oreka-user Mailing List for oreka

Hello!
Im using oreka 1.2 gpl

Someone stated that it should be possible of getting custom data from
sip header. What I have done is adding a variable to the sip header on
outgoing call. X-dialerid.

I have then tried with and without:

SipExtractFields>X-dialerid</SipExtractFields>

And 

[X-dialerid] in the tapefilenaming without any luck. There is no info in
the logs either

Help / Marcus

Less complicated and very easy to manage, as you'll only have to put a phone
on that vlan to record it. Nothing much nothig less.
Cheers,
Ismael



2011/6/21 Paul Peterson <pa...@it...>

> I think Ill use the VLAN method. Seems less complicated.
>
>
> On Tue, Jun 21, 2011 at 6:03 AM, Ismael Toure <ism...@gm...>wrote:
>
>> Hello Paul
>>
>>
>>
>> There are many ways to accomplish this, but it can be tricky if you have a
>> lot of phones :
>>
>>
>>
>> Basicly if you read the explaination of the file it quite clear, you’ll
>> have to allow your client and all the phones there are calling, and block
>> every single IP that you don’t want to record, (the block one will not be
>> recorded even if they call someone who is allowed) You’re config will get
>> bigger each time you add a phone to your environment, and it can be quickly
>> messy)
>>
>>
>>
>> <!-- If BlockedIpRanges is used, packets with *either* source or
>> destination -->
>>
>> <BlockedIpRanges>172.28.40.34, 172.28.40.35, 172.28.6.76,
>> 172.28.40.110</BlockedIpRanges>
>>
>>
>>
>> <!-- If AllowedIpRanges is used, only packets with *both* source and
>> destination -->
>>
>>                 <!-- matching the list are retained -->
>>
>>                 <!--<AllowedIpRanges>212.125.143.0/24, 82.150.0.0/16,
>> 82.199.64.133</AllowedIpRanges>-->
>>
>>
>>
>> The second way to accomplish this is to create and access list and apply
>> it on the switch port where ORKAUDIO is plugged allowing only the phone you
>> want to record
>>
>>
>>
>> *The best way is to create a separate (vlan) subnet for recorded phone *and
>> redirect all the VLAN to your ORKAUDIO Server using SPAN or RSPAN
>>
>> * *
>>
>> * *
>>
>> Hope that helps will you
>>
>> --
>> Ismael
>>
>
>
>
> --
>
> Regards,
> Paul Peterson
>
>
>


-- 
Ismael

I think Ill use the VLAN method. Seems less complicated.


On Tue, Jun 21, 2011 at 6:03 AM, Ismael Toure <ism...@gm...> wrote:

> Hello Paul
>
>
>
> There are many ways to accomplish this, but it can be tricky if you have a
> lot of phones :
>
>
>
> Basicly if you read the explaination of the file it quite clear, you’ll
> have to allow your client and all the phones there are calling, and block
> every single IP that you don’t want to record, (the block one will not be
> recorded even if they call someone who is allowed) You’re config will get
> bigger each time you add a phone to your environment, and it can be quickly
> messy)
>
>
>
> <!-- If BlockedIpRanges is used, packets with *either* source or
> destination -->
>
> <BlockedIpRanges>172.28.40.34, 172.28.40.35, 172.28.6.76,
> 172.28.40.110</BlockedIpRanges>
>
>
>
> <!-- If AllowedIpRanges is used, only packets with *both* source and
> destination -->
>
>                 <!-- matching the list are retained -->
>
>                 <!--<AllowedIpRanges>212.125.143.0/24, 82.150.0.0/16,
> 82.199.64.133</AllowedIpRanges>-->
>
>
>
> The second way to accomplish this is to create and access list and apply it
> on the switch port where ORKAUDIO is plugged allowing only the phone you
> want to record
>
>
>
> *The best way is to create a separate (vlan) subnet for recorded phone *and
> redirect all the VLAN to your ORKAUDIO Server using SPAN or RSPAN
>
> * *
>
> * *
>
> Hope that helps will you
>
> --
> Ismael
>



