gatos-devel Mailing List for GATOS

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Hay all,
I recently upgraded to xorg-x11 7 in my Gentoo
I am running kernel 2.6.17.
googling I found a post in freedesktop bugzilla , suggesting you may
know why xorg crashs with the ati open drivers.
last lines of /var/log/Xorg.0.log read:
(II) Module fi1236: vendor="X.Org Foundation"
        compiled for 7.0.0, module version = 1.0.0
        ABI class: X.Org Video Driver, version 0.8
(II) Loading sub module "tda9885"
(II) LoadModule: "tda9885"
(II) Loading /usr/lib/xorg/modules/multimedia/tda9885_drv.so
(II) Module tda9885: vendor="X.Org Foundation"
        compiled for 7.0.0, module version = 1.0.0
        ABI class: X.Org Video Driver, version 0.8
(II) RADEON(0): I2C device "Radeon multimedia bus:TDA9885 Alignment-free
IF-PLL" registered at address 0x86.

   *** If unresolved symbols were reported above, they might not
   *** be the reason for the server aborting.

Backtrace:
0: X(xf86SigHandler+0x86) [0x80b8a06]

Fatal server error:
Caught signal 11.  Server aborting

(**) RADEON(0): RADEONLeaveVT

after moving /usr/lib/xorg/modules/multimedia/tda9885_drv.so aside I can
boot fine.

I own a 8500 AIW and use xf86-video-ati version 6.5.8.0

Niv
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.4 (GNU/Linux)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org

iD8DBQFExqoNkwazfG0MmCYRAk0XAJ9otuh0jhAVs3LOCvCj22kWAKRxJQCfU6Vp
E3poQQgje4gxthTdRl+Fun4=
=YMKy
-----END PGP SIGNATURE-----

Hi, trying to make the km working with my card I fixed
some problems in KM, see patch attached. It makes use
of copy_to/from_user kernel functions when using the
proc_fs. The patch also adds the PCI ID for my card.

Regards,
Bogdan

__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com 

Hello,

there is a known problem with the gcc34 that deletes
the unused symbols from libraries in spite of its
optimisation. Also the newest ffmeped sources do not
match with the avview. The solution I used was to
retrieve ffmpeg-0.4.8 together with a patch for gcc34.
You'll find a patch that works in:
http://be.lunar-linux.org/lunar/patches/ffmpeg-0.4.8-gcc34.patch.bz2

Regards,
Bogdan


--- persall88 <per...@sb...> wrote:

> 
> As was suggested, I installed the libxv-dev package.
> 
> Then I changed the include file back to Xvlib.h,
> redid Avview configure, and 
> then tried make (Avview).  This time there was a
> compile problem that looked 
> like it had to do with ffmpeg. I was trying to use
> the new ffmpeg rev5591 
> from svn.
> 
> So I decided to revert back to the trusty old
> ffmpeg-0.4.8.
> For this I installed gcc-3.4. I changed the cc def
> in the ffmpeg configure
> to "cc=/usr/bin/gcc-3.4".  Then I did configure, and
> started make.
> 
> It was going along pretty well, and I thought I was
> in the clear,
> but then suddenly there were a bunch of compile
> errors and the make exited.
> The tail of those errors is here:
>     i386/dsputil_mmx.c:1494: undefined reference to
> `ff_pw_20'
>     i386/dsputil_mmx.c:1494: undefined reference to
> `ff_pw_3'
>     i386/dsputil_mmx.c:1494: undefined reference to
> `ff_pw_20'
>     i386/dsputil_mmx.c:1494: undefined reference to
> `ff_pw_3'
>     i386/dsputil_mmx.c:1494: undefined reference to
> `ff_pw_20'
>     i386/dsputil_mmx.c:1494: undefined reference to
> `ff_pw_3'
>     ./libavcodec/libavcodec.a(motion_est_mmx.o): In
> function `sad8_4_mmx2':
>     i386/motion_est_mmx.c:118: undefined reference
> to `bone'
>     i386/motion_est_mmx.c:118: undefined reference
> to `bone'
>     i386/motion_est_mmx.c:118: undefined reference
> to `bone'
>     ./libavcodec/libavcodec.a(simple_idct_mmx.o): In
> function 
> `ff_simple_idct_mmx':
>     i386/simple_idct_mmx.c:212: undefined reference
> to `wm1010'
>     i386/simple_idct_mmx.c:212: undefined reference
> to `d40000'
>     ./libavcodec/libavcodec.a(simple_idct_mmx.o): In
> function 
> `ff_simple_idct_put_mmx':
>     i386/simple_idct_mmx.c:212: undefined reference
> to `wm1010'
>     i386/simple_idct_mmx.c:212: undefined reference
> to `d40000'
>     ./libavcodec/libavcodec.a(simple_idct_mmx.o): In
> function 
> `ff_simple_idct_add_mmx':
>     i386/simple_idct_mmx.c:212: undefined reference
> to `wm1010'
>     i386/simple_idct_mmx.c:212: undefined reference
> to `d40000'
>     collect2: ld returned 1 exit status
>     make: *** [ffmpeg_g] Error 1
> Any ideas?
> 
> - per...@sb...
> 
> Using Tomcat but need to do more? Need to support
> web services, security?
> Get stuff done quickly with pre-integrated
> technology to make your job easier
> Download IBM WebSphere Application Server v.1.0.1
> based on Apache Geronimo
>
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
> _______________________________________________
> Gatos-devel mailing list
> Gat...@li...
>
https://lists.sourceforge.net/lists/listinfo/gatos-devel
> 


__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com 

Does anybody have a formula for making this thing work?
per...@sb...

Nathanael Nerode <neroden@...> writes:

> 
> Still can't get video-in to work on this card, and I believe I've been
> very thorough here; I've checked through mounds of websites and dealt with
> everything anyone's mentioned.  Is there a developer in the house?
> 
> I have Xorg 6.9.0.  I have the microcode file
> ativmc20.cod copied into the location 
> /usr/X11R6/lib/modules/multimedia/rt2_pmem.bin
> I have Linux kernel version 2.6.15.
> 
> I get a seemingly successful /var/log/Xorg.0.log.  Some highlights
> (I can attach the whole thing if someone will actually look at it,
> but if not I see no point in doing so):
> 
> [...]
>
> Lovely, except running xawtv gives me more of the same static.
> 
> I suspect after some examination that the GATOS list is dead.  The website
> is certainly.... confusing.  Therefore I have cc:ed this to
> xorg@... in hopes of better luck there.
> 
> Any ideas?  Please cc: me as I don't follow either list.


Well, actually, I have the exact same problem! 

I have: 
Radeon AIW 9000 Pro
Kernel 2.6.15
Xorg 7.1
Direct Rendering is working

The microcode seems to be loaded correctly (same as your xorg.log). However, the
tv-in is still not working.

If i find a solution, I'll let you know -- but i'm working time to time on this
problem for 3 months without any success.

Any suggestions folks?

Please cc: noway@(nospam)nowaysoft.com

As I mentioned previously, I had started trying to use
the new ffmpeg which I downloaded from the ffmpeg website
using svn, numbered version 5591. I had problems compiling that,
so I thought if I switched back to ffmpeg-0.4.8, it would compile
no problems and I could do on to the next thing. However, now I
have had problems compiling ffmpeg-0.4.8. In that case, should I
just go ahead and try to solve the (compile) problems with the new
ffmpeg? It seems to me that if I could get that working, it might
be an improvement over the old ffmpeg. What would you do, if you
were me?
- per...@sb...


----- Original Message -----
From: <gat...@li...>
To: <gat...@li...>
Sent: Thursday, July 06, 2006 12:07 PM
Subject: Gatos-devel Digest, Vol 2, Issue 6


