gatos-devel Mailing List for GATOS

> Ok, it works if I disconnect the other monitor, which is what I wanted 
> anyway. How can I adjust the image position? it cuts off part of the 
> screen because it's too far to the upper right. Plus my mouse wont work 
> since I removed those two options form the config file. I've got 
> Xorg.0.log and a picture I snapped of the TV.

You can try to move the image with tvo_set, it will likely not work.
the driver lacks any real support for moving the Image... it should be 
pretty close.


Rune Petersen

On Mon, 2005-08-29 at 00:03 +0200, Rune Petersen wrote:
> What version of X are you using?
>=20
>=20
> Rune Petersen

XFree86 Version 4.3.99.12 (DRI trunk)
Release Date: 10 September 2003
X Protocol Version 11, Revision 0, Release 6.6
Build Operating System: Linux 2.6.7 i686 [ELF]
Current Operating System: Linux teratron.lan.kilotron.etheus.net
2.6.12.1 #19 Tue Aug 16 19:28:58 BST 2005 i686
Build Date: 08 July 2004
Changelog Date: 10 September 2003
        Before reporting problems, check http://www.XFree86.Org/
        to make sure that you have the latest version.
Module Loader present

This is the X server that comes with Debian Sarge and with the following
sources for the DRI trunk packaged:
deb http://people.debian.org/~daenzer/dri-trunk-unstable/ ./
deb-src http://people.debian.org/~daenzer/dri-trunk-unstable/ ./

The GATOS drivers were compiled against the source tree from dri-trunk.
A few modifications had to be made in order to make it compile, then I
took some of the ReInit code from the original DRI driver to prevent the
machine from locking up after resuming from a suspend to disk.

--=20
Craig Shelley
EMail: cr...@mi...
Jabber: sh...@ja...

Rune Petersen wrote:

> nick mudd wrote:
>
>> I patched X.org 6.8.99.15 and it detects the ERT and loads
>> theatre_out_drv. I think it wants to work, but I'm not sure. I have the
>> xorg.conf and Xorg.0.log attached. I'm using a radeon 7500. I've got
>> these errors:
>>
>> _XSERVTransSocketOpenCOTSServer: Unable to open socket for inet6
>> _XSERVTransOpen: transport open failed for inet6/tv:0
>> _XSERVTransMakeAllCOTSServerListeners: failed to open listener for inet6
>>
>> (WW) ****INVALID MEM ALLOCATION**** b: 0xd0000000 e: 0xd8000000 
>> correcting
>>
>> (WW) ****INVALID IO ALLOCATION**** b: 0xc000 e: 0xc100 correcting
>>
>>
>
> The warnings/errors should have no effect.
>
> Please try removing:
> Option "MergedFB" "true"
> Option "CRT2Position" "Clone"
>
> They should not be there.
>
>
> Rune Petersen
>
>
> -------------------------------------------------------
> SF.Net email is Sponsored by the Better Software Conference & EXPO
> September 19-22, 2005 * San Francisco, CA * Development Lifecycle 
> Practices
> Agile & Plan-Driven Development * Managing Projects & Teams * Testing 
> & QA
> Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf
> _______________________________________________
> Gatos-devel mailing list
> Gat...@li...
> https://lists.sourceforge.net/lists/listinfo/gatos-devel
>
Ok, it works if I disconnect the other monitor, which is what I wanted 
anyway. How can I adjust the image position? it cuts off part of the 
screen because it's too far to the upper right. Plus my mouse wont work 
since I removed those two options form the config file. I've got 
Xorg.0.log and a picture I snapped of the TV.

nick mudd wrote:
> I patched X.org 6.8.99.15 and it detects the ERT and loads
> theatre_out_drv. I think it wants to work, but I'm not sure. I have the
> xorg.conf and Xorg.0.log attached. I'm using a radeon 7500. I've got
> these errors:
> 
> _XSERVTransSocketOpenCOTSServer: Unable to open socket for inet6
> _XSERVTransOpen: transport open failed for inet6/tv:0
> _XSERVTransMakeAllCOTSServerListeners: failed to open listener for inet6
> 
> (WW) ****INVALID MEM ALLOCATION**** b: 0xd0000000 e: 0xd8000000 correcting
> 
> (WW) ****INVALID IO ALLOCATION**** b: 0xc000 e: 0xc100 correcting
> 
> 

The warnings/errors should have no effect.