-- 

Regards,
Paul Peterson

 Hello Paul



There are many ways to accomplish this, but it can be tricky if you have a
lot of phones :



Basicly if you read the explaination of the file it quite clear, you’ll have
to allow your client and all the phones there are calling, and block every
single IP that you don’t want to record, (the block one will not be recorded
even if they call someone who is allowed) You’re config will get bigger each
time you add a phone to your environment, and it can be quickly messy)



<!-- If BlockedIpRanges is used, packets with *either* source or destination
-->

<BlockedIpRanges>172.28.40.34, 172.28.40.35, 172.28.6.76,
172.28.40.110</BlockedIpRanges>



<!-- If AllowedIpRanges is used, only packets with *both* source and
destination -->

                <!-- matching the list are retained -->

                <!--<AllowedIpRanges>212.125.143.0/24, 82.150.0.0/16,
82.199.64.133</AllowedIpRanges>-->



The second way to accomplish this is to create and access list and apply it
on the switch port where ORKAUDIO is plugged allowing only the phone you
want to record



*The best way is to create a separate (vlan) subnet for recorded phone *and
redirect all the VLAN to your ORKAUDIO Server using SPAN or RSPAN

* *

* *

Hope that helps will you

-- 
Ismael

Hello.

I am looking to limiting Orkaudio to certain phones by static IP address
assigned to the phones.

Is the pcapfilter the way to do this? if so, how does one specify multiple
individual host IP's?

Or is the Allow filter pair the way to do it so...


If my gateway is 192.168.1.10 and my phones are 192.168.1.20, 192.168.1.21,
192.168.1.22 how would it look in the config.xml?


-- 


Paul Peterson
IT Core Systems
208-287-5485

Hello!

 

Im using asterisk 1.4.36. i have used svn diff with 1.4 trunk and
monitor -rtp-14 to get a diff file which I have then patched with my
system. When starting asterisk I get

 

"[2011-06-20 15:43:07] VERBOSE[22529] logger.c: [2011-06-20 15:43:07]
-- Reloading module 'res_monitor.so' (Call Monitoring Resource)

[2011-06-20 15:43:07] DEBUG[22529] res_monitor.c: LOAD (Channel module
load) [monitor.conf]

[2011-06-20 15:43:07] VERBOSE[22529] logger.c: [2011-06-20 15:43:07]
== Parsing '/etc/asterisk/monitor.conf': [2011-06-20 15:43:07]
VERBOSE[22529] logger.c: [2011-06-20 15:43:07] Found

[2011-06-20 15:43:07] NOTICE[22529] res_monitor.c: monitor.conf:18: Bad
config option 'rtp_server' - (ignoring)

[2011-06-20 15:43:07] DEBUG[22529] res_monitor.c: monitor to
bi-precision-06 [start=9000, end=9999]"

 

The same happens if I try to insert the reportingserver hostname.

 

Any thoughts on what is wrong?

 

/ Marcus 

Hi, I'm having trouble with the installation, specifically locating the ace-5.5.8-1.centos5.i386.rpm.  Can anyone tell me where I can get this rpm from?  There doesn't seem to be an rpm package in the latest version like there is with earlier ones


Thanks

I installed Tomcat 5, JRE6 and MySQL 5.1 and when I start Tomcat I'm getting
an error in orkweb.log file:

 

011-06-07 16:18:47,588 net.sf.oreka.orktrack.OrkTrack  INFO -
========================================

2011-06-07 16:18:47,588 net.sf.oreka.orktrack.OrkTrack  INFO - OrkTrack
starting ...

2011-06-07 16:18:49,255 root  INFO - log4jConfigFile is C:\Program Files
(x86)\OrkWeb//logging.properties

2011-06-07 16:18:49,255 root  INFO -
========================================

2011-06-07 16:18:49,255 root  INFO - orkweb starting ...

2011-06-07 16:18:49,255 root  INFO - HibernateConfigFile is database.hbm.xml

2011-06-07 16:18:50,691 org.apache.tapestry.ApplicationServlet  INFO -
Initialized application servlet 'orkweb': 481 millis to create HiveMind
Registry, 1.153 millis overall.