> Send Gatos-devel mailing list submissions to
> gat...@li...
>
> To subscribe or unsubscribe via the World Wide Web, visit
> https://lists.sourceforge.net/lists/listinfo/gatos-devel
> or, via email, send a message with subject or body 'help' to
> gat...@li...
>
> You can reach the person managing the list at
> gat...@li...
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of Gatos-devel digest..."
>
>
> Today's Topics:
>
>    1. Re:  Avview 0.80.7 -- now ffmpeg-0.4.8 compile error (persall88)
>    2. Re:  Avview 0.80.7 -- now ffmpeg-0.4.8 compile error
>       (Antti Ajanki)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Wed, 5 Jul 2006 13:54:56 -0700
> From: persall88 <per...@sb...>
> Subject: Re: [GATOS] Avview 0.80.7 -- now ffmpeg-0.4.8 compile error
> To: gat...@li...
> Message-ID: <200...@sb...>
> Content-Type: text/plain;  charset="us-ascii"
>
>
> As was suggested, I installed the libxv-dev package.
>
> Then I changed the include file back to Xvlib.h, redid Avview configure,
and
> then tried make (Avview).  This time there was a compile problem that
looked
> like it had to do with ffmpeg. I was trying to use the new ffmpeg rev5591
> from svn.
>
> So I decided to revert back to the trusty old ffmpeg-0.4.8.
> For this I installed gcc-3.4. I changed the cc def in the ffmpeg configure
> to "cc=/usr/bin/gcc-3.4".  Then I did configure, and started make.
>
> It was going along pretty well, and I thought I was in the clear,
> but then suddenly there were a bunch of compile errors and the make
exited.
> The tail of those errors is here:
>     i386/dsputil_mmx.c:1494: undefined reference to `ff_pw_20'
>     i386/dsputil_mmx.c:1494: undefined reference to `ff_pw_3'
>     i386/dsputil_mmx.c:1494: undefined reference to `ff_pw_20'
>     i386/dsputil_mmx.c:1494: undefined reference to `ff_pw_3'
>     i386/dsputil_mmx.c:1494: undefined reference to `ff_pw_20'
>     i386/dsputil_mmx.c:1494: undefined reference to `ff_pw_3'
>     ./libavcodec/libavcodec.a(motion_est_mmx.o): In function
`sad8_4_mmx2':
>     i386/motion_est_mmx.c:118: undefined reference to `bone'
>     i386/motion_est_mmx.c:118: undefined reference to `bone'
>     i386/motion_est_mmx.c:118: undefined reference to `bone'
>     ./libavcodec/libavcodec.a(simple_idct_mmx.o): In function
> `ff_simple_idct_mmx':
>     i386/simple_idct_mmx.c:212: undefined reference to `wm1010'
>     i386/simple_idct_mmx.c:212: undefined reference to `d40000'
>     ./libavcodec/libavcodec.a(simple_idct_mmx.o): In function
> `ff_simple_idct_put_mmx':
>     i386/simple_idct_mmx.c:212: undefined reference to `wm1010'
>     i386/simple_idct_mmx.c:212: undefined reference to `d40000'
>     ./libavcodec/libavcodec.a(simple_idct_mmx.o): In function
> `ff_simple_idct_add_mmx':
>     i386/simple_idct_mmx.c:212: undefined reference to `wm1010'
>     i386/simple_idct_mmx.c:212: undefined reference to `d40000'
>     collect2: ld returned 1 exit status
>     make: *** [ffmpeg_g] Error 1
> Any ideas?
>
> - per...@sb...
>
>
>
> ------------------------------
>
> Message: 2
> Date: Thu, 6 Jul 2006 15:38:31 +0300 (EEST)
> From: Antti Ajanki <aa...@cc...>
> Subject: Re: [GATOS] Avview 0.80.7 -- now ffmpeg-0.4.8 compile error
> To: gat...@li...
> Message-ID: <Pin...@mi...>
> Content-Type: TEXT/PLAIN; charset=US-ASCII; format=flowed
>
> On Wed, 5 Jul 2006, persall88 wrote:
>
> > So I decided to revert back to the trusty old ffmpeg-0.4.8.
> > For this I installed gcc-3.4. I changed the cc def in the ffmpeg
configure
> > to "cc=/usr/bin/gcc-3.4".  Then I did configure, and started make.
> >
> >
> > It was going along pretty well, and I thought I was in the clear,
> > but then suddenly there were a bunch of compile errors and the make
exited.
> > The tail of those errors is here:
> >    i386/dsputil_mmx.c:1494: undefined reference to `ff_pw_20'
> >    i386/dsputil_mmx.c:1494: undefined reference to `ff_pw_3'
>
> It would be helpful to known what was the first error message, but this
> might indicate that you are missing another *.h file.
>
> Use apt-file to search for correct package to install after you have
> figured the name of the missing *.h from the error messages.
>
> --
> Antti Ajanki
>
>
>
> ------------------------------
>
> Using Tomcat but need to do more? Need to support web services, security?
> Get stuff done quickly with pre-integrated technology to make your job
easier
> Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
> http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
>
> ------------------------------
>
> _______________________________________________
> Gatos-devel mailing list
> Gat...@li...
> https://lists.sourceforge.net/lists/listinfo/gatos-devel
>
>
> End of Gatos-devel Digest, Vol 2, Issue 6
> *****************************************

On Wed, 5 Jul 2006, persall88 wrote:

> So I decided to revert back to the trusty old ffmpeg-0.4.8.
> For this I installed gcc-3.4. I changed the cc def in the ffmpeg configure
> to "cc=/usr/bin/gcc-3.4".  Then I did configure, and started make.
>
>
> It was going along pretty well, and I thought I was in the clear,
> but then suddenly there were a bunch of compile errors and the make exited.
> The tail of those errors is here:
>    i386/dsputil_mmx.c:1494: undefined reference to `ff_pw_20'
>    i386/dsputil_mmx.c:1494: undefined reference to `ff_pw_3'

It would be helpful to known what was the first error message, but this 
might indicate that you are missing another *.h file.

Use apt-file to search for correct package to install after you have 
figured the name of the missing *.h from the error messages.

-- 
Antti Ajanki

As was suggested, I installed the libxv-dev package.

Then I changed the include file back to Xvlib.h, redid Avview configure, and 
then tried make (Avview).  This time there was a compile problem that looked 
like it had to do with ffmpeg. I was trying to use the new ffmpeg rev5591 
from svn.

So I decided to revert back to the trusty old ffmpeg-0.4.8.
For this I installed gcc-3.4. I changed the cc def in the ffmpeg configure
to "cc=/usr/bin/gcc-3.4".  Then I did configure, and started make.

It was going along pretty well, and I thought I was in the clear,
but then suddenly there were a bunch of compile errors and the make exited.
The tail of those errors is here:
    i386/dsputil_mmx.c:1494: undefined reference to `ff_pw_20'
    i386/dsputil_mmx.c:1494: undefined reference to `ff_pw_3'
    i386/dsputil_mmx.c:1494: undefined reference to `ff_pw_20'
    i386/dsputil_mmx.c:1494: undefined reference to `ff_pw_3'
    i386/dsputil_mmx.c:1494: undefined reference to `ff_pw_20'
    i386/dsputil_mmx.c:1494: undefined reference to `ff_pw_3'
    ./libavcodec/libavcodec.a(motion_est_mmx.o): In function `sad8_4_mmx2':
    i386/motion_est_mmx.c:118: undefined reference to `bone'
    i386/motion_est_mmx.c:118: undefined reference to `bone'
    i386/motion_est_mmx.c:118: undefined reference to `bone'
    ./libavcodec/libavcodec.a(simple_idct_mmx.o): In function 
`ff_simple_idct_mmx':
    i386/simple_idct_mmx.c:212: undefined reference to `wm1010'
    i386/simple_idct_mmx.c:212: undefined reference to `d40000'
    ./libavcodec/libavcodec.a(simple_idct_mmx.o): In function 
`ff_simple_idct_put_mmx':
    i386/simple_idct_mmx.c:212: undefined reference to `wm1010'
    i386/simple_idct_mmx.c:212: undefined reference to `d40000'
    ./libavcodec/libavcodec.a(simple_idct_mmx.o): In function 
`ff_simple_idct_add_mmx':
    i386/simple_idct_mmx.c:212: undefined reference to `wm1010'
    i386/simple_idct_mmx.c:212: undefined reference to `d40000'
    collect2: ld returned 1 exit status
    make: *** [ffmpeg_g] Error 1
Any ideas?

- per...@sb...

On Tue, 4 Jul 2006, persall88 wrote:

> At first I was getting this error:
>     xv.c:24:34: error: X11/extensions/Xvlib.h: No such file or directory
> Then I noticed that on this system there really is no such file.

Install "libxv-dev" package.

