ipcop-devel Mailing List for IPCop Firewall

On 2014-04-29 23:20, Bob Brewer wrote:

>> Try to disable web proxy.
>>
>
> There is another bug generated when you do that see:
>
> http://tinyurl.com/nm5xndc

That is only a problem if you have something added to the end of 
makegraphs.pl.


Olaf

Michael Rasmussen wrote:

> On Tue, 29 Apr 2014 18:47:26 +0100
> Bob Brewer <ipc...@gr...> wrote:
> 
>> 
>> Also I am not running all available services, IPsec, OpenVPN Server and
>> URL Filter are stopped.
>> 
> Try to disable web proxy.
> 

There is another bug generated when you do that see:

http://tinyurl.com/nm5xndc


Bob

Olaf Westrik wrote:

> 
> Last I looked the Alix.2d13 has 256 MiB.
> As soon as stuff is stored in /ram and/or /tmp that means less memory
> available for system and services.
> 
You are quite right my memory must be failing :(  The Alix board only has 
256  MB of memory.


>> This does seem to be a peak loading problem which
>> would seem to have increased with the latest release of software.
> 
> Maybe not. Especially log files can and will (by design) influence RAM
> on Flash installations. So those should be monitored closely.
>
> Make sure the web proxy has 0 for memory and disk cache, and keep
> logging disabled.

OK, I had 4 MB set for the cache and logging enabled (default?).

I'll reset these to your suggestions and set makegraphs.pl  back to normal 
timing and see if I am still getting problems. 


Bob

On 2014-04-29 19:47, Bob Brewer wrote:

> You are correct, the Alix board is a flash install with the 512 MB of memory
> divided between the RAM disk (128 MB for /tmp and 128 MB for /ram) and 256
> MB for system memory.

Last I looked the Alix.2d13 has 256 MiB.
As soon as stuff is stored in /ram and/or /tmp that means less memory 
available for system and services.


> Significantly this system has run faultlessly for 4 years in this
> configuration with 1.9 and 2.0 versions, and is only showing problems since
> the 2.1 upgrade. This does seem to be a peak loading problem which would
> seem to have increased with the latest release of software.

Maybe not. Especially log files can and will (by design) influence RAM 
on Flash installations. So those should be monitored closely.

Make sure the web proxy has 0 for memory and disk cache, and keep 
logging disabled.

Olaf

On Tue, 29 Apr 2014 18:47:26 +0100
Bob Brewer <ipc...@gr...> wrote:

> 
> Also I am not running all available services, IPsec, OpenVPN Server and URL 
> Filter are stopped.
> 
Try to disable web proxy.

-- 
Hilsen/Regards
Michael Rasmussen

Get my public GnuPG keys:
michael <at> rasmussen <dot> cc
http://pgp.mit.edu:11371/pks/lookup?op=get&search=0xD3C9A00E
mir <at> datanom <dot> net
http://pgp.mit.edu:11371/pks/lookup?op=get&search=0xE501F51C
mir <at> miras <dot> org
http://pgp.mit.edu:11371/pks/lookup?op=get&search=0xE3E80917
--------------------------------------------------------------
/usr/games/fortune -es says:
You can't break eggs without making an omelet.

Olaf Westrik wrote:

> On 2014-04-29 11:41, Bob Brewer wrote:
> 
>> I should say that this isn't a clean install of IPCop 2.1.4 and I am
>> running my Adslmonitor addon plus an blocklist which adds about 500 extra
>> entries to Iptables. I have previously moved the adslmonitor script to
>> run 2 minutes later in fcron and doesn't now seem to be causing any
>> conflicts.
> 
> You are running out of memory. Base system, running services and large
> logfiles (you have not written so, but I expect you to run a flash
> installation), all compete for 256 MiB.
> 

Thank you for your reply,

You are correct, the Alix board is a flash install with the 512 MB of memory 
divided between the RAM disk (128 MB for /tmp and 128 MB for /ram) and 256 
MB for system memory.

df shows only 50MB is in use in /ram and 0 MB in /tmp so maybe there is an 
opportunity to recover some memory from the ram disk.

Also I am not running all available services, IPsec, OpenVPN Server and URL 
Filter are stopped.

Significantly this system has run faultlessly for 4 years in this 
configuration with 1.9 and 2.0 versions, and is only showing problems since 
the 2.1 upgrade. This does seem to be a peak loading problem which would 
seem to have increased with the latest release of software.


Bob   



  

On 2014-04-29 11:41, Bob Brewer wrote:

> I should say that this isn't a clean install of IPCop 2.1.4 and I am running
> my Adslmonitor addon plus an blocklist which adds about 500 extra entries to
> Iptables. I have previously moved the adslmonitor script to run 2 minutes
> later in fcron and doesn't now seem to be causing any conflicts.

You are running out of memory. Base system, running services and large 
logfiles (you have not written so, but I expect you to run a flash 
installation), all compete for 256 MiB.