2011-06-07 16:18:51,123 org.logicalcobwebs.proxool.ShutdownHook ERROR -
Problem calling "get cause" on IllegalStateException.

java.lang.reflect.InvocationTargetException

                at sun.reflect.NativeMethodAccessorImpl.invoke0(Native
Method)

                at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown
Source)

                at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown
Source)

                at java.lang.reflect.Method.invoke(Unknown Source)

                at
org.logicalcobwebs.proxool.ShutdownHook.remove(ShutdownHook.java:40)

                at
org.logicalcobwebs.proxool.ProxoolFacade.shutdown(ProxoolFacade.java:238)

                at
org.logicalcobwebs.proxool.ProxoolFacade.shutdown(ProxoolFacade.java:220)

                at
org.logicalcobwebs.proxool.ShutdownHook.run(ShutdownHook.java:99)

                at java.lang.Thread.run(Unknown Source)

Caused by: java.lang.IllegalStateException: Shutdown in progress

                at java.lang.ApplicationShutdownHooks.remove(Unknown Source)

                at java.lang.Runtime.removeShutdownHook(Unknown Source)

                ... 9 more 

 

Does someone have an idea what is the problem?

 

Regards,

 

Dimitrije

Little update – I’ve trawled the Oreka changelogs for parameters that sound relevant & tried the following:
<SkinnyAllowMediaAddressTransfer>, <RtpTrackbyUdpPortOnly> & <SkinnyCallInfoStopsPrevious> - all made no difference.
<RtcpDetect> - no new recordings get logged after enabling (tried this twice).

From: Chris Perkins [mailto:chr...@ma...]
Sent: 02 June 2011 08:55
To: Zahra Khani
Cc: ore...@li...
Subject: Re: [Oreka-user] how to prevent saving some successive calls in one file

Some of the segments are less than 30 seconds, yet some calls of 10+ minutes it manages to record fine. There’s a couple more SCCP related settings I’m going to try tweaking.

Chris P

From: Zahra Khani [mailto:bel...@gm...]
Sent: 02 June 2011 08:50
To: Chris Perkins
Cc: ore...@li...
Subject: Re: [Oreka-user] how to prevent saving some successive calls in one file

7.02.
Are your calls continuous or long? I saw automatic audio segmentation in oreka features for continuous audio sources.
On Thu, Jun 2, 2011 at 12:03 PM, Chris Perkins <chr...@ma...<mailto:chr...@ma...>> wrote:
I also get frequent “couldn’t find Skinny session for StopMediaTransmission” messages in the log, though the problem I see is calls being split into separate sections rather than being merged. Looks like Oreka is having trouble understanding the SCCP signalling. What version of CallManager are you recording?

From: Ismael Mory TOURE [mailto:ism...@ke...<mailto:ism...@ke...>]
Sent: 01 June 2011 13:26
To: 'Zahra Khani'; ore...@li...<mailto:ore...@li...>
Subject: Re: [Oreka-user] how to prevent saving some successive calls in one file

Hello,

I had exactly the same problem, with my recording. For some reason it only create one record in the same conditions.

I’ll appreciate to share the fix, if there is any.

Regards,

Ismael

From: Zahra Khani [mailto:bel...@gm...<mailto:bel...@gm...>]
Sent: mercredi 1 juin 2011 14:07
To: ore...@li...<mailto:ore...@li...>
Subject: [Oreka-user] how to prevent saving some successive calls in one file

hi
I wonder if somebody can help me. I have 3 stations. I call from station 1 to station 2 & after about 5 or 10 seconds of terminating it, I call from station 3 to station 2. In this situation it only generates one record & one file that contains both calls in station 2. I saw "Couldn't find Skinny session for StopMediaTransmission" error in orkaudio.log file & guess that's cause of my problem. Is there any property to add in config.xml file & solve the problem or any other idea?