-- 
Antti Ajanki

Dnia wtorek, 4 lipca 2006 16:57, Antti Ajanki napisa=B3:
> AFAIK the errors avview prints out are non-fatal, i.e. it should work
> anyway.
>
> > Initializing LIRC.
> > avview: could not connect to socket
> > avview: No such file or directory
> > Can't initialize LIRC: error opening socket.
>
> These just means that it didn't find remote control.
I don't have lirc


> > v4l device does not support YUV422
> > Device "Labtec Webcam Pro" located at "/dev/video1" does not support any
> > format AVview understands.
>
> This denotes that avview can't capture from your webcam, but that's just
> capture. Viewing TV should be possible even if no capture devices are
> found. Besides, the next line probably means that it did find the km
I disconnect my webcam and run avview again
=2D no picture

 - important information - mayby
=2D--------------------------------
changes in km.c  ( thanks!  Marcin ) made by Marcin ( developer gatos )
=2D my radeon not supported by Gatos :(
=2D-----------------------------------------
#ifndef PCI_DEVICE_ID_ATI_RADEON_RD
#define PCI_DEVICE_ID_ATI_RADEON_RD 0x5147
#endif

#ifndef PCI_DEVICE_ID_ATI_RADEON_RV <-- add
#define PCI_DEVICE_ID_ATI_RADEON_RV 0x5961 <-- add
#endif <-- add

/*-------------------------------------------------------------------------=
*/
    /* Radeons */
        {PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RADEON_RD,
         PCI_ANY_ID, PCI_ANY_ID, 0, 0, HARDWARE_RADEON},
        {PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RADEON_RV, <-- add
         PCI_ANY_ID, PCI_ANY_ID, 0, 0, HARDWARE_RADEON}, <-- add
    /* Radeon200 i.e. 8500 */
=2D---------
$ start_avview
libzvbi available export modules:
        HTML:keyword "html" mimetype "text/html" extension "html,htm"
        PNG:keyword "png" mimetype "image/png" extension "png"
        PPM:keyword "ppm" mimetype "image/x-portable-pixmap" extension "ppm"
        Text:keyword "text" mimetype "text/plain" extension "txt"
        VTX:keyword "vtx" mimetype "application/videotext" extension "vtx"
Initializing LIRC.
avview: could not connect to socket
avview: No such file or directory
Can't initialize LIRC: error opening socket.
NUM_ADAPTORS=3D1
Adaptor 0: ATI Radeon Video Overlay
                type input video image
                ports 73
73 ATI Radeon Video Overlay
master=3D.controlwin row=3D1 column=3D0
Looking for km device that corresponds to PCI:01:00.0
km_devs=3Dcontrol0
read line=3D+STATUS
read line=3DDEVICE_ID=3D0000:01:00.0
read line=3DLOCATION_ID=3DPCI:0000:01:00.0
read line=3DINSTANCE_ID=3DKM_DEVICE:0
read line=3DVSYNC_COUNT=3D40598
read line=3DVBLANK_COUNT=3D0
read line=3DVLINE_COUNT=3D1
read line=3DV4L_DEVICE=3D0
read line=3DVIDEO_STREAM_ACTIVE=3D0
read line=3DVIDEO_STREAM_DATA_UNIT=3D4294967295
read line=3DVIDEO_STREAM_INFO_DATA_UNIT=3D4294967295
read line=3DVBI_DEVICE=3D224
read line=3DVBI_STREAM_DATA_UNIT=3D4294967295
read line=3DVBI_STREAM_INFO_DATA_UNIT=3D4294967295
read line=3DVBI_STREAM_ACTIVE=3D0
read line=3D+END_STATUS
master=3D.controlwin row=3D1 column=3D0
Current picture parameters: depth=3D16 palette=3D7
Current picture parameters: depth=3D16 palette=3D7
=2D------------
dmesg
=2D-----------
Kmultimedia API module version alpha-6.0 loaded
Kmultimedia module version alpha-6.0 loaded
Page size is 4096 sizeof(bm_list_descriptor)=3D16 sizeof(KM_STRUCT)=3D732
km: probing 0000:01:00.0
ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -=
>=20
IRQ 11
km: using irq 11
Register aperture is 0xe9000000 0x00010000
kms variables: reg_aperture=3D0xd0ea0000
km: DMA_GUI_STATUS=3D0x00000002 entries=3D2
sizeof(kmfl_template)=3D780 sizeof(KM_FIELD)=3D52
Device 0000:01:00.0 (0x1002:0x5961) corresponds to /dev/video0
kms variables: reg_aperture=3Dd0ea0000
=2D-------------
after run avview
=2D-----------------
dmesg
=2D----------
lag=3D0x80000001
km: GUI_DMA queue (size=3D10) is full first=3D1 last=3D0 flag=3D0x80000001
=2D----cut 231 lines - the same -----------------------------------
km: GUI_DMA queue (size=3D10) is full first=3D1 last=3D0 flag=3D0x80000001
Stopping GUIDMA queue
km: GUI_DMA_QUEUE abort stalled
km: closed stream, 260 buffers captured
Purging transfer queue
=2D---------------

> Which version of X.org are you using? 6.9.0 or newer is recommended.
=2D xorg-6.9.0-54.pclo2005.mde
=2D Build Date: Saturday 13 may 2006 22:53:21
=2D Packager    : Thac&Z=E9 <md...@dj...>

> Also,=20
> check Xorg.log for errors.
=2D no errors

Antti Ajanki - thanks for You help and more please
regards

At first I was getting this error:
     xv.c:24:34: error: X11/extensions/Xvlib.h: No such file or directory
Then I noticed that on this system there really is no such file.
But there is a file X11/extensions/Xvproto.h. So I changed the include
in Avview xv.c to include Xvproto.h. But I still get a bunch of errors,
starting out like this:
xv.c: In function =E2=80=98xv_numadaptors=E2=80=99:
xv.c:39: error: =E2=80=98XvAdaptorInfo=E2=80=99 undeclared (first use in th=
is function)
xv.c:39: error: (Each undeclared identifier is reported only once
xv.c:39: error: for each function it appears in.)
xv.c:39: error: =E2=80=98xvi=E2=80=99 undeclared (first use in this functio=
n)
xv.c:64: warning: implicit declaration of function =E2=80=98XvQueryAdaptors=
=E2=80=99
xv.c:68: warning: implicit declaration of function =E2=80=98XvFreeAdaptorIn=
fo=E2=80=99
xv.c: In function =E2=80=98xv_adaptor_name=E2=80=99:
xv.c:80: error: =E2=80=98XvAdaptorInfo=E2=80=99 undeclared (first use in th=
is function)
xv.c:80: error: =E2=80=98xvi=E2=80=99 undeclared (first use in this functio=
n)
xv.c: In function =E2=80=98xv_adaptor_type=E2=80=99:
xv.c:127: error: =E2=80=98XvAdaptorInfo=E2=80=99 undeclared (first use in t=
his function)
xv.c:127: error: =E2=80=98xvi=E2=80=99 undeclared (first use in this functi=
on)
xv.c:163: error: =E2=80=98XvInputMask=E2=80=99 undeclared (first use in thi=
s function)
=2E.. and so on -- many more.
Is there a different Avview version to use with Xorg?
=2D persall88

On Mon, 3 Jul 2006, qla wrote:

> Dnia poniedziaBek, 3 lipca 2006 19:23, Antti Ajanki napisaB:
>
>> MODULE_PARM macro was removed in kernel 2.6.17. I commited a fix for this
>> a minute ago, it may take an hour or so to be available on cvs.
>
> now ok - thanks - but I have next problem:
>
> I can't see picture in avview :

AFAIK the errors avview prints out are non-fatal, i.e. it should work 
anyway.

> Initializing LIRC.
> avview: could not connect to socket
> avview: No such file or directory
> Can't initialize LIRC: error opening socket.

These just means that it didn't find remote control.

> v4l device does not support YUV422
> Device "Labtec Webcam Pro" located at "/dev/video1" does not support any
> format AVview understands.

This denotes that avview can't capture from your webcam, but that's just 
capture. Viewing TV should be possible even if no capture devices are 
found. Besides, the next line probably means that it did find the km 
device:

> Current picture parameters: depth=16 palette=7

> Can You help me or someone ?

Which version of X.org are you using? 6.9.0 or newer is recommended. Also, 
check Xorg.log for errors.

-- 
Antti Ajanki

Dnia poniedzia=B3ek, 3 lipca 2006 19:23, Antti Ajanki napisa=B3:

> MODULE_PARM macro was removed in kernel 2.6.17. I commited a fix for this
> a minute ago, it may take an hour or so to be available on cvs.

now ok - thanks - but I have next problem:

I can't see picture in avview :
=2D-------------------------------------------
$ start_avview

libzvbi available export modules:
        HTML:keyword "html" mimetype "text/html" extension "html,htm"
        PNG:keyword "png" mimetype "image/png" extension "png"
        PPM:keyword "ppm" mimetype "image/x-portable-pixmap" extension "ppm"
        Text:keyword "text" mimetype "text/plain" extension "txt"
        VTX:keyword "vtx" mimetype "application/videotext" extension "vtx"
Initializing LIRC.
avview: could not connect to socket
avview: No such file or directory
Can't initialize LIRC: error opening socket.
NUM_ADAPTORS=3D1
Adaptor 0: ATI Radeon Video Overlay
                type input video image
                ports 73
73 ATI Radeon Video Overlay
master=3D.controlwin row=3D1 column=3D0
Looking for km device that corresponds to PCI:01:00.0
km_devs=3Dcontrol0
read line=3D+STATUS
read line=3DDEVICE_ID=3D0000:01:00.0
read line=3DLOCATION_ID=3DPCI:0000:01:00.0
read line=3DINSTANCE_ID=3DKM_DEVICE:0
read line=3DVSYNC_COUNT=3D26699
read line=3DVBLANK_COUNT=3D27072
read line=3DVLINE_COUNT=3D1
read line=3DV4L_DEVICE=3D0
read line=3DVIDEO_STREAM_ACTIVE=3D0
read line=3DVIDEO_STREAM_DATA_UNIT=3D4294967295
read line=3DVIDEO_STREAM_INFO_DATA_UNIT=3D4294967295
read line=3DVBI_DEVICE=3D224
read line=3DVBI_STREAM_DATA_UNIT=3D4294967295
read line=3DVBI_STREAM_INFO_DATA_UNIT=3D4294967295
read line=3DVBI_STREAM_ACTIVE=3D0
read line=3D+END_STATUS
master=3D.controlwin row=3D1 column=3D0
Current picture parameters: depth=3D16 palette=3D7
Current picture parameters: depth=3D24 palette=3D4
v4l device does not support YUV422
Device "Labtec Webcam Pro" located at "/dev/video1" does not support any=20
format AVview understands.
Current picture parameters: depth=3D16 palette=3D7
$=20
=2D--------------------------------------------------

Can You help me or someone ?