Olaf

Olaf Westrik wrote:

> On 2014-04-29 10:55, Bob Brewer wrote:
> 
>> Could the developers have a look at the peak loading requirements with
>> the latest version of IPCop when running on memory challenged systems
>> like the Alix as I think it would be shame to see that it was no longer
>> suitable for running IPCop.
> 
> Requirements vary (greatly!) depending on activated services.
> 
> Which scripts are terminating and what's the runtime of fcron jobs?
> More questions likely to come as information trickles in.
> 
> 


After moving makegraphs.pl to run 1 minute later I am not seeing any 
terminations. But for example my messages log for 25th April shows:

Apr 25 00:10:11 griffith2 fcron[10974]: Job 
/usr/local/bin/aggregatetraffic.pl > /dev/null terminated (exit status: 1)
Apr 25 00:10:11 griffith2 fcron[10966]: Job /usr/local/bin/makegraphs.pl 
>/dev/null terminated (exit status: 1)
Apr 25 16:30:15 griffith2 fcron[18980]: Job /usr/local/bin/monitorTraffic.pl 
> /dev/null terminated (exit status: 1)
Apr 25 17:30:15 griffith2 fcron[19445]: Job /usr/local/bin/setddns.pl --cron 
terminated (exit status: 1)
Apr 25 17:30:15 griffith2 fcron[19451]: Job /usr/local/bin/monitorTraffic.pl 
> /dev/null terminated (exit status: 1)
Apr 25 18:30:15 griffith2 fcron[19914]: Job /usr/local/bin/scheduler.pl --
cron >/dev/null terminated (exit status: 1)
Apr 25 18:30:15 griffith2 fcron[19916]: Job /usr/local/bin/setddns.pl --cron 
terminated (exit status: 1)
Apr 25 19:30:16 griffith2 fcron[20397]: Job /usr/local/bin/monitorTraffic.pl 
> /dev/null terminated (exit status: 1)
Apr 25 19:30:16 griffith2 fcron[20389]: Job /usr/local/bin/scheduler.pl --
cron >/dev/null terminated (exit status: 1)
Apr 25 19:30:16 griffith2 fcron[20391]: Job /usr/local/bin/setddns.pl --cron 
terminated (exit status: 1)
Apr 25 22:30:15 griffith2 fcron[21822]: Job /usr/local/bin/makegraphs.pl 
>/dev/null terminated (exit status: 1)
Apr 25 22:30:15 griffith2 fcron[21832]: Job /usr/local/bin/monitorTraffic.pl 
> /dev/null terminated (exit status: 1)

and excerpt from yesterday:


Apr 28 15:00:00 griffith2 fcron[24473]: Job /usr/local/bin/makegraphs.pl 
>/dev/null started for user root (pid 24474)
Apr 28 15:00:00 griffith2 fcron[24475]: Job /usr/local/bin/scheduler.pl --
cron >/dev/null started for user root (pid 24476)
Apr 28 15:00:00 griffith2 fcron[24477]: Job /usr/local/bin/setddns.pl --cron 
started for user root (pid 24478)
Apr 28 15:00:00 griffith2 fcron[24481]: Job 
/usr/local/bin/aggregatetraffic.pl > /dev/null started for user root (pid 
24482)
Apr 28 15:00:00 griffith2 fcron[24479]: Job /usr/local/bin/setfwrules --cron 
> /dev/null started for user root (pid 24480)
Apr 28 15:00:00 griffith2 fcron[24483]: Job /usr/local/bin/monitorTraffic.pl 
> /dev/null started for user root (pid 24485)
Apr 28 15:00:09 griffith2 t of memory [15060]
Apr 28 15:00:09 griffith2 t of memory [15060]
Apr 28 15:00:09 griffith2 t of memory [15060]
Apr 28 15:00:09 griffith2 t of memory [15060]
Apr 28 15:00:09 griffith2 t of memory [15060]
Apr 28 15:00:09 griffith2 t of memory [15060]
Apr 28 15:00:09 griffith2 t of memory [15060]
Apr 28 15:00:09 griffith2 t of memory [15060]
Apr 28 15:00:09 griffith2 t of memory [15060]
Apr 28 15:00:09 griffith2 t of memory [15060]
Apr 28 15:00:10 griffith2 t of memory [15060]
Apr 28 15:00:10 griffith2 t of memory [15060]
Apr 28 15:00:10 griffith2 t of memory [15060]
Apr 28 15:00:10 griffith2 t of memory [15060]
Apr 28 15:00:10 griffith2 squid[5254]: Squid Parent: (squid-1) process 15060 
exited due to signal 6 with status 0
Apr 28 15:00:13 griffith2 squid[5254]: Squid Parent: (squid-1) process 24492 
started
Apr 28 15:00:13 griffith2 fcron[24475]: Job /usr/local/bin/scheduler.pl --
cron >/dev/null completed
Apr 28 15:00:13 griffith2 fcron[24477]: Job /usr/local/bin/setddns.pl --cron 
completed
Apr 28 15:00:13 griffith2 squid[24492]: Starting Squid Cache version 3.3.12 
for i686-pc-linux-gnu...
Apr 28 15:00:13 griffith2 squid[24492]: Process ID 24492
Apr 28 15:00:13 griffith2 squid[24492]: Process Roles: worker
Apr 28 15:00:13 griffith2 squid[24492]: With 1024 file descriptors available
Apr 28 15:00:13 griffith2 squid[24492]: Initializing IP Cache...
Apr 28 15:00:13 griffith2 squid[24492]: DNS Socket created at 0.0.0.0, FD 8
Apr 28 15:00:13 griffith2 squid[24492]: Adding nameserver 127.0.0.1 from 
/etc/resolv.conf
Apr 28 15:00:13 griffith2 squid[24492]: Logfile: opening log 
stdio:/var/log/squid/access.log
Apr 28 15:00:13 griffith2 squid[24492]: Store logging disabled
Apr 28 15:00:13 griffith2 squid[24492]: Swap maxSize 0 + 4096 KB, estimated 
315 objects
Apr 28 15:00:13 griffith2 squid[24492]: Target number of buckets: 15
Apr 28 15:00:13 griffith2 squid[24492]: Using 8192 Store buckets
Apr 28 15:00:13 griffith2 squid[24492]: Max Mem  size: 4096 KB
Apr 28 15:00:13 griffith2 squid[24492]: Max Swap size: 0 KB
Apr 28 15:00:13 griffith2 squid[24492]: Using Least Load store dir selection
Apr 28 15:00:13 griffith2 squid[24492]: Current Directory is 
/home/httpd/cgi-bin
Apr 28 15:00:14 griffith2 fcron[24479]: Job /usr/local/bin/setfwrules --cron 
> /dev/null completed
Apr 28 15:00:14 griffith2 fcron[24483]: Job /usr/local/bin/monitorTraffic.pl 
> /dev/null completed
Apr 28 15:00:14 griffith2 squid[24492]: Loaded Icons.
Apr 28 15:00:14 griffith2 squid[24492]: HTCP Disabled.
Apr 28 15:00:14 griffith2 squid[24492]: Squid plugin modules loaded: 0
Apr 28 15:00:14 griffith2 squid[24492]: Accepting HTTP Socket connections at 
local=127.0.0.1:82 remote=[::] FD 10 flags=9
Apr 28 15:00:14 griffith2 squid[24492]: Accepting HTTP Socket connections at 
local=192.168.0.254:8080 remote=[::] FD 11 flags=9
Apr 28 15:00:14 griffith2 squid[24492]: Accepting NAT intercepted HTTP 
Socket connections at local=192.168.0.254:82 remote=[::] FD 12 flags=41
Apr 28 15:00:14 griffith2 squid[24492]: Accepting HTTP Socket connections at 
local=10.0.100.254:8080 remote=[::] FD 13 flags=9
Apr 28 15:00:14 griffith2 squid[24492]: Accepting NAT intercepted HTTP 
Socket connections at local=10.0.100.254:82 remote=[::] FD 14 flags=41
Apr 28 15:00:14 griffith2 squid[24492]: storeLateRelease: released 0 objects
Apr 28 15:00:19 griffith2 fcron[24481]: Job 
/usr/local/bin/aggregatetraffic.pl > /dev/null completed
Apr 28 15:00:24 griffith2 fcron[24473]: Job /usr/local/bin/makegraphs.pl 
>/dev/null completed