___________________________________________

Ismael Mory TOURE
Systems and network Engineer
Tel.:  +33 1 70 39 74 81<tel:%2B33%201%2070%2039%2074%2081>

Mobile:  +33 6 76 85 48 36<tel:%2B33%206%2076%2085%2048%2036>
ism...@ke...<mailto:ism...@ke...>
Kepler Capital Markets
112 Avenue Kleber
75116
Paris
http://www.keplercapitalmarkets.com/

iso14001: Please print this message only if absolutely necessary. This helps to prevent waste, and protects the environment.

**** Disclaimer ****

Electronic Mail ("EM") is for informational purposes only and represents the personal opinion of the sender. EM is not research or an offer to deal in securities. Research published by Kepler Capital Markets is available at www.keplercapitalmarkets.com<http://www.keplercapitalmarkets.com>. See research disclosures at http://www.keplercapitalmarkets.com/Categories/Research/ResearchDisclosures.aspx. Terms and Conditions of Use: http://www.keplercapitalmarkets.com/Categories/EmailDisclosures.aspx. Notify sender if you cannot access links and contents will be sent to you. "Kepler Capital Markets" refers to branches, affiliates and subsidiaries of Kepler Capital Markets SA. Kepler Capital Markets, Inc. is a member of FINRA and SIPC.




------------------------------------------------------------------------------
Simplify data backup and recovery for your virtual environment with vRanger.
Installation's a snap, and flexible recovery options mean your data is safe,
secure and there when you need it. Data protection magic?
Nope - It's vRanger. Get your free trial download today.
http://p.sf.net/sfu/quest-sfdev2dev
_______________________________________________
Oreka-user mailing list
Ore...@li...<mailto:Ore...@li...>
https://lists.sourceforge.net/lists/listinfo/oreka-user

Hi All,

I just installed latest version of orkaudio and orkweb in windows XP. I
installed orkaudio first. Then I installed mysql server 5.5 and configured
the root password. After these, I installed orkweb windows installer.
Following the instruction, installed java 1.6 and then Tomcat. Also put the
same root password for DB as I put for mysql server. Then I restart the
Tomcat service and bring up the login webpage. But when I tried to use
admin/admin default login. It just doesn't allow me to login and give me
Invalid login or password error.

I checked FAQ. It said it could be caused by incorrect mysql root password.
But I double checked the settings. It's correct. Is there anything else
which can cause this issue?

Really appreciate your help.

Lou

Some of the segments are less than 30 seconds, yet some calls of 10+ minutes it manages to record fine. There’s a couple more SCCP related settings I’m going to try tweaking.

Chris P

From: Zahra Khani [mailto:bel...@gm...]
Sent: 02 June 2011 08:50
To: Chris Perkins
Cc: ore...@li...
Subject: Re: [Oreka-user] how to prevent saving some successive calls in one file

7.02.
Are your calls continuous or long? I saw automatic audio segmentation in oreka features for continuous audio sources.
On Thu, Jun 2, 2011 at 12:03 PM, Chris Perkins <chr...@ma...<mailto:chr...@ma...>> wrote:
I also get frequent “couldn’t find Skinny session for StopMediaTransmission” messages in the log, though the problem I see is calls being split into separate sections rather than being merged. Looks like Oreka is having trouble understanding the SCCP signalling. What version of CallManager are you recording?

From: Ismael Mory TOURE [mailto:ism...@ke...<mailto:ism...@ke...>]
Sent: 01 June 2011 13:26
To: 'Zahra Khani'; ore...@li...<mailto:ore...@li...>
Subject: Re: [Oreka-user] how to prevent saving some successive calls in one file

Hello,

I had exactly the same problem, with my recording. For some reason it only create one record in the same conditions.

I’ll appreciate to share the fix, if there is any.

Regards,

Ismael

From: Zahra Khani [mailto:bel...@gm...<mailto:bel...@gm...>]
Sent: mercredi 1 juin 2011 14:07
To: ore...@li...<mailto:ore...@li...>
Subject: [Oreka-user] how to prevent saving some successive calls in one file

hi
I wonder if somebody can help me. I have 3 stations. I call from station 1 to station 2 & after about 5 or 10 seconds of terminating it, I call from station 3 to station 2. In this situation it only generates one record & one file that contains both calls in station 2. I saw "Couldn't find Skinny session for StopMediaTransmission" error in orkaudio.log file & guess that's cause of my problem. Is there any property to add in config.xml file & solve the problem or any other idea?