Please try removing:
Option "MergedFB" "true"
Option "CRT2Position" "Clone"

They should not be there.


Rune Petersen

Hi All,

I am just writing to confirm the successful use of the TVOut feature on
a Radeon 9100 card with DRI Framebuffer Splash and Software Suspend 2
This has required some code modification to prevent lockups on resume,
and switching VT etc.. (code taken from the DRI driver)
At the moment it is really hacky, but I hope to produce a clean patch
soon.
Any feedback would be appreciated.

--=20
Craig Shelley
EMail: cr...@mi...
Jabber: sh...@ja...

I patched X.org 6.8.99.15 and it detects the ERT and loads
theatre_out_drv. I think it wants to work, but I'm not sure. I have the
xorg.conf and Xorg.0.log attached. I'm using a radeon 7500. I've got
these errors:

_XSERVTransSocketOpenCOTSServer: Unable to open socket for inet6
_XSERVTransOpen: transport open failed for inet6/tv:0
_XSERVTransMakeAllCOTSServerListeners: failed to open listener for inet6

(WW) ****INVALID MEM ALLOCATION**** b: 0xd0000000 e: 0xd8000000 correcting

(WW) ****INVALID IO ALLOCATION**** b: 0xc000 e: 0xc100 correcting

I patched X.org 6.8.99.15 and it detects the ERT and loads 
theatre_out_drv. I think it wants to work, but I'm not sure. I have the 
xorg.conf and Xorg.0.log attached. I'm using a radeon 7500. I've got 
these errors:

_XSERVTransSocketOpenCOTSServer: Unable to open socket for inet6
_XSERVTransOpen: transport open failed for inet6/tv:0
_XSERVTransMakeAllCOTSServerListeners: failed to open listener for inet6

(WW) ****INVALID MEM ALLOCATION**** b: 0xd0000000 e: 0xd8000000 correcting

(WW) ****INVALID IO ALLOCATION**** b: 0xc000 e: 0xc100 correcting

I patched X.org 6.8.99.15 and it detects the ERT and loads 
theatre_out_drv. I think it wants to work, but I'm not sure. I have the 
xorg.conf and Xorg.0.log attached. I'm using a radeon 7500. I've got 
these errors:

_XSERVTransSocketOpenCOTSServer: Unable to open socket for inet6
_XSERVTransOpen: transport open failed for inet6/tv:0
_XSERVTransMakeAllCOTSServerListeners: failed to open listener for inet6

(WW) ****INVALID MEM ALLOCATION**** b: 0xd0000000 e: 0xd8000000 correcting

(WW) ****INVALID IO ALLOCATION**** b: 0xc000 e: 0xc100 correcting

On Fri, Aug 19, 2005 at 03:56:15AM +0100, Steven Newbury wrote:
>=20
> --- Pasi K=E4rkk=E4inen <pa...@ik...> wrote:
>=20
>=20
> > Hi!
> >=20
> > Sorry, but I haven't used memaccess library myself.. I think I got th=
e url
> > from dri-devel list, where somebody was using it for almost the same =
purpose
> > :)
> > =20
> > If you have msvc you could try with that.
> >=20
> > - Pasi
> >=20
> Funny enough, that was me too!  I was just hoping I wouldn't have to ge=
t stuck
> into Windows programming, I really am quite clueless about that side of=
 things!
> ;-)
>=20
> I'll see if original person who recommended memaccess has any advice.  =
I might
> be able to get hold of a copy of MSVC, we'll see.
>

Heh.. :)

You could also try the express version of visual studio, which is availab=
le
for free from microsoft website..

