#[inline]
fn invalid_ptr<T>(addr: usize) -> *mut T {
    let ptr = core::ptr::null_mut::<u8>().wrapping_add(addr);
    debug_assert_eq!(ptr as usize, addr);
    ptr.cast::<T>()
}

unsafe fn rebuild_vec(ptr: *mut u8, mut len: usize, mut cap: usize, off: usize) -> Vec<u8> {
    let ptr = ptr.sub(off);
    len += off;
    cap += off;

    Vec::from_raw_parts(ptr, len, cap)
}

// ===== impl SharedVtable =====

static SHARED_VTABLE: Vtable = Vtable {
    clone: shared_v_clone,
    to_vec: shared_v_to_vec,
    to_mut: shared_v_to_mut,
    is_unique: shared_v_is_unique,
    drop: shared_v_drop,
};

unsafe fn shared_v_clone(data: &AtomicPtr<()>, ptr: *const u8, len: usize) -> Bytes {
    let shared = data.load(Ordering::Relaxed) as *mut Shared;
    increment_shared(shared);

    let data = AtomicPtr::new(shared as *mut ());
    Bytes::with_vtable(ptr, len, data, &SHARED_VTABLE)
}

unsafe fn shared_v_to_vec(data: &AtomicPtr<()>, ptr: *const u8, len: usize) -> Vec<u8> {
    let shared: *mut Shared = data.load(Ordering::Relaxed).cast();

    if (*shared).is_unique() {
        let shared = &mut *shared;

        // Drop shared
        let mut vec = mem::replace(&mut shared.vec, Vec::new());
        release_shared(shared);

        // Copy back buffer
        ptr::copy(ptr, vec.as_mut_ptr(), len);
        vec.set_len(len);

        vec
    } else {
        let v = slice::from_raw_parts(ptr, len).to_vec();
        release_shared(shared);
        v
    }
}

unsafe fn shared_v_to_mut(data: &AtomicPtr<()>, ptr: *const u8, len: usize) -> BytesMut {
    let shared: *mut Shared = data.load(Ordering::Relaxed).cast();

    if (*shared).is_unique() {
        let shared = &mut *shared;

        // The capacity is always the original capacity of the buffer
        // minus the offset from the start of the buffer
        let v = &mut shared.vec;
        let v_capacity = v.capacity();
        let v_ptr = v.as_mut_ptr();
        let offset = offset_from(ptr as *mut u8, v_ptr);
        let cap = v_capacity - offset;

        let ptr = vptr(ptr as *mut u8);

        BytesMut {
            ptr,
            len,
            cap,
            data: shared,
        }
    } else {
        let v = slice::from_raw_parts(ptr, len).to_vec();
        release_shared(shared);
        BytesMut::from_vec(v)
    }
}

unsafe fn shared_v_is_unique(data: &AtomicPtr<()>) -> bool {
    let shared = data.load(Ordering::Acquire);
    let ref_count = (*shared.cast::<Shared>()).ref_count.load(Ordering::Relaxed);
    ref_count == 1
}

unsafe fn shared_v_drop(data: &mut AtomicPtr<()>, _ptr: *const u8, _len: usize) {
    data.with_mut(|shared| {
        release_shared(*shared as *mut Shared);
    });
}

// compile-fails

/// ```compile_fail
/// use bytes::BytesMut;
/// #[deny(unused_must_use)]
/// {
///     let mut b1 = BytesMut::from("hello world");
///     b1.split_to(6);
/// }
/// ```
fn _split_to_must_use() {}

/// ```compile_fail
/// use bytes::BytesMut;
/// #[deny(unused_must_use)]
/// {
///     let mut b1 = BytesMut::from("hello world");
///     b1.split_off(6);
/// }
/// ```
fn _split_off_must_use() {}

/// ```compile_fail
/// use bytes::BytesMut;
/// #[deny(unused_must_use)]
/// {
///     let mut b1 = BytesMut::from("hello world");
///     b1.split();
/// }
/// ```
fn _split_must_use() {}

// fuzz tests
#[cfg(all(test, loom))]
mod fuzz {
    use loom::sync::Arc;
    use loom::thread;

    use super::BytesMut;
    use crate::Bytes;

    #[test]
    fn bytes_mut_cloning_frozen() {
        loom::model(|| {
            let a = BytesMut::from(&b"abcdefgh"[..]).split().freeze();
            let addr = a.as_ptr() as usize;

            // test the Bytes::clone is Sync by putting it in an Arc
            let a1 = Arc::new(a);
            let a2 = a1.clone();

            let t1 = thread::spawn(move || {
                let b: Bytes = (*a1).clone();
                assert_eq!(b.as_ptr() as usize, addr);
            });

            let t2 = thread::spawn(move || {
                let b: Bytes = (*a2).clone();
                assert_eq!(b.as_ptr() as usize, addr);
            });

            t1.join().unwrap();
            t2.join().unwrap();
        });
    }
}