___________________________________________

Ismael Mory TOURE
Systems and network Engineer
Tel.:  +33 1 70 39 74 81<tel:%2B33%201%2070%2039%2074%2081>

Mobile:  +33 6 76 85 48 36<tel:%2B33%206%2076%2085%2048%2036>
ism...@ke...<mailto:ism...@ke...>
Kepler Capital Markets
112 Avenue Kleber
75116
Paris
http://www.keplercapitalmarkets.com/

iso14001: Please print this message only if absolutely necessary. This helps to prevent waste, and protects the environment.

**** Disclaimer ****

Electronic Mail ("EM") is for informational purposes only and represents the personal opinion of the sender. EM is not research or an offer to deal in securities. Research published by Kepler Capital Markets is available at www.keplercapitalmarkets.com<http://www.keplercapitalmarkets.com>. See research disclosures at http://www.keplercapitalmarkets.com/Categories/Research/ResearchDisclosures.aspx. Terms and Conditions of Use: http://www.keplercapitalmarkets.com/Categories/EmailDisclosures.aspx. Notify sender if you cannot access links and contents will be sent to you. "Kepler Capital Markets" refers to branches, affiliates and subsidiaries of Kepler Capital Markets SA. Kepler Capital Markets, Inc. is a member of FINRA and SIPC.




------------------------------------------------------------------------------
Simplify data backup and recovery for your virtual environment with vRanger.
Installation's a snap, and flexible recovery options mean your data is safe,
secure and there when you need it. Data protection magic?
Nope - It's vRanger. Get your free trial download today.
http://p.sf.net/sfu/quest-sfdev2dev
_______________________________________________
Oreka-user mailing list
Ore...@li...<mailto:Ore...@li...>
https://lists.sourceforge.net/lists/listinfo/oreka-user

7.02.
Are your calls continuous or long? I saw automatic audio segmentation in
oreka features for continuous audio sources.

On Thu, Jun 2, 2011 at 12:03 PM, Chris Perkins <chr...@ma...
> wrote:

>  I also get frequent “couldn’t find Skinny session for
> StopMediaTransmission” messages in the log, though the problem I see is
> calls being split into separate sections rather than being merged. Looks
> like Oreka is having trouble understanding the SCCP signalling. What version
> of CallManager are you recording?
>
>
>
> *From:* Ismael Mory TOURE [mailto:ism...@ke...]
> *Sent:* 01 June 2011 13:26
> *To:* 'Zahra Khani'; ore...@li...
> *Subject:* Re: [Oreka-user] how to prevent saving some successive calls in
> one file
>
>
>
> Hello,
>
>
>
> I had exactly the same problem, with my recording. For some reason it only
> create one record in the same conditions.
>
>
>
> I’ll appreciate to share the fix, if there is any.
>
>
>
> Regards,
>
>
>
> Ismael
>
>
>
> *From:* Zahra Khani [mailto:bel...@gm...]
> *Sent:* mercredi 1 juin 2011 14:07
> *To:* ore...@li...
> *Subject:* [Oreka-user] how to prevent saving some successive calls in one
> file
>
>
>
> hi
> I wonder if somebody can help me. I have 3 stations. I call from station 1
> to station 2 & after about 5 or 10 seconds of terminating it, I call from
> station 3 to station 2. In this situation it only generates one record & one
> file that contains both calls in station 2. I saw "Couldn't find Skinny
> session for StopMediaTransmission" error in orkaudio.log file & guess that's
> cause of my problem. Is there any property to add in config.xml file & solve
> the problem or any other idea?
>
> ___________________________________________
>
> *Ismael Mory TOURE**
> **Systems and network Engineer **
> *Tel.:  +33 1 70 39 74 81
>
> Mobile:  +33 6 76 85 48 36
> ism...@ke...
> Kepler Capital Markets
> 112 Avenue Kleber
> 75116
> Paris
> http://www.keplercapitalmarkets.com/
>
> iso14001: Please print this message only if absolutely necessary. This
> helps to prevent waste, and protects the environment.
>    *
> ***** Disclaimer ****
>
> Electronic Mail ("EM") is for informational purposes only and represents
> the personal opinion of the sender. EM is not research or an offer to deal
> in securities. Research published by Kepler Capital Markets is available at
> www.keplercapitalmarkets.com. See research disclosures at
> http://www.keplercapitalmarkets.com/Categories/Research/ResearchDisclosures.aspx.
> Terms and Conditions of Use:
> http://www.keplercapitalmarkets.com/Categories/EmailDisclosures.aspx.
> Notify sender if you cannot access links and contents will be sent to you.
> "Kepler Capital Markets" refers to branches, affiliates and subsidiaries of
> Kepler Capital Markets SA. Kepler Capital Markets, Inc. is a member of FINRA
> and SIPC.
>
>
>
>
>
>
> ------------------------------------------------------------------------------
> Simplify data backup and recovery for your virtual environment with
> vRanger.
> Installation's a snap, and flexible recovery options mean your data is
> safe,
> secure and there when you need it. Data protection magic?
> Nope - It's vRanger. Get your free trial download today.
> http://p.sf.net/sfu/quest-sfdev2dev
> _______________________________________________
> Oreka-user mailing list
> Ore...@li...
> https://lists.sourceforge.net/lists/listinfo/oreka-user
>
>