On Mon, 3 Jul 2006, qla wrote:

> Hi all
>
> km - cvs - 03.07.2006
>
> I have kernel 2.6.17 with ck1 ( normal ) patch
> http://members.optusnet.com.au/ckolivas/kernel/
> ---------------------------------------------------------------------------
>
[error message snipped]
>
> ----------------------------------------------------
>
> how to fix this error ? - help please

MODULE_PARM macro was removed in kernel 2.6.17. I commited a fix for this 
a minute ago, it may take an hour or so to be available on cvs.

-- 
Antti Ajanki

You can look for this file ativmc20.cod

-----Mensagem original-----
De: gat...@li...
[mailto:gat...@li...] Em nome de persall88
Enviada em: domingo, 2 de julho de 2006 21:03
Para: gat...@li...
Cc: vo...@mi...
Assunto: Re: [GATOS] ATI Radeon 9600 and Gatos

I looked on the ATI install CD, and there are hundreds of files,
and I have no idea which file(s) are the "microcode", or what
I should be looking for there. Sorry :)
Can someone give me a hint?
- per...@sb...


----- Original Message -----
From: <gat...@li...>
To: <gat...@li...>
Sent: Sunday, July 02, 2006 12:05 PM
search for ativmc20.cod and rename it to rt2_pmem.bin.

> Send Gatos-devel mailing list submissions to
> gat...@li...
>
> To subscribe or unsubscribe via the World Wide Web, visit
> https://lists.sourceforge.net/lists/listinfo/gatos-devel
> or, via email, send a message with subject or body 'help' to
> gat...@li...
>
> You can reach the person managing the list at
> gat...@li...
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of Gatos-devel digest..."
>
>
> Today's Topics:
>
>    1.  ATI Radeon 9600 and Gatos (persall88)
>    2. Re:  ATI Radeon 9600 and Gatos (Antti Ajanki)
>    3. Re:  ATI Radeon 9600 and Gatos (Vladimir Dergachev)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Sat, 1 Jul 2006 23:07:37 -0700
> From: persall88 <per...@sb...>
> Subject: [GATOS] ATI Radeon 9600 and Gatos
> To: gat...@li...
> Cc: vo...@mi..., cla...@ba...
> Message-ID: <200...@sb...>
> Content-Type: text/plain;  charset=3D"utf-8"
>
>
> I took some advice from the gatos-devel mailing list, and upgraded
> my Debian 3.1 Sarge to the new Debian Testing version called Etch
> (this uses kernel 2.6.15-1-486), and proceeded to try to get the Gatos
> packages to work on this ATI Radeon 9600.  I finally got stuck on
> the compile of km.  Here is what I did, up to this point.
> Perhaps someone could help me figure out what to do next.
>
> I downloaded and installed linux-kernel-headers-2.6.15-1-486 and
> linux-source-2.6.15, also Debian pkgs.
> Then I downloaded and installed ATI.4.4.0: X.org 6.7.0 driver from
Gatos.
>
> Then I tried compiling km-0.6.1.
> I got this error:
>   /usr/src/km/km.c:1026: error: ?PCI_DEVICE_ID_ATI_RADEON_LE?
undeclared
here
>    (not in a function)
>   /usr/src/km/km.c:1028: error: ?PCI_DEVICE_ID_ATI_RADEON_LF?
undeclared
here
>    (not in a function)
>
> So then I looked up the following info from various spots in the
> Xorg.0.logfile
>   ATI Radeon 9600 AP (AGP),
>   (II) Primary Device is: PCI 01:00:0
>   (II) ATI:  Candidate "Device" section "ATI Technologies, Inc. RV350
AP
>      [Radeon  9600]".
>   (WW) RADEON: No matching Device section for instance (BusID
PCI:1:0:1)
found
>   (--) Chipset ATI Radeon 9600 AP (AGP) found
>   (--) RADEON(0): Chipset: "ATI Radeon 9600 AP (AGP)" (ChipID =3D
0x4150)
>   (II) RADEON(0): Detected Rage Theatre as device 1 on VIP bus with id
> 0x4d4a1002
>   (II) RADEON(0): Detected Rage Theatre revision 00000001
>   (II) RADEON(0): Microcode: Use default microcode type: BINARY
>   (EE) RADEON(0): Microcode: cannot load microcode
>   (II) RADEON(0): Rage Theatre disabled
>   (II) PCI: 01:00:0: chip 1002,4150 card 1002,4722 rev 00 class
03,00,00
hdr
> 80
>   (II) PCI: 01:00:1: chip 1002,4170 card 1002,4723 rev 00 class
03,80,00
hdr
> 00
>
> Then I edited km.c and modified the defines and the table
>   static struct pci_device_id km_pci_tbl [].
> I added the following 2 defines to the list:
>   #ifndef PCI_DEVICE_ID_ATI_RADEON_AP
>   #define PCI_DEVICE_ID_ATI_RADEON_AP    0x4150
>   #endif
>   #ifndef PCI_DEVICE_ID_ATI_RADEON_AP2
>   #define PCI_DEVICE_ID_ATI_RADEON_AP2    0x4170
>   #endif
>
> And I removed most of the entries from the struct, adding the
> following 2 for my ATI Radeon 9600:
>   {PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RADEON_AP,
>     PCI_ANY_ID, PCI_ANY_ID, 0, 0, HARDWARE_RADEON},
>   {PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RADEON_AP2,
>     PCI_ANY_ID, PCI_ANY_ID, 0, 0, HARDWARE_RADEON},
> Then I was able to compile km.
>
> Then it was time to compile ffmpeg-0.4.8.
> However now I got an error that I don't know how to fix.
>    Compile error:
>      In file included from avcodec.h:14,
>           from common.c:27:
>      common.h:66: error: array type has incomplete element type
>      common.h:70: error: array type has incomplete element type
>      make[1]: *** [common.o] Error 1
>      make[1]: Leaving directory `/usr/src/ffmpeg-0.4.8/libavcodec'
>
> In ffmpeg subdir libavcodec file common.h lines 64-70
> are the following:
>    struct AVOption;
>    #ifdef HAVE_MMX
>    extern const struct AVOption avoptions_common[3 + 5];
>    #else
>    extern const struct AVOption avoptions_common[3];
>    #endif
>    extern const struct AVOption avoptions_workaround_bug[11];
>
> Can I fix this somehow? Add some other "workaround"?
> Perhaps I need a newer ffmpeg, but it has to have the source code.
> At the ffmpeg website, you need something called "svn" which I
> don't know what it is, and even if I did, I don't know if it's
> going to work with Avview or not.
> Can anyone help me get past this block?
>
> - per...@sb...
>
>
>
>
>
> ------------------------------
>
> Message: 2
> Date: Sun, 2 Jul 2006 10:13:02 +0300 (EEST)
> From: Antti Ajanki <aa...@cc...>
> Subject: Re: [GATOS] ATI Radeon 9600 and Gatos
> To: gat...@li...
> Message-ID: <Pin...@dv...>
> Content-Type: TEXT/PLAIN; charset=3DUS-ASCII; format=3Dflowed
>
> On Sat, 1 Jul 2006, persall88 wrote:
>
> >
> > I took some advice from the gatos-devel mailing list, and upgraded
> > my Debian 3.1 Sarge to the new Debian Testing version called Etch
> > (this uses kernel 2.6.15-1-486), and proceeded to try to get the
Gatos
> > packages to work on this ATI Radeon 9600.  I finally got stuck on
> > the compile of km.  Here is what I did, up to this point.
> > Perhaps someone could help me figure out what to do next.
> >
> > I downloaded and installed linux-kernel-headers-2.6.15-1-486 and
> > linux-source-2.6.15, also Debian pkgs.
> > Then I downloaded and installed ATI.4.4.0: X.org 6.7.0 driver from
Gatos.
>
> According to <http://packages.qa.debian.org/x/xorg.html> Debian
Testing
> has X.org 7.0. It already includes Gatos code, so you don't need to
> install ATI drivers from the Gatos site (but you still need km for
capture).
>
> > Then it was time to compile ffmpeg-0.4.8.
> > However now I got an error that I don't know how to fix.
> >   Compile error:
> >     In file included from avcodec.h:14,
> >          from common.c:27:
> >     common.h:66: error: array type has incomplete element type
> >     common.h:70: error: array type has incomplete element type
> >     make[1]: *** [common.o] Error 1
> >     make[1]: Leaving directory `/usr/src/ffmpeg-0.4.8/libavcodec'
>
> Google reveals (http://gcc.gnu.org/ml/gcc/2005-02/msg00053.html) that
> recent gcc versions don't accept definitions of type "extern struct
bla
> array[];"
>
> You have three options:
>
> 1) Use older gcc. Versions prior to 4.0 (?) do compile it OK.
>
> 2) Fix ffmpeg-0.4.8. <http://gcc.gnu.org/ml/gcc/2005-02/msg00067.html>
> gives a possible workaround.
>
> 3) Port Avview to use current ffmpeg (which hopefully has fixed the
> issue). Like I said, I once tried this but it wasn't trivial. OTOH, if
you
> succeed, the result would be much appreciated ;)
>
> > At the ffmpeg website, you need something called "svn" which I
> > don't know what it is, and even if I did, I don't know if it's
> > going to work with Avview or not.
>
> svn is a version control system, similar to cvs. If you have ever
> downloaded source codes with cvs, using svn is a piece of cake.
>
> --
> Antti Ajanki
>
>
>
> ------------------------------
>
> Message: 3
> Date: Sun, 2 Jul 2006 10:03:43 -0400 (EDT)
> From: Vladimir Dergachev <vo...@mi...>
> Subject: Re: [GATOS] ATI Radeon 9600 and Gatos
> To: persall88 <per...@sb...>
> Cc: gat...@li...,
> cla...@ba...
> Message-ID: <Pin...@no...>
> Content-Type: TEXT/PLAIN; charset=3DUS-ASCII; format=3Dflowed
>
>
>
>    (--) RADEON(0): Chipset: "ATI Radeon 9600 AP (AGP)" (ChipID =3D
0x4150)
>    (II) RADEON(0): Detected Rage Theatre as device 1 on VIP bus with
id
> 0x4d4a1002
>    (II) RADEON(0): Detected Rage Theatre revision 00000001
>    (II) RADEON(0): Microcode: Use default microcode type: BINARY
>    (EE) RADEON(0): Microcode: cannot load microcode
>       ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
>
> This is a problem you need to fix - Rage Theatre 200 requires a
microcode
> file which can be found someplace on driver CD.
>
>                    best
>
>                         Vladimir Dergachev
>
>
>
> ------------------------------
>
> Using Tomcat but need to do more? Need to support web services,
security?
> Get stuff done quickly with pre-integrated technology to make your job
easier
> Download IBM WebSphere Application Server v.1.0.1 based on Apache
Geronimo
>
http://sel.as-us.falkag.net/sel?cmd=3Dlnk&kid=3D120709&bid=3D263057&dat=3D=
121642
>
> ------------------------------
>
> _______________________________________________
> Gatos-devel mailing list
> Gat...@li...
> https://lists.sourceforge.net/lists/listinfo/gatos-devel
>
>
> End of Gatos-devel Digest, Vol 2, Issue 2
> *****************************************