I should say that this isn't a clean install of IPCop 2.1.4 and I am running 
my Adslmonitor addon plus an blocklist which adds about 500 extra entries to 
Iptables. I have previously moved the adslmonitor script to run 2 minutes 
later in fcron and doesn't now seem to be causing any conflicts.





Bob

Hi there,

On Tue, 29 Apr 2014, Olaf Westrik wrote:

> Requirements vary (greatly!) depending on activated services.
>
> Which scripts are terminating ... ?

I never run the 'makegraphs' scripts.

For a decade I've had IPCop running on old machines with 64Mbytes of
RAM.  Some older machines even had only 32Mbytes, but they've long
since gone to that bit-bucket in the sky.

There's no reason to throw out those old machines while they can still
economically perform a useful task.

The more bloat there is, the more security holes there will be in it.

--

73,
Ged.

On 2014-04-29 10:55, Bob Brewer wrote:

> Could the developers have a look at the peak loading requirements with the
> latest version of IPCop when running on memory challenged systems like the
> Alix as I think it would be shame to see that it was no longer suitable for
> running IPCop.

Requirements vary (greatly!) depending on activated services.

Which scripts are terminating and what's the runtime of fcron jobs?
More questions likely to come as information trickles in.


Olaf

Since the 2.1 upgrade I have been experiencing numerous script terminations 
(exit status: 1) and segfaults which I haven't seen when running the 
previous 1.9 and 2.0 versions (over the last 4 years).

It would appear that the  256 MB of available memory with the Alix board is 
now insufficient to meet the peak loading of the currently released 2.1 
versions when the scheduled scripts run at 5 minute intervals.

To mitigate the problem I have tried (with some success) to stagger the time 
when the various scripts are started (eg running makegraphs.pl 1 minute 
later by editing fcrontab).

Could the developers have a look at the peak loading requirements with the 
latest version of IPCop when running on memory challenged systems like the 
Alix as I think it would be shame to see that it was no longer suitable for 
running IPCop.


Bob

For those feeling courageous and lucky, 2.1.5-rc1 installation and
update files are available on SourceForge.
The 2.1.5-rc1 update requires a 2.1.4 installation and can only be 
manually updated via the GUI!


***
2.1.5-rc1 is for testing purposes and cannot be updated to 2.1.5.
***

When testing the installation and or update, make sure to have uptodate
and working backups to be able to return to 2.1.4.

Expect release of 2.1.5 in around 10 days, maybe earlier, maybe later.
Until then only bug-fixes and language updates.