I also get frequent “couldn’t find Skinny session for StopMediaTransmission” messages in the log, though the problem I see is calls being split into separate sections rather than being merged. Looks like Oreka is having trouble understanding the SCCP signalling. What version of CallManager are you recording?

From: Ismael Mory TOURE [mailto:ism...@ke...]
Sent: 01 June 2011 13:26
To: 'Zahra Khani'; ore...@li...
Subject: Re: [Oreka-user] how to prevent saving some successive calls in one file

Hello,

I had exactly the same problem, with my recording. For some reason it only create one record in the same conditions.

I’ll appreciate to share the fix, if there is any.

Regards,

Ismael

From: Zahra Khani [mailto:bel...@gm...]
Sent: mercredi 1 juin 2011 14:07
To: ore...@li...
Subject: [Oreka-user] how to prevent saving some successive calls in one file

hi
I wonder if somebody can help me. I have 3 stations. I call from station 1 to station 2 & after about 5 or 10 seconds of terminating it, I call from station 3 to station 2. In this situation it only generates one record & one file that contains both calls in station 2. I saw "Couldn't find Skinny session for StopMediaTransmission" error in orkaudio.log file & guess that's cause of my problem. Is there any property to add in config.xml file & solve the problem or any other idea?

___________________________________________

Ismael Mory TOURE
Systems and network Engineer
Tel.:  +33 1 70 39 74 81

Mobile:  +33 6 76 85 48 36
ism...@ke...<mailto:ism...@ke...>
Kepler Capital Markets
112 Avenue Kleber
75116
Paris
http://www.keplercapitalmarkets.com/

iso14001: Please print this message only if absolutely necessary. This helps to prevent waste, and protects the environment.

**** Disclaimer ****

Electronic Mail ("EM") is for informational purposes only and represents the personal opinion of the sender. EM is not research or an offer to deal in securities. Research published by Kepler Capital Markets is available at www.keplercapitalmarkets.com<http://www.keplercapitalmarkets.com>. See research disclosures at http://www.keplercapitalmarkets.com/Categories/Research/ResearchDisclosures.aspx. Terms and Conditions of Use: http://www.keplercapitalmarkets.com/Categories/EmailDisclosures.aspx. Notify sender if you cannot access links and contents will be sent to you. "Kepler Capital Markets" refers to branches, affiliates and subsidiaries of Kepler Capital Markets SA. Kepler Capital Markets, Inc. is a member of FINRA and SIPC.