Using Tomcat but need to do more? Need to support web services,
security?
Get stuff done quickly with pre-integrated technology to make your job
easier
Download IBM WebSphere Application Server v.1.0.1 based on Apache
Geronimo
http://sel.as-us.falkag.net/sel?cmd=3Dlnk&kid=3D120709&bid=3D263057&dat=3D=
121642
_______________________________________________
Gatos-devel mailing list
Gat...@li...
https://lists.sourceforge.net/lists/listinfo/gatos-devel

E-mail classificado pelo Identificador de Spam Inteligente Terra.
Para alterar a categoria classificada, visite
http://mail.terra.com.br/protected_email/imail/imail.cgi?+_u=3Dclaudinei.=
c
amargo&_l=3D1,1151884956.155745.26853.vacoas.hst.terra.com.br,13237,Des15=
,
Des15

Esta mensagem foi verificada pelo E-mail Protegido Terra.
Scan engine: McAfee VirusScan / Atualizado em 30/06/2006 / Vers=E3o:
4.4.00/4797
Proteja o seu e-mail Terra: http://mail.terra.com.br/

Hi all

km - cvs - 03.07.2006

I have kernel 2.6.17 with ck1 ( normal ) patch
http://members.optusnet.com.au/ckolivas/kernel/
=2D------------------------------------------------------------------------=
=2D-

[qla@lokal km]$ mv Makefile-2.6 Makefile
[qla@lokal km]$ make
make -C /lib/modules/2.6.17-ck1.1/build M=3D/home/qla/RPM/SOURCES/km modules
make[1]: Entering directory `/usr/src/linux-2.6.17-ck1.1'
  CC [M]  /home/qla/RPM/SOURCES/km/km_api.o
  CC [M]  /home/qla/RPM/SOURCES/km/km_api_data.o
  CC [M]  /home/qla/RPM/SOURCES/km/km_memory.o
  CC [M]  /home/qla/RPM/SOURCES/km/km.o
/home/qla/RPM/SOURCES/km/km.c:51: error: syntax error before string constant
/home/qla/RPM/SOURCES/km/km.c:51: warning: type defaults to `int' in=20
declaration of `MODULE_PARM'
/home/qla/RPM/SOURCES/km/km.c:51: warning: function declaration isn't a=20
prototype
/home/qla/RPM/SOURCES/km/km.c:51: warning: data definition has no type or=20
storage class
/home/qla/RPM/SOURCES/km/km.c:52: error: syntax error before string constant
/home/qla/RPM/SOURCES/km/km.c:52: warning: type defaults to `int' in=20
declaration of `MODULE_PARM'
/home/qla/RPM/SOURCES/km/km.c:52: warning: function declaration isn't a=20
prototype
/home/qla/RPM/SOURCES/km/km.c:52: warning: data definition has no type or=20
storage class
/home/qla/RPM/SOURCES/km/km.c:53: error: syntax error before string constant
/home/qla/RPM/SOURCES/km/km.c:53: warning: type defaults to `int' in=20
declaration of `MODULE_PARM'
/home/qla/RPM/SOURCES/km/km.c:53: warning: function declaration isn't a=20
prototype
/home/qla/RPM/SOURCES/km/km.c:53: warning: data definition has no type or=20
storage class
make[2]: *** [/home/qla/RPM/SOURCES/km/km.o] B=B3=B1d 1
make[1]: *** [_module_/home/qla/RPM/SOURCES/km] B=B3=B1d 2
make[1]: Leaving directory `/usr/src/linux-2.6.17-ck1.1'
make: *** [all] B=B3=B1d 2

=2D---------------------------------------------------

how to fix this error ? - help please

I looked on the ATI install CD, and there are hundreds of files,
and I have no idea which file(s) are the "microcode", or what
I should be looking for there. Sorry :)
Can someone give me a hint?
- per...@sb...


----- Original Message -----
From: <gat...@li...>
To: <gat...@li...>
Sent: Sunday, July 02, 2006 12:05 PM
Subject: Gatos-devel Digest, Vol 2, Issue 2