- Pasi
=20
>=20
> Steve
>=20
>=20
> 	=09
> ___________________________________________________________=20
> How much free photo storage do you get? Store your holiday=20
> snaps for FREE with Yahoo! Photos http://uk.photos.yahoo.com
>=20
>=20
> -------------------------------------------------------
> SF.Net email is Sponsored by the Better Software Conference & EXPO
> September 19-22, 2005 * San Francisco, CA * Development Lifecycle Pract=
ices
> Agile & Plan-Driven Development * Managing Projects & Teams * Testing &=
 QA
> Security * Process Improvement & Measurement * http://www.sqe.com/bsce5=
sf
> _______________________________________________
> Gatos-devel mailing list
> Gat...@li...
> https://lists.sourceforge.net/lists/listinfo/gatos-devel

As I understand it, The GATOS project doesn't provide enough of the V4L API
to use the All in wonder Series for use as a PVR (MythTV).  Is this
entirely true?  If so, are there plans to implement the spec fully?  If
not, what are the hurdles?

Thanks,
Jason

Ladies and Gents,
I'd love to know whether or not there is source available for this project?
I've searched the sourceforge site.. but to no avail.
It is my intention to try and manipulate some code into an Apple OS X Video
Driver Kernel Extension to get my Radeon Mobility 7500C working properly.

Any help is appreciated!

Steven Hoefel

On Thursday 18 August 2005 03:52 am, neb...@ti... wrote:
> i'm running xorg 6.8.2 Xserver from slamd64
> but it does not detect my aiw9800 card
> as far as i remember gatos driver should be
> merged with xorg 6.8.2, right?
No. It's a feature planned for inclusion in 7.0. In fact, it has been merge=
d=20
into the development tree already.
>
> so i have a few question:
> 1. is radeon 9800 not yet supported? should I try cvs?
Xorg CVS and snapshots (6.8.99.xx) do have the merged code.
> 2. is this still the right place to post or should I try
>     some xorg list?
Yes.
> 3. if there anybody who can/is willing to  make a short
>     status report for newer card?
>
> thanx guys
> regards
>
> nebok
>
> __________________________________________________________________
> TISCALI ADSL 1.25 MEGA
> Solo con Tiscali Adsl navighi senza limiti e telefoni senza canone Telecom
> a partire da 19,95 Euro/mese.
> Attivala entro il 31 agosto, il primo MESE =E8 GRATIS! CLICCA QUI.
> http://abbonati.tiscali.it/adsl/sa/1e25flat_tc/
>
>
>
>
>
> -------------------------------------------------------
> SF.Net email is Sponsored by the Better Software Conference & EXPO
> September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practic=
es
> Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA
> Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf
> _______________________________________________
> Gatos-devel mailing list
> Gat...@li...
> https://lists.sourceforge.net/lists/listinfo/gatos-devel

I need to ask, what are the correct Avview parameters for recording DV AVI?
I was able to record a segment as MPEG-4 HQ, but I did not change any
other parameters in the Avview configuration, and then the resulting
recorded file was not usable by any app I have that normally uses such files.
Perhaps I need to change the Capture parameters such as Deinterlace method,
from double-interpolaete, and Frame skipping from one half, etc etc.
Don't know. Anybody know what is correct here, for DV AVI recording with 
Avview?
-- per...@sb...

I can capture fine to MPEG1 HQ, but when I changed
the Encoder setings to MPEG-4 VHQ, and then tried 
to "Record" -- first the message came up about the 1 gb
AVI file limit, and then when I said "OK", the program
just disappeared completely.
Do I need to change some other settings or what?
-- per...@sb...

On Fri, 19 Aug 2005, Terry Shipclark wrote:

> Okay I managed to get Avview Recording Correctly and I am very pleased
> at its performance.  It obviously isnt without its problems but it will
> work for my needs.  Now if I can just get the audio to switch to the
> tuner I will be good to go.

Audio can be a little tricky:

     * do not forget that there is more than one chip that controls audio

     * there is usually and audio mixer on the AIW card itself

        (use arrows while pointing in the TV window to adjust it)

     * and there is usually a mixer in the sound card itself.

     * some sound cards have a way of reconfiguring what their
       inputs/outputs are - this especially applies to onboard sound.