Download from: http://sourceforge.net/projects/ipcop/files/IPCop Test 
Versions/


Update
9af529ade97424f4c97d861325e9d4f0  ipcop-2.1.5-rc1-update.i486.tgz.gpg

Installation
5f40b5f738bbb3904f9d467109db8d54  ipcop-2.1.5-rc1-install-cd.i486.iso
ba34d0f559a42c8c172e418f9583ef06  ipcop-2.1.5-rc1-install-netboot.i486.tgz
65b3cb54ec1643e98f67c320a0e371c5 
ipcop-2.1.5-rc1-install-usb-fdd.i486.img.gz
aea50737bc68445dfc2d0c7c8f64c13a 
ipcop-2.1.5-rc1-install-usb-hdd.i486.img.gz


Olaf

Hello Translators,

2 new phrases where added for IPCop 2.1.5 and I'd be good if these were 
added to the Language Database http://www.ipcop.org/langs

Thanks

Olaf

On 2014-04-22 12:47, Eric Oberlander wrote:

> Your SVN commit 7492 has fixed my problem. Thanks.

I stumbled on a different problem during util-linux build, but if it 
solves other problems too that's a good thing (I think :-))


Olaf

Hi Olaf

Your SVN commit 7492 has fixed my problem. Thanks.

Eric


On 21 April 2014 16:47, Eric Oberlander <eri...@gm...> wrote:

> Thanks Gilles
>
> I'm building on a Linux Mint 15 box, an i686 Intel i3, with 8Gb of RAM, in
> case that helps.
>
> Eric
>
>
>
> On 21 April 2014 16:12, Gilles Espinasse <g....@fr...> wrote:
>
>>
>>
>> ----- Mail original -----
>> > De: "Olaf Westrik" <wei...@ip...>
>> > À: "Eric Oberlander" <eri...@gm...>
>> > Cc: "IPCop devel" <ipc...@li...>
>> > Envoyé: Lundi 21 Avril 2014 16:57:59
>> > Objet: Re: [IPCop-devel] 2.1.2 i486 toolchain
>> >
>> > This is what I see:
>> >
>> >
>> ...
>> >   /tools_i486/bin/mkdir -p
>> >   '/tools_i486/share/bash-completion/completions'
>>
>>
>>
>> `/home/eric/Documents/ipcop-svn/ipcop/trunk/build_i486/ipcop/usr/src/util-linux-2.24.1'
>>   /tools_i486/bin/mkdir -p '/usr/share/bash-completion/completions'
>>
>> On Eric build, script try to install to real fs while Olaf build install
>> in /tools_i486
>> This explain why one build complete while the other stop.
>>
>> Now remain to explain why both build behave not the same. I would look at
>> configure result first.
>>
>> Gilles
>>
>
>

Thanks Gilles

I'm building on a Linux Mint 15 box, an i686 Intel i3, with 8Gb of RAM, in
case that helps.

Eric



On 21 April 2014 16:12, Gilles Espinasse <g....@fr...> wrote:

>
>
> ----- Mail original -----
> > De: "Olaf Westrik" <wei...@ip...>
> > À: "Eric Oberlander" <eri...@gm...>
> > Cc: "IPCop devel" <ipc...@li...>
> > Envoyé: Lundi 21 Avril 2014 16:57:59
> > Objet: Re: [IPCop-devel] 2.1.2 i486 toolchain
> >
> > This is what I see:
> >
> >
> ...
> >   /tools_i486/bin/mkdir -p
> >   '/tools_i486/share/bash-completion/completions'
>
>
>
> `/home/eric/Documents/ipcop-svn/ipcop/trunk/build_i486/ipcop/usr/src/util-linux-2.24.1'
>   /tools_i486/bin/mkdir -p '/usr/share/bash-completion/completions'
>
> On Eric build, script try to install to real fs while Olaf build install
> in /tools_i486
> This explain why one build complete while the other stop.
>
> Now remain to explain why both build behave not the same. I would look at
> configure result first.
>
> Gilles
>

----- Mail original -----
> De: "Olaf Westrik" <wei...@ip...>
> À: "Eric Oberlander" <eri...@gm...>
> Cc: "IPCop devel" <ipc...@li...>
> Envoyé: Lundi 21 Avril 2014 16:57:59
> Objet: Re: [IPCop-devel] 2.1.2 i486 toolchain
> 
> This is what I see:
> 
> 
...
>   /tools_i486/bin/mkdir -p
>   '/tools_i486/share/bash-completion/completions'


`/home/eric/Documents/ipcop-svn/ipcop/trunk/build_i486/ipcop/usr/src/util-linux-2.24.1'
  /tools_i486/bin/mkdir -p '/usr/share/bash-completion/completions'

On Eric build, script try to install to real fs while Olaf build install in /tools_i486
This explain why one build complete while the other stop.

Now remain to explain why both build behave not the same. I would look at configure result first.

Gilles

This is what I see:


cd /home/owes/svn/dev/trunk/build_i486/ipcop/usr/src/util-linux-2.24.1 
&& make -j 5 install
make[1]: Entering directory 
`/home/owes/svn/dev/trunk/build_i486/ipcop/usr/src/util-linux-2.24.1'
make  install-recursive
make[2]: Entering directory 
`/home/owes/svn/dev/trunk/build_i486/ipcop/usr/src/util-linux-2.24.1'
Making install in po
make[3]: Entering directory 
`/home/owes/svn/dev/trunk/build_i486/ipcop/usr/src/util-linux-2.24.1/po'
if test "util-linux" = "gettext-tools"; then \
	  /bin/bash ../config/mkinstalldirs /tools_i486/share/gettext/po; \
	  for file in Makefile.in.in remove-potcdate.sin quot.sed boldquot.sed 
en...@qu... en...@bo... insert-header.sin Rules-quot 
Makevars.template; do \
	    /tools_i486/bin/install -c -m 644 ./$file \
			    /tools_i486/share/gettext/po/$file; \
	  done; \
	  for file in Makevars; do \
	    rm -f /tools_i486/share/gettext/po/$file; \
	  done; \
	else \
	  : ; \
	fi
make[3]: Leaving directory 
`/home/owes/svn/dev/trunk/build_i486/ipcop/usr/src/util-linux-2.24.1/po'
make[3]: Entering directory 
`/home/owes/svn/dev/trunk/build_i486/ipcop/usr/src/util-linux-2.24.1'
make[4]: Entering directory 
`/home/owes/svn/dev/trunk/build_i486/ipcop/usr/src/util-linux-2.24.1'
  /tools_i486/bin/mkdir -p '/tools_i486/share/doc/util-linux/getopt/'
  /tools_i486/bin/mkdir -p '/tools_i486/share/bash-completion/completions'
  /tools_i486/bin/install -c misc-utils/getopt-parse.bash 
misc-utils/getopt-parse.tcsh '/tools_i486/share/doc/util-linux/getopt/'
  /tools_i486/bin/mkdir -p '/tools_i486/share/man/man1'
  /tools_i486/bin/mkdir -p '/tools_i486/share/man/man5'
  /tools_i486/bin/mkdir -p '/tools_i486/share/man/man3'
  /tools_i486/bin/install -c -m 644 bash-completion/blkid 
bash-completion/cal bash-completion/col bash-completion/colcrt 
bash-completion/colrm bash-completion/column bash-completion/findmnt 
bash-completion/flock bash-completion/fsck.minix bash-completion/getopt 
bash-completion/hexdump bash-completion/ipcrm bash-completion/ipcs 
bash-completion/isosize bash-completion/logger bash-completion/look 
bash-completion/mcookie bash-completion/mkfs bash-completion/mkfs.minix 
bash-completion/mkswap bash-completion/namei bash-completion/prlimit 
bash-completion/readprofile bash-completion/renice bash-completion/rev 
bash-completion/script bash-completion/scriptreplay 
bash-completion/setsid bash-completion/tailf bash-completion/whereis 
bash-completion/wipefs bash-completion/mkfs.bfs 
bash-completion/swaplabel bash-completion/fdformat 
bash-completion/blockdev bash-completion/fdisk bash-completion/sfdisk 
bash-completion/cfdisk bash-completion/uuidgen bash-completion/lsblk 
'/tools_i486/share/bash-completion/completions'
  /tools_i486/bin/install -c -m 644 text-utils/col.1 text-utils/colcrt.1 
text-utils/colrm.1 text-utils/column.1 text-utils/hexdump.1 
text-utils/rev.1 text-utils/tailf.1 text-utils/pg.1 text-utils/ul.1 
text-utils/more.1 term-utils/script.1 term-utils/scriptreplay.1 
term-utils/setterm.1 sys-utils/flock.1 sys-utils/ipcmk.1 
sys-utils/ipcrm.1 sys-utils/ipcs.1 sys-utils/renice.1 sys-utils/setsid.1 
sys-utils/dmesg.1 sys-utils/prlimit.1 sys-utils/lscpu.1 
sys-utils/nsenter.1 misc-utils/cal.1 misc-utils/logger.1 
misc-utils/look.1 misc-utils/mcookie.1 misc-utils/namei.1 
misc-utils/whereis.1 misc-utils/uuidgen.1 misc-utils/getopt.1 
'/tools_i486/share/man/man1'
  /tools_i486/bin/mkdir -p '/tools_i486/share/man/man8'


... etc. no errors.


I'll do some toolchain (re-)building tomorrow or day after.


Olaf

Sorry, I'd tried that before, but re-tried again just in case. Didn't fix
it :(


On 21 April 2014 13:05, Olaf Westrik <wei...@ip...> wrote:

> On 2014-04-20 19:44, Eric Oberlander wrote:
>
>> make[3]: Leaving directory
>> `/home/eric/Documents/ipcop-svn/ipcop/trunk/build_i486/
>> ipcop/usr/src/util-linux-2.24.1/po'
>> make[3]: Entering directory
>> `/home/eric/Documents/ipcop-svn/ipcop/trunk/build_i486/
>> ipcop/usr/src/util-linux-2.24.1'
>> make[4]: Entering directory
>> `/home/eric/Documents/ipcop-svn/ipcop/trunk/build_i486/
>> ipcop/usr/src/util-linux-2.24.1'
>>   /tools_i486/bin/mkdir -p '/usr/share/bash-completion/completions'
>>   /tools_i486/bin/install -c -m 644 bash-completion/blkid
>> bash-completion/cal bash-completion/col bash-completion/colcrt
>> bash-completion/colrm bash-completion/column bash-completion/findmnt
>> bash-completion/flock bash-completion/fsck.minix bash-completion/getopt
>> bash-completion/hexdump bash-completion/ipcrm bash-completion/ipcs
>> bash-completion/isosize bash-completion/logger bash-completion/look
>> bash-completion/mcookie bash-completion/mkfs bash-completion/mkfs.minix
>> bash-completion/mkswap bash-completion/namei bash-completion/prlimit
>> bash-completion/readprofile bash-completion/renice bash-completion/rev
>> bash-completion/script bash-completion/scriptreplay
>> bash-completion/setsid bash-completion/tailf bash-completion/whereis
>> bash-completion/wipefs bash-completion/mkfs.bfs
>> bash-completion/swaplabel bash-completion/fdformat
>> bash-completion/blockdev bash-completion/fdisk bash-completion/sfdisk
>> bash-completion/cfdisk bash-completion/uuidgen bash-completion/lsblk
>> '/usr/share/bash-completion/completions'
>> /tools_i486/bin/install: cannot create regular file
>> '/usr/share/bash-completion/completions/blkid': Permission denied
>> /tools_i486/bin/install: cannot remove
>> '/usr/share/bash-completion/completions/cal': Permission denied
>> /tools_i486/bin/install: cannot create regular file
>> '/usr/share/bash-completion/completions/col': Permission denied
>> /tools_i486/bin/install: cannot create regular file
>>
>
> Very odd. The permissions, directories, etc. should be more or less
> identical no matter if it is i?86 or x86_64.
> Any problems with the sudo settings should have shown much, much earlier.
>
> Can you retry and first do: ./make.sh ccache_clean && ./make.sh clean
>
>
> Olaf
>