> Send Gatos-devel mailing list submissions to
> gat...@li...
>
> To subscribe or unsubscribe via the World Wide Web, visit
> https://lists.sourceforge.net/lists/listinfo/gatos-devel
> or, via email, send a message with subject or body 'help' to
> gat...@li...
>
> You can reach the person managing the list at
> gat...@li...
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of Gatos-devel digest..."
>
>
> Today's Topics:
>
>    1.  ATI Radeon 9600 and Gatos (persall88)
>    2. Re:  ATI Radeon 9600 and Gatos (Antti Ajanki)
>    3. Re:  ATI Radeon 9600 and Gatos (Vladimir Dergachev)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Sat, 1 Jul 2006 23:07:37 -0700
> From: persall88 <per...@sb...>
> Subject: [GATOS] ATI Radeon 9600 and Gatos
> To: gat...@li...
> Cc: vo...@mi..., cla...@ba...
> Message-ID: <200...@sb...>
> Content-Type: text/plain;  charset="utf-8"
>
>
> I took some advice from the gatos-devel mailing list, and upgraded
> my Debian 3.1 Sarge to the new Debian Testing version called Etch
> (this uses kernel 2.6.15-1-486), and proceeded to try to get the Gatos
> packages to work on this ATI Radeon 9600.  I finally got stuck on
> the compile of km.  Here is what I did, up to this point.
> Perhaps someone could help me figure out what to do next.
>
> I downloaded and installed linux-kernel-headers-2.6.15-1-486 and
> linux-source-2.6.15, also Debian pkgs.
> Then I downloaded and installed ATI.4.4.0: X.org 6.7.0 driver from Gatos.
>
> Then I tried compiling km-0.6.1.
> I got this error:
>   /usr/src/km/km.c:1026: error: ?PCI_DEVICE_ID_ATI_RADEON_LE? undeclared
here
>    (not in a function)
>   /usr/src/km/km.c:1028: error: ?PCI_DEVICE_ID_ATI_RADEON_LF? undeclared
here
>    (not in a function)
>
> So then I looked up the following info from various spots in the
> Xorg.0.logfile
>   ATI Radeon 9600 AP (AGP),
>   (II) Primary Device is: PCI 01:00:0
>   (II) ATI:  Candidate "Device" section "ATI Technologies, Inc. RV350 AP
>      [Radeon  9600]".
>   (WW) RADEON: No matching Device section for instance (BusID PCI:1:0:1)
found
>   (--) Chipset ATI Radeon 9600 AP (AGP) found
>   (--) RADEON(0): Chipset: "ATI Radeon 9600 AP (AGP)" (ChipID = 0x4150)
>   (II) RADEON(0): Detected Rage Theatre as device 1 on VIP bus with id
> 0x4d4a1002
>   (II) RADEON(0): Detected Rage Theatre revision 00000001
>   (II) RADEON(0): Microcode: Use default microcode type: BINARY
>   (EE) RADEON(0): Microcode: cannot load microcode
>   (II) RADEON(0): Rage Theatre disabled
>   (II) PCI: 01:00:0: chip 1002,4150 card 1002,4722 rev 00 class 03,00,00
hdr
> 80
>   (II) PCI: 01:00:1: chip 1002,4170 card 1002,4723 rev 00 class 03,80,00
hdr
> 00
>
> Then I edited km.c and modified the defines and the table
>   static struct pci_device_id km_pci_tbl [].
> I added the following 2 defines to the list:
>   #ifndef PCI_DEVICE_ID_ATI_RADEON_AP
>   #define PCI_DEVICE_ID_ATI_RADEON_AP    0x4150
>   #endif
>   #ifndef PCI_DEVICE_ID_ATI_RADEON_AP2
>   #define PCI_DEVICE_ID_ATI_RADEON_AP2    0x4170
>   #endif
>
> And I removed most of the entries from the struct, adding the
> following 2 for my ATI Radeon 9600:
>   {PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RADEON_AP,
>     PCI_ANY_ID, PCI_ANY_ID, 0, 0, HARDWARE_RADEON},
>   {PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RADEON_AP2,
>     PCI_ANY_ID, PCI_ANY_ID, 0, 0, HARDWARE_RADEON},
> Then I was able to compile km.
>
> Then it was time to compile ffmpeg-0.4.8.
> However now I got an error that I don't know how to fix.
>    Compile error:
>      In file included from avcodec.h:14,
>           from common.c:27:
>      common.h:66: error: array type has incomplete element type
>      common.h:70: error: array type has incomplete element type
>      make[1]: *** [common.o] Error 1
>      make[1]: Leaving directory `/usr/src/ffmpeg-0.4.8/libavcodec'
>
> In ffmpeg subdir libavcodec file common.h lines 64-70
> are the following:
>    struct AVOption;
>    #ifdef HAVE_MMX
>    extern const struct AVOption avoptions_common[3 + 5];
>    #else
>    extern const struct AVOption avoptions_common[3];
>    #endif
>    extern const struct AVOption avoptions_workaround_bug[11];
>
> Can I fix this somehow? Add some other "workaround"?
> Perhaps I need a newer ffmpeg, but it has to have the source code.
> At the ffmpeg website, you need something called "svn" which I
> don't know what it is, and even if I did, I don't know if it's
> going to work with Avview or not.
> Can anyone help me get past this block?
>
> - per...@sb...
>
>
>
>
>
> ------------------------------
>
> Message: 2
> Date: Sun, 2 Jul 2006 10:13:02 +0300 (EEST)
> From: Antti Ajanki <aa...@cc...>
> Subject: Re: [GATOS] ATI Radeon 9600 and Gatos
> To: gat...@li...
> Message-ID: <Pin...@dv...>
> Content-Type: TEXT/PLAIN; charset=US-ASCII; format=flowed
>
> On Sat, 1 Jul 2006, persall88 wrote:
>
> >
> > I took some advice from the gatos-devel mailing list, and upgraded
> > my Debian 3.1 Sarge to the new Debian Testing version called Etch
> > (this uses kernel 2.6.15-1-486), and proceeded to try to get the Gatos
> > packages to work on this ATI Radeon 9600.  I finally got stuck on
> > the compile of km.  Here is what I did, up to this point.
> > Perhaps someone could help me figure out what to do next.
> >
> > I downloaded and installed linux-kernel-headers-2.6.15-1-486 and
> > linux-source-2.6.15, also Debian pkgs.
> > Then I downloaded and installed ATI.4.4.0: X.org 6.7.0 driver from
Gatos.
>
> According to <http://packages.qa.debian.org/x/xorg.html> Debian Testing
> has X.org 7.0. It already includes Gatos code, so you don't need to
> install ATI drivers from the Gatos site (but you still need km for
capture).
>
> > Then it was time to compile ffmpeg-0.4.8.
> > However now I got an error that I don't know how to fix.
> >   Compile error:
> >     In file included from avcodec.h:14,
> >          from common.c:27:
> >     common.h:66: error: array type has incomplete element type
> >     common.h:70: error: array type has incomplete element type
> >     make[1]: *** [common.o] Error 1
> >     make[1]: Leaving directory `/usr/src/ffmpeg-0.4.8/libavcodec'
>
> Google reveals (http://gcc.gnu.org/ml/gcc/2005-02/msg00053.html) that
> recent gcc versions don't accept definitions of type "extern struct bla
> array[];"
>
> You have three options:
>
> 1) Use older gcc. Versions prior to 4.0 (?) do compile it OK.
>
> 2) Fix ffmpeg-0.4.8. <http://gcc.gnu.org/ml/gcc/2005-02/msg00067.html>
> gives a possible workaround.
>
> 3) Port Avview to use current ffmpeg (which hopefully has fixed the
> issue). Like I said, I once tried this but it wasn't trivial. OTOH, if you
> succeed, the result would be much appreciated ;)
>
> > At the ffmpeg website, you need something called "svn" which I
> > don't know what it is, and even if I did, I don't know if it's
> > going to work with Avview or not.
>
> svn is a version control system, similar to cvs. If you have ever
> downloaded source codes with cvs, using svn is a piece of cake.
>
> --
> Antti Ajanki
>
>
>
> ------------------------------
>
> Message: 3
> Date: Sun, 2 Jul 2006 10:03:43 -0400 (EDT)
> From: Vladimir Dergachev <vo...@mi...>
> Subject: Re: [GATOS] ATI Radeon 9600 and Gatos
> To: persall88 <per...@sb...>
> Cc: gat...@li...,
> cla...@ba...
> Message-ID: <Pin...@no...>
> Content-Type: TEXT/PLAIN; charset=US-ASCII; format=flowed
>
>
>
>    (--) RADEON(0): Chipset: "ATI Radeon 9600 AP (AGP)" (ChipID = 0x4150)
>    (II) RADEON(0): Detected Rage Theatre as device 1 on VIP bus with id
> 0x4d4a1002
>    (II) RADEON(0): Detected Rage Theatre revision 00000001
>    (II) RADEON(0): Microcode: Use default microcode type: BINARY
>    (EE) RADEON(0): Microcode: cannot load microcode
>       ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
>
> This is a problem you need to fix - Rage Theatre 200 requires a microcode
> file which can be found someplace on driver CD.
>
>                    best
>
>                         Vladimir Dergachev
>
>
>
> ------------------------------
>
> Using Tomcat but need to do more? Need to support web services, security?
> Get stuff done quickly with pre-integrated technology to make your job
easier
> Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
> http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
>
> ------------------------------
>
> _______________________________________________
> Gatos-devel mailing list
> Gat...@li...
> https://lists.sourceforge.net/lists/listinfo/gatos-devel
>
>
> End of Gatos-devel Digest, Vol 2, Issue 2
> *****************************************

   (--) RADEON(0): Chipset: "ATI Radeon 9600 AP (AGP)" (ChipID = 0x4150)
   (II) RADEON(0): Detected Rage Theatre as device 1 on VIP bus with id 
0x4d4a1002
   (II) RADEON(0): Detected Rage Theatre revision 00000001
   (II) RADEON(0): Microcode: Use default microcode type: BINARY
   (EE) RADEON(0): Microcode: cannot load microcode
      ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

This is a problem you need to fix - Rage Theatre 200 requires a microcode 
file which can be found someplace on driver CD.

                   best

                        Vladimir Dergachev

On Sat, 1 Jul 2006, persall88 wrote:

>
> I took some advice from the gatos-devel mailing list, and upgraded
> my Debian 3.1 Sarge to the new Debian Testing version called Etch
> (this uses kernel 2.6.15-1-486), and proceeded to try to get the Gatos
> packages to work on this ATI Radeon 9600.  I finally got stuck on
> the compile of km.  Here is what I did, up to this point.
> Perhaps someone could help me figure out what to do next.
>
> I downloaded and installed linux-kernel-headers-2.6.15-1-486 and
> linux-source-2.6.15, also Debian pkgs.
> Then I downloaded and installed ATI.4.4.0: X.org 6.7.0 driver from Gatos.