I think you should use <RtpPayloadTypeBlockList> in VoIpPlugin section to
drop some RTP payload types.
for example I used <RtpPayloadTypeBlockList>34</RtpPayloadTypeBlockList> to
block h263 video codec that was generating some records having IP address.

On Tue, May 31, 2011 at 1:54 PM, Chris Perkins <chr...@ma...
> wrote:

>  Hi,
>
> I was wondering if anyone else has encountered this? We’ve setup Oreka on a
> CentOS box monitoring a Cisco UC540 running v8.1 software with all phones
> using SCCP. <SkinnyCucm7Mode> is enabled (otherwise it can’t ID any calls
> correctly), however we frequently see calls logged with an IP address
> instead of a phone number & unknown direction. Sometimes this matches up
> with a call being transferred, however other times when no transfer has
> taken place the recording is split into multiple segments (all logged as
> separate calls), with some of the segments having an IP address instead of a
> phone number.
>
> Not sure if it’s relevant, but I tried enabled
> <SkinnyAllowMediaAddressTransfer> which didn’t make any difference.
>
> I’ve attached a screenshot showing examples.
>
>
>
> Cheers,
>
> Chris P
>
>
> ------------------------------------------------------------------------------
> Simplify data backup and recovery for your virtual environment with
> vRanger.
> Installation's a snap, and flexible recovery options mean your data is
> safe,
> secure and there when you need it. Data protection magic?
> Nope - It's vRanger. Get your free trial download today.
> http://p.sf.net/sfu/quest-sfdev2dev
> _______________________________________________
> Oreka-user mailing list
> Ore...@li...
> https://lists.sourceforge.net/lists/listinfo/oreka-user
>
>

Hello,

I had exactly the same problem, with my recording. For some reason it only create one record in the same conditions.

I’ll appreciate to share the fix, if there is any.

Regards,

Ismael

From: Zahra Khani [mailto:bel...@gm...]
Sent: mercredi 1 juin 2011 14:07
To: ore...@li...
Subject: [Oreka-user] how to prevent saving some successive calls in one file

hi
I wonder if somebody can help me. I have 3 stations. I call from station 1 to station 2 & after about 5 or 10 seconds of terminating it, I call from station 3 to station 2. In this situation it only generates one record & one file that contains both calls in station 2. I saw "Couldn't find Skinny session for StopMediaTransmission" error in orkaudio.log file & guess that's cause of my problem. Is there any property to add in config.xml file & solve the problem or any other idea?

___________________________________________

Ismael Mory TOURE
Systems and network Engineer
Tel.:  +33 1 70 39 74 81

Mobile:  +33 6 76 85 48 36
ism...@ke...
Kepler Capital Markets
112 Avenue Kleber
75116
Paris
http://www.keplercapitalmarkets.com/

iso14001: Please print this message only if absolutely necessary. This helps to prevent waste, and protects the environment.

**** Disclaimer ****

Electronic Mail ("EM") is for informational purposes only and represents the personal opinion of the sender. EM is not research or an offer to deal in securities. Research published by Kepler Capital Markets is available at www.keplercapitalmarkets.com. See research disclosures at http://www.keplercapitalmarkets.com/Categories/Research/ResearchDisclosures.aspx. Terms and Conditions of Use: http://www.keplercapitalmarkets.com/Categories/EmailDisclosures.aspx. Notify sender if you cannot access links and contents will be sent to you. "Kepler Capital Markets" refers to branches, affiliates and subsidiaries of Kepler Capital Markets SA. Kepler Capital Markets, Inc. is a member of FINRA and SIPC.

hi
I wonder if somebody can help me. I have 3 stations. I call from station 1
to station 2 & after about 5 or 10 seconds of terminating it, I call from
station 3 to station 2. In this situation it only generates one record & one
file that contains both calls in station 2. I saw "Couldn't find Skinny
session for StopMediaTransmission" error in orkaudio.log file & guess that's
cause of my problem. Is there any property to add in config.xml file & solve
the problem or any other idea?

hi
where can I find all usable parameters of config.xml file?