On 2014-04-20 19:44, Eric Oberlander wrote:
> make[3]: Leaving directory
> `/home/eric/Documents/ipcop-svn/ipcop/trunk/build_i486/ipcop/usr/src/util-linux-2.24.1/po'
> make[3]: Entering directory
> `/home/eric/Documents/ipcop-svn/ipcop/trunk/build_i486/ipcop/usr/src/util-linux-2.24.1'
> make[4]: Entering directory
> `/home/eric/Documents/ipcop-svn/ipcop/trunk/build_i486/ipcop/usr/src/util-linux-2.24.1'
>   /tools_i486/bin/mkdir -p '/usr/share/bash-completion/completions'
>   /tools_i486/bin/install -c -m 644 bash-completion/blkid
> bash-completion/cal bash-completion/col bash-completion/colcrt
> bash-completion/colrm bash-completion/column bash-completion/findmnt
> bash-completion/flock bash-completion/fsck.minix bash-completion/getopt
> bash-completion/hexdump bash-completion/ipcrm bash-completion/ipcs
> bash-completion/isosize bash-completion/logger bash-completion/look
> bash-completion/mcookie bash-completion/mkfs bash-completion/mkfs.minix
> bash-completion/mkswap bash-completion/namei bash-completion/prlimit
> bash-completion/readprofile bash-completion/renice bash-completion/rev
> bash-completion/script bash-completion/scriptreplay
> bash-completion/setsid bash-completion/tailf bash-completion/whereis
> bash-completion/wipefs bash-completion/mkfs.bfs
> bash-completion/swaplabel bash-completion/fdformat
> bash-completion/blockdev bash-completion/fdisk bash-completion/sfdisk
> bash-completion/cfdisk bash-completion/uuidgen bash-completion/lsblk
> '/usr/share/bash-completion/completions'
> /tools_i486/bin/install: cannot create regular file
> '/usr/share/bash-completion/completions/blkid': Permission denied
> /tools_i486/bin/install: cannot remove
> '/usr/share/bash-completion/completions/cal': Permission denied
> /tools_i486/bin/install: cannot create regular file
> '/usr/share/bash-completion/completions/col': Permission denied
> /tools_i486/bin/install: cannot create regular file

Very odd. The permissions, directories, etc. should be more or less 
identical no matter if it is i?86 or x86_64.
Any problems with the sudo settings should have shown much, much earlier.

Can you retry and first do: ./make.sh ccache_clean && ./make.sh clean


Olaf

Hi

make.sh requires to be run as sudo, so perhaps the sudo environment needs
to be extended, or more likely the man stuff to be removed?

Eric



On 20 April 2014 19:47, Michael Rasmussen <mi...@mi...> wrote:

> On Sun, 20 Apr 2014 18:44:21 +0100
> Eric Oberlander <eri...@gm...> wrote:
>
> > '/usr/share/bash-completion/completions'
> > /tools_i486/bin/install: cannot create regular file
> > '/usr/share/bash-completion/completions/blkid': Permission denied
> Shouldn't make run as either root or with sudo?
>
> --
> Hilsen/Regards
> Michael Rasmussen
>
> Get my public GnuPG keys:
> michael <at> rasmussen <dot> cc
> http://pgp.mit.edu:11371/pks/lookup?op=get&search=0xD3C9A00E
> mir <at> datanom <dot> net
> http://pgp.mit.edu:11371/pks/lookup?op=get&search=0xE501F51C
> mir <at> miras <dot> org
> http://pgp.mit.edu:11371/pks/lookup?op=get&search=0xE3E80917
> --------------------------------------------------------------
> /usr/games/fortune -es says:
> I am very fond of the company of ladies.  I like their beauty,
> I like their delicacy, I like their vivacity, and I like their silence.
>                 -- Samuel Johnson
>
>
> ------------------------------------------------------------------------------
> Learn Graph Databases - Download FREE O'Reilly Book
> "Graph Databases" is the definitive new guide to graph databases and their
> applications. Written by three acclaimed leaders in the field,
> this first edition is now available. Download your free book today!
> http://p.sf.net/sfu/NeoTech
> _______________________________________________
> IPCop-devel mailing list
> IPC...@li...
> https://lists.sourceforge.net/lists/listinfo/ipcop-devel
>
>

On Sun, 20 Apr 2014 18:44:21 +0100
Eric Oberlander <eri...@gm...> wrote:

> '/usr/share/bash-completion/completions'
> /tools_i486/bin/install: cannot create regular file
> '/usr/share/bash-completion/completions/blkid': Permission denied
Shouldn't make run as either root or with sudo?