According to <http://packages.qa.debian.org/x/xorg.html> Debian Testing 
has X.org 7.0. It already includes Gatos code, so you don't need to 
install ATI drivers from the Gatos site (but you still need km for capture).

> Then it was time to compile ffmpeg-0.4.8.
> However now I got an error that I don't know how to fix.
>   Compile error:
>     In file included from avcodec.h:14,
>          from common.c:27:
>     common.h:66: error: array type has incomplete element type
>     common.h:70: error: array type has incomplete element type
>     make[1]: *** [common.o] Error 1
>     make[1]: Leaving directory `/usr/src/ffmpeg-0.4.8/libavcodec'

Google reveals (http://gcc.gnu.org/ml/gcc/2005-02/msg00053.html) that 
recent gcc versions don't accept definitions of type "extern struct bla 
array[];"

You have three options:

1) Use older gcc. Versions prior to 4.0 (?) do compile it OK.

2) Fix ffmpeg-0.4.8. <http://gcc.gnu.org/ml/gcc/2005-02/msg00067.html> 
gives a possible workaround.

3) Port Avview to use current ffmpeg (which hopefully has fixed the 
issue). Like I said, I once tried this but it wasn't trivial. OTOH, if you 
succeed, the result would be much appreciated ;)

> At the ffmpeg website, you need something called "svn" which I
> don't know what it is, and even if I did, I don't know if it's
> going to work with Avview or not.

svn is a version control system, similar to cvs. If you have ever 
downloaded source codes with cvs, using svn is a piece of cake.

-- 
Antti Ajanki

I took some advice from the gatos-devel mailing list, and upgraded
my Debian 3.1 Sarge to the new Debian Testing version called Etch
(this uses kernel 2.6.15-1-486), and proceeded to try to get the Gatos
packages to work on this ATI Radeon 9600.  I finally got stuck on
the compile of km.  Here is what I did, up to this point.
Perhaps someone could help me figure out what to do next.

I downloaded and installed linux-kernel-headers-2.6.15-1-486 and
linux-source-2.6.15, also Debian pkgs.
Then I downloaded and installed ATI.4.4.0: X.org 6.7.0 driver from Gatos.

Then I tried compiling km-0.6.1.
I got this error:
  /usr/src/km/km.c:1026: error: =E2=80=98PCI_DEVICE_ID_ATI_RADEON_LE=E2=80=
=99 undeclared here
   (not in a function)
  /usr/src/km/km.c:1028: error: =E2=80=98PCI_DEVICE_ID_ATI_RADEON_LF=E2=80=
=99 undeclared here
   (not in a function)

So then I looked up the following info from various spots in the=20
Xorg.0.logfile
  ATI Radeon 9600 AP (AGP),
  (II) Primary Device is: PCI 01:00:0
  (II) ATI:  Candidate "Device" section "ATI Technologies, Inc. RV350 AP
     [Radeon  9600]".
  (WW) RADEON: No matching Device section for instance (BusID PCI:1:0:1) fo=
und
  (--) Chipset ATI Radeon 9600 AP (AGP) found
  (--) RADEON(0): Chipset: "ATI Radeon 9600 AP (AGP)" (ChipID =3D 0x4150)
  (II) RADEON(0): Detected Rage Theatre as device 1 on VIP bus with id=20
0x4d4a1002
  (II) RADEON(0): Detected Rage Theatre revision 00000001
  (II) RADEON(0): Microcode: Use default microcode type: BINARY
  (EE) RADEON(0): Microcode: cannot load microcode
  (II) RADEON(0): Rage Theatre disabled
  (II) PCI: 01:00:0: chip 1002,4150 card 1002,4722 rev 00 class 03,00,00 hd=
r=20
80
  (II) PCI: 01:00:1: chip 1002,4170 card 1002,4723 rev 00 class 03,80,00 hd=
r=20
00

Then I edited km.c and modified the defines and the table
  static struct pci_device_id km_pci_tbl [].
I added the following 2 defines to the list: =20
  #ifndef PCI_DEVICE_ID_ATI_RADEON_AP
  #define PCI_DEVICE_ID_ATI_RADEON_AP    0x4150
  #endif
  #ifndef PCI_DEVICE_ID_ATI_RADEON_AP2
  #define PCI_DEVICE_ID_ATI_RADEON_AP2    0x4170
  #endif

And I removed most of the entries from the struct, adding the
following 2 for my ATI Radeon 9600:
  {PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RADEON_AP,
    PCI_ANY_ID, PCI_ANY_ID, 0, 0, HARDWARE_RADEON},
  {PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RADEON_AP2,
    PCI_ANY_ID, PCI_ANY_ID, 0, 0, HARDWARE_RADEON},
Then I was able to compile km.

Then it was time to compile ffmpeg-0.4.8.
However now I got an error that I don't know how to fix.
   Compile error:
     In file included from avcodec.h:14,
          from common.c:27:
     common.h:66: error: array type has incomplete element type
     common.h:70: error: array type has incomplete element type
     make[1]: *** [common.o] Error 1
     make[1]: Leaving directory `/usr/src/ffmpeg-0.4.8/libavcodec'

In ffmpeg subdir libavcodec file common.h lines 64-70
are the following:
   struct AVOption;
   #ifdef HAVE_MMX
   extern const struct AVOption avoptions_common[3 + 5];
   #else
   extern const struct AVOption avoptions_common[3];
   #endif
   extern const struct AVOption avoptions_workaround_bug[11];

Can I fix this somehow? Add some other "workaround"?
Perhaps I need a newer ffmpeg, but it has to have the source code.
At the ffmpeg website, you need something called "svn" which I
don't know what it is, and even if I did, I don't know if it's
going to work with Avview or not.
Can anyone help me get past this block?

=2D per...@sb...

----- Original Message -----
From: <gat...@li...>
To: <gat...@li...>
Sent: Wednesday, June 28, 2006 12:04 PM
Subject: Gatos-devel Digest, Vol 1, Issue 1917


> Send Gatos-devel mailing list submissions to
> gat...@li...
>
> To subscribe or unsubscribe via the World Wide Web, visit
> https://lists.sourceforge.net/lists/listinfo/gatos-devel
> or, via email, send a message with subject or body 'help' to
> gat...@li...
>
> You can reach the person managing the list at
> gat...@li...
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of Gatos-devel digest..."
>
>
> Today's Topics:
>
>    1.  RES:  ATI All in Wonder 9600 (Claudinei Camargo)
>    2.  State of TV Out Patches? (Hanno B?ck )
>    3. Re:  RES:  ATI All in Wonder 9600 (Vladimir Dergachev)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Wed, 28 Jun 2006 09:03:52 -0300
> From: "Claudinei Camargo" <cla...@ba...>
> Subject: [GATOS] RES:  ATI All in Wonder 9600
> To: <gat...@li...>
> Message-ID: <000001c69aaa$ec90fac0$3c02a8c0@clac>
> Content-Type: text/plain; charset="iso-8859-1"
>
> Hi all
>
>
> I have same problem here with video in an AIW9600, km doest generate the
> video device in dev directory. In NTSC mode I get a so bad signal B&W,
> are there some extra parameters to put inside xorg. Gatos avview is
> ready for PAL-M ?
>
> Nei
>
> -----Mensagem original-----
> De: gat...@li...
> [mailto:gat...@li...] Em nome de Bill
> Mullen
> Enviada em: segunda-feira, 26 de junho de 2006 14:55
> Para: gat...@li...
> Assunto: Re: [GATOS] ATI All in Wonder 9600
>
> On Sun, 25 Jun 2006 23:44:15 -0700, persall88 wrote:
>
> > Making progress, but not solved yet.
> > I got past the opcode failed request errors below,
> > by installing newer programs from gatos:
> >    ATI-6.7.0-exp1.i386.tar.gz
> >    km_0.6.1.tgz
> >    avview-0.80.7.tar.gz
> > Now, when I start_avview, at least it starts, but it doesn't recognize
> > any km device for video input. When I run start_avview, the console
> > feedback is the following:
> > NUM_ADAPTORS=1
> > Adaptor 0: ATI Radeon Video Adapter
> >    type input video image
> >    ports 61
> > 61 ATI Radeon Video Adapter
> > master=.controlwin row=1 column=0
> > Looking for km device that corresponds to PCI:01:00.0
> > km_devs=
> > master=.controlwin row=1 column=0
> > In the Avview Control Window, there is no km device listed under card
> > for V4l, just "none" and "automatic".
> > As I mentioned, I'm running Debian 3.1 Sarge, with kernel 2.6.8,
> > which uses X 4.3.
>
> Have you tried XawTV as an alternative to avview? I don't run Debian,
> but I'd be shocked if it wasn't available in .deb form. I've had good
> luck with it with several Radeon cards; admittedly, all were older ones
> which were already well supported by the GATOS drivers (and I wasn't
> trying to record, just to view, so km wasn't a factor). I've run into a
> couple of situations where XawTV worked quite well while avview didn't,
> so it seems as if it'd at least be worth giving it a shot in this case.
>
> --
> Bill Mullen
> RLU #270075
>
> Using Tomcat but need to do more? Need to support web services,
> security?
> Get stuff done quickly with pre-integrated technology to make your job
> easier
> Download IBM WebSphere Application Server v.1.0.1 based on Apache
> Geronimo
> http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
> _______________________________________________
> Gatos-devel mailing list
> Gat...@li...
> https://lists.sourceforge.net/lists/listinfo/gatos-devel
>
> E-mail classificado pelo Identificador de Spam Inteligente Terra.
> Para alterar a categoria classificada, visite
> http://mail.terra.com.br/protected_email/imail/imail.cgi?+_u=claudinei.c
> amargo&_l=1,1151344578.227558.16792.sotovento.hst.terra.com.br,5951,Des1
> 5,Des15
>
> Esta mensagem foi verificada pelo E-mail Protegido Terra.
> Scan engine: McAfee VirusScan / Atualizado em 26/06/2006 / Vers?o:
> 4.4.00/4793
> Proteja o seu e-mail Terra: http://mail.terra.com.br/
>
>
>
>
> ------------------------------
>
> Message: 2
> Date: Fri, 16 Jun 2006 09:30:40 +0200
> From: "Hanno B?ck " <ma...@hb...>
> Subject: [GATOS] State of TV Out Patches?
> To: gat...@li...
> Message-ID: <200...@hb...>
> Content-Type: text/plain; charset="utf-8"
>
> Hi,
>
> I recently noticed that there is some new work done on tv-out-support for
> radeon-cards:
> http://megahurts.dk/rune/tv_output.html
>
> The latest patches don't apply to the (just released)
xf86-video-ati-6.6.1. Is
> the author of this page reading this?
> (I'll have a look into the patch later today and see if the changes are
> trivial)
>
> Then there's written that it's based on Frederico Ullivi's GPLed work. Is
he
> on this list? Has he been asked to relicense his code?
>
> cu,
>
> --
> Hanno B?ck Blog:   http://www.hboeck.de/
> GPG: 3DBD3B20 Jabber: ja...@hb...
> -------------- next part --------------
> A non-text attachment was scrubbed...
> Name: not available
> Type: application/pgp-signature
> Size: 189 bytes
> Desc: not available
> Url :
http://sourceforge.net/mailarchive/forum.php?forum=gatos-devel/attachments/2
0060616/aef4022c/attachment.bin
>
> ------------------------------
>
> Message: 3
> Date: Wed, 28 Jun 2006 11:52:11 -0400 (EDT)
> From: Vladimir Dergachev <vo...@mi...>
> Subject: Re: [GATOS] RES:  ATI All in Wonder 9600
> To: Claudinei Camargo <cla...@ba...>
> Cc: gat...@li...
> Message-ID: <Pin...@no...>
> Content-Type: text/plain; charset="iso-8859-1"
>
>
>
> On Wed, 28 Jun 2006, Claudinei Camargo wrote:
>
> > Hi all
> >
> >
> > I have same problem here with video in an AIW9600, km doest generate the
> > video device in dev directory. In NTSC mode I get a so bad signal B&W,
> > are there some extra parameters to put inside xorg. Gatos avview is
> > ready for PAL-M ?
>
> One possibility is that km does not have PCI id of your card. You can use
> lspci to find which pci id your card has (try both "lspci" and "lspci -n")
> and then add it to list of PCI ids km supports.
>
> As for PAL-M I am not sure whether this works (or ever worked properly).
> If the mode is there is means that ATI provided the numbers needed for the
> mode to work. However, the numbers required much tweaking to get SECAM to
> work properly, so I would not be surprised if the same is required of
> PAL-M.
>
>                          best
>
>                             Vladimir Dergachev
>
> >
> > Nei
> >
> > -----Mensagem original-----
> > De: gat...@li...
> > [mailto:gat...@li...] Em nome de Bill
> > Mullen
> > Enviada em: segunda-feira, 26 de junho de 2006 14:55
> > Para: gat...@li...
> > Assunto: Re: [GATOS] ATI All in Wonder 9600
> >
> > On Sun, 25 Jun 2006 23:44:15 -0700, persall88 wrote:
> >
> >> Making progress, but not solved yet.
> >> I got past the opcode failed request errors below,
> >> by installing newer programs from gatos:
> >>    ATI-6.7.0-exp1.i386.tar.gz
> >>    km_0.6.1.tgz
> >>    avview-0.80.7.tar.gz
> >> Now, when I start_avview, at least it starts, but it doesn't recognize
> >> any km device for video input. When I run start_avview, the console
> >> feedback is the following:
> >> NUM_ADAPTORS=1
> >> Adaptor 0: ATI Radeon Video Adapter
> >>    type input video image
> >>    ports 61
> >> 61 ATI Radeon Video Adapter
> >> master=.controlwin row=1 column=0
> >> Looking for km device that corresponds to PCI:01:00.0
> >> km_devs=
> >> master=.controlwin row=1 column=0
> >> In the Avview Control Window, there is no km device listed under card
> >> for V4l, just "none" and "automatic".
> >> As I mentioned, I'm running Debian 3.1 Sarge, with kernel 2.6.8,
> >> which uses X 4.3.
> >
> > Have you tried XawTV as an alternative to avview? I don't run Debian,
> > but I'd be shocked if it wasn't available in .deb form. I've had good
> > luck with it with several Radeon cards; admittedly, all were older ones
> > which were already well supported by the GATOS drivers (and I wasn't
> > trying to record, just to view, so km wasn't a factor). I've run into a
> > couple of situations where XawTV worked quite well while avview didn't,
> > so it seems as if it'd at least be worth giving it a shot in this case.
> >
> > --
> > Bill Mullen
> > RLU #270075
> >
> > Using Tomcat but need to do more? Need to support web services,
> > security?
> > Get stuff done quickly with pre-integrated technology to make your job
> > easier
> > Download IBM WebSphere Application Server v.1.0.1 based on Apache
> > Geronimo
> > http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
> > _______________________________________________
> > Gatos-devel mailing list
> > Gat...@li...
> > https://lists.sourceforge.net/lists/listinfo/gatos-devel
> >
> > E-mail classificado pelo Identificador de Spam Inteligente Terra.
> > Para alterar a categoria classificada, visite
> > http://mail.terra.com.br/protected_email/imail/imail.cgi?+_u=claudinei.c
> > amargo&_l=1,1151344578.227558.16792.sotovento.hst.terra.com.br,5951,Des1
> > 5,Des15
> >
> > Esta mensagem foi verificada pelo E-mail Protegido Terra.
> > Scan engine: McAfee VirusScan / Atualizado em 26/06/2006 / Vers?o:
> > 4.4.00/4793
> > Proteja o seu e-mail Terra: http://mail.terra.com.br/
> >
> >
> > Using Tomcat but need to do more? Need to support web services,
security?
> > Get stuff done quickly with pre-integrated technology to make your job
easier
> > Download IBM WebSphere Application Server v.1.0.1 based on Apache
Geronimo
> > http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
> > _______________________________________________
> > Gatos-devel mailing list
> > Gat...@li...
> > https://lists.sourceforge.net/lists/listinfo/gatos-devel
> >
>
> ------------------------------
>
> Using Tomcat but need to do more? Need to support web services, security?
> Get stuff done quickly with pre-integrated technology to make your job
easier
> Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
> http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
>
> ------------------------------
>
> _______________________________________________
> Gatos-devel mailing list
> Gat...@li...
> https://lists.sourceforge.net/lists/listinfo/gatos-devel
>
>
> End of Gatos-devel Digest, Vol 1, Issue 1917
> ********************************************
Claudinei:
At least you are able to get some signal. I don't get any TV at all with
this card.
Which version of the ATI programs are you trying (ATI-??, km-??, Avview-??).

Vladimir:
Where is the list of PC IDs that I need to modify.
Would it help to add a BusID line to my XF86Config-4 file for the Device
section,
or possibly adding a VideoAdapter section with the BusID of the Secondary
adapter
on this card?  I did "man XF86Config-4" and for the VideoAdapter section it
just
said "Nobody seems to know about this" or something to that effect.

Thanks. One of these days we'll get this card to work, I'm sure of it!
- per...@sb...