-- 
Hilsen/Regards
Michael Rasmussen

Get my public GnuPG keys:
michael <at> rasmussen <dot> cc
http://pgp.mit.edu:11371/pks/lookup?op=get&search=0xD3C9A00E
mir <at> datanom <dot> net
http://pgp.mit.edu:11371/pks/lookup?op=get&search=0xE501F51C
mir <at> miras <dot> org
http://pgp.mit.edu:11371/pks/lookup?op=get&search=0xE3E80917
--------------------------------------------------------------
/usr/games/fortune -es says:
I am very fond of the company of ladies.  I like their beauty,
I like their delicacy, I like their vivacity, and I like their silence.
		-- Samuel Johnson

make[3]: Leaving directory
`/home/eric/Documents/ipcop-svn/ipcop/trunk/build_i486/ipcop/usr/src/util-linux-2.24.1/po'
make[3]: Entering directory
`/home/eric/Documents/ipcop-svn/ipcop/trunk/build_i486/ipcop/usr/src/util-linux-2.24.1'
make[4]: Entering directory
`/home/eric/Documents/ipcop-svn/ipcop/trunk/build_i486/ipcop/usr/src/util-linux-2.24.1'
 /tools_i486/bin/mkdir -p '/usr/share/bash-completion/completions'
 /tools_i486/bin/install -c -m 644 bash-completion/blkid
bash-completion/cal bash-completion/col bash-completion/colcrt
bash-completion/colrm bash-completion/column bash-completion/findmnt
bash-completion/flock bash-completion/fsck.minix bash-completion/getopt
bash-completion/hexdump bash-completion/ipcrm bash-completion/ipcs
bash-completion/isosize bash-completion/logger bash-completion/look
bash-completion/mcookie bash-completion/mkfs bash-completion/mkfs.minix
bash-completion/mkswap bash-completion/namei bash-completion/prlimit
bash-completion/readprofile bash-completion/renice bash-completion/rev
bash-completion/script bash-completion/scriptreplay bash-completion/setsid
bash-completion/tailf bash-completion/whereis bash-completion/wipefs
bash-completion/mkfs.bfs bash-completion/swaplabel bash-completion/fdformat
bash-completion/blockdev bash-completion/fdisk bash-completion/sfdisk
bash-completion/cfdisk bash-completion/uuidgen bash-completion/lsblk
'/usr/share/bash-completion/completions'
/tools_i486/bin/install: cannot create regular file
'/usr/share/bash-completion/completions/blkid': Permission denied
/tools_i486/bin/install: cannot remove
'/usr/share/bash-completion/completions/cal': Permission denied
/tools_i486/bin/install: cannot create regular file
'/usr/share/bash-completion/completions/col': Permission denied
/tools_i486/bin/install: cannot create regular file
'/usr/share/bash-completion/completions/colcrt': Permission denied
/tools_i486/bin/install: cannot create regular file
'/usr/share/bash-completion/completions/colrm': Permission denied
/tools_i486/bin/install: cannot create regular file
'/usr/share/bash-completion/completions/column': Permission denied
/tools_i486/bin/install: cannot create regular file
'/usr/share/bash-completion/completions/findmnt': Permission denied
/tools_i486/bin/install: cannot create regular file
'/usr/share/bash-completion/completions/flock': Permission denied
/tools_i486/bin/install: cannot create regular file
'/usr/share/bash-completion/completions/fsck.minix': Permission denied
/tools_i486/bin/install: cannot create regular file
'/usr/share/bash-completion/completions/getopt': Permission denied
/tools_i486/bin/install: cannot create regular file
'/usr/share/bash-completion/completions/hexdump': Permission denied
/tools_i486/bin/install: cannot create regular file
'/usr/share/bash-completion/completions/ipcrm': Permission denied
/tools_i486/bin/install: cannot create regular file
'/usr/share/bash-completion/completions/ipcs': Permission denied
/tools_i486/bin/install: cannot create regular file
'/usr/share/bash-completion/completions/isosize': Permission denied
/tools_i486/bin/install: cannot create regular file
'/usr/share/bash-completion/completions/logger': Permission denied
/tools_i486/bin/install: cannot remove
'/usr/share/bash-completion/completions/look': Permission denied
/tools_i486/bin/install: cannot create regular file
'/usr/share/bash-completion/completions/mcookie': Permission denied
/tools_i486/bin/install: cannot create regular file
'/usr/share/bash-completion/completions/mkfs': Permission denied
/tools_i486/bin/install: cannot create regular file
'/usr/share/bash-completion/completions/mkfs.minix': Permission denied
/tools_i486/bin/install: cannot create regular file
'/usr/share/bash-completion/completions/mkswap': Permission denied
/tools_i486/bin/install: cannot create regular file
'/usr/share/bash-completion/completions/namei': Permission denied
/tools_i486/bin/install: cannot create regular file
'/usr/share/bash-completion/completions/prlimit': Permission denied
/tools_i486/bin/install: cannot create regular file
'/usr/share/bash-completion/completions/readprofile': Permission denied
/tools_i486/bin/install: cannot remove
'/usr/share/bash-completion/completions/renice': Permission denied
/tools_i486/bin/install: cannot create regular file
'/usr/share/bash-completion/completions/rev': Permission denied
/tools_i486/bin/install: cannot create regular file
'/usr/share/bash-completion/completions/script': Permission denied
/tools_i486/bin/install: cannot create regular file
'/usr/share/bash-completion/completions/scriptreplay': Permission denied
/tools_i486/bin/install: cannot create regular file
'/usr/share/bash-completion/completions/setsid': Permission denied
/tools_i486/bin/install: cannot create regular file
'/usr/share/bash-completion/completions/tailf': Permission denied
/tools_i486/bin/install: cannot create regular file
'/usr/share/bash-completion/completions/whereis': Permission denied
/tools_i486/bin/install: cannot create regular file
'/usr/share/bash-completion/completions/wipefs': Permission denied
/tools_i486/bin/install: cannot create regular file
'/usr/share/bash-completion/completions/mkfs.bfs': Permission denied
/tools_i486/bin/install: cannot create regular file
'/usr/share/bash-completion/completions/swaplabel': Permission denied
/tools_i486/bin/install: cannot create regular file
'/usr/share/bash-completion/completions/fdformat': Permission denied
/tools_i486/bin/install: cannot create regular file
'/usr/share/bash-completion/completions/blockdev': Permission denied
/tools_i486/bin/install: cannot create regular file
'/usr/share/bash-completion/completions/fdisk': Permission denied
/tools_i486/bin/install: cannot create regular file
'/usr/share/bash-completion/completions/sfdisk': Permission denied
/tools_i486/bin/install: cannot create regular file
'/usr/share/bash-completion/completions/cfdisk': Permission denied
/tools_i486/bin/install: cannot create regular file
'/usr/share/bash-completion/completions/uuidgen': Permission denied
/tools_i486/bin/install: cannot create regular file
'/usr/share/bash-completion/completions/lsblk': Permission denied
make[4]: *** [install-dist_bashcompletionDATA] Error 1
make[4]: *** Waiting for unfinished jobs....
 /tools_i486/bin/mkdir -p '/tools_i486/share/doc/util-linux/getopt/'
 /tools_i486/bin/mkdir -p '/tools_i486/share/man/man1'
 /tools_i486/bin/install -c misc-utils/getopt-parse.bash
misc-utils/getopt-parse.tcsh '/tools_i486/share/doc/util-linux/getopt/'
 /tools_i486/bin/install -c -m 644 text-utils/col.1 text-utils/colcrt.1
text-utils/colrm.1 text-utils/column.1 text-utils/hexdump.1
text-utils/rev.1 text-utils/tailf.1 text-utils/pg.1 text-utils/ul.1
text-utils/more.1 term-utils/script.1 term-utils/scriptreplay.1
term-utils/setterm.1 sys-utils/flock.1 sys-utils/ipcmk.1 sys-utils/ipcrm.1
sys-utils/ipcs.1 sys-utils/renice.1 sys-utils/setsid.1 sys-utils/dmesg.1
sys-utils/prlimit.1 sys-utils/lscpu.1 sys-utils/nsenter.1 misc-utils/cal.1
misc-utils/logger.1 misc-utils/look.1 misc-utils/mcookie.1
misc-utils/namei.1 misc-utils/whereis.1 misc-utils/uuidgen.1
misc-utils/getopt.1 '/tools_i486/share/man/man1'
make[4]: Leaving directory
`/home/eric/Documents/ipcop-svn/ipcop/trunk/build_i486/ipcop/usr/src/util-linux-2.24.1'
make[3]: *** [install-am] Error 2
make[3]: Leaving directory
`/home/eric/Documents/ipcop-svn/ipcop/trunk/build_i486/ipcop/usr/src/util-linux-2.24.1'
make[2]: *** [install-recursive] Error 1
make[2]: Leaving directory
`/home/eric/Documents/ipcop-svn/ipcop/trunk/build_i486/ipcop/usr/src/util-linux-2.24.1'
make[1]: *** [install] Error 2
make[1]: Leaving directory
`/home/eric/Documents/ipcop-svn/ipcop/trunk/build_i486/ipcop/usr/src/util-linux-2.24.1'
make: ***
[/home/eric/Documents/ipcop-svn/ipcop/trunk/files_i486/01_toolchain/util-linux-2.24.1]
Error 2


On 20 April 2014 17:09, Olaf Westrik <wei...@ip...> wrote:

> On 2014-04-20 17:38, Eric Oberlander wrote:
>
>> util-linux is breaking my toolchain build, looks like it may be a
>> problem building man, but I can't see an obvious error.
>>
>
> Can you post the last 25-30 lines of the build log?
>
>
>
>  Unfortunately there's no i486 pre-built toolchain available yet to
>> bypass the problem...
>>
>
> That's probably because I'm using i686 only on my build box for some time
> now.
>
>
> Olaf
>

On 2014-04-20 17:38, Eric Oberlander wrote:
> util-linux is breaking my toolchain build, looks like it may be a
> problem building man, but I can't see an obvious error.

Can you post the last 25-30 lines of the build log?


> Unfortunately there's no i486 pre-built toolchain available yet to
> bypass the problem...

That's probably because I'm using i686 only on my build box for some 
time now.


Olaf

util-linux is breaking my toolchain build, looks like it may be a problem
building man, but I can't see an obvious error.

Unfortunately there's no i486 pre-built toolchain available yet to bypass
the problem...

Eric