       So in one setting the 4 audio jacks can be 5.1 channel out and
       in other setting there could be 2 stereo out, line in and mic in.

                          best

                             Vladimir Dergachev

>
> On Thu, 2005-08-18 at 15:57 -0400, Vladimir Dergachev wrote:
>>
>> On Thu, 18 Aug 2005, Terry Shipclark wrote:
>>
>>> Okay both of these worked, so I am assuming that it is in fact working,
>>> however I have absolutely no idea how to use the avview capture feature.
>>> Is there documentation somewhere on this subject?? The documentation
>>> that I have found seems to be outdated
>>
>> First of all, is capture button greyed out ? If so, you did not link
>> ffmpeg library and you need to recompile AVview.
>>
>> If not, open AVview setup window and adjust capture parameters. I
>> recommend mpeg2 video, mpeg1 sound, "double-interpolate".
>>
>> Put in filename and press capture..
>>
>> This is how it worked last time I used it, unfortunately, I cannot test it
>> at the moment (I am travelling and have only my notebook with me).
>>
>>                    best
>>
>>                        Vladimir Dergachev
>>
>>>
>>>
>>> On Thu, 2005-08-18 at 10:52 -0400, Vladimir Dergachev wrote:
>>>>
>>>> On Thu, 18 Aug 2005, Terry Shipclark wrote:
>>>>
>>>>> Well as it stands right now it doesnt work, wether it is km or another
>>>>> factor, I do not know, however I read in the archives that others could
>>>>> not get it to work either.  Basically it loads fine, and I dont get any
>>>>> kernel oops or anything, however when I run xawtv to capture video I get
>>>>> a series of error messages:
>>>>>
>>>>> octl:
>>>>> VIDIOCSPICT(brightness=32768;hue=32768;colour=32768;contrast=0;whiteness=32768;depth=32;palette=unknown): Invalid argument
>>>>> ioctl:
>>>>> VIDIOCSPICT(brightness=32768;hue=32768;colour=32768;contrast=0;whiteness=32768;depth=32;palette=RGB32): Invalid argument
>>>>> ioctl:
>>>>> VIDIOCSPICT(brightness=32768;hue=32768;colour=32768;contrast=0;whiteness=32768;depth=8;palette=GREY): Invalid argument
>>>>> ioctl: VIDIOCSWIN(x=0;y=0;width=384;height=240;chromakey=0;flags=0):
>>>>> Invalid argument
>>>>> ioctl:
>>>>> VIDIOCSPICT(brightness=32768;hue=32768;colour=32768;contrast=0;whiteness=32768;depth=16;palette=YUV422P): Invalid argument
>>>>> ioctl:
>>>>> VIDIOCSPICT(brightness=32768;hue=32768;colour=32768;contrast=0;whiteness=32768;depth=12;palette=YUV420P): Invalid argument
>>>>> no way to get: 384x288 32 bit TrueColor (LE: bgr-)
>>>>>
>>>>
>>>> What application are you trying to use ?
>>>>
>>>> You need to start AVview so that picture is displayed and then you can do
>>>> something like "cat /dev/video0" to test capture. If this works, try
>>>> AVview snapshot feature - if that works, try AVview capture feature.
>>>>
>>>>                         best
>>>>
>>>>                           Vladimir Dergachev
>>>>
>>>>>
>>>>>
>>>>>
>>>>> On Wed, 2005-08-17 at 08:53 -0400, Vladimir Dergachev wrote:
>>>>>>
>>>>>> On Wed, 17 Aug 2005, Terry Shipclark wrote:
>>>>>>
>>>>>>> Hello,
>>>>>>>
>>>>>>> Has anybody made any progress, or done any research as to what needs to
>>>>>>> be done to the km module to make it work on a 64 bit system?  I am going
>>>>>>> to attempt to port it in the next couple of weeks, but I was hoping that
>>>>>>> someone has made some progress.
>>>>>>
>>>>>> Hi Terry,
>>>>>>
>>>>>>    What are the issues you are having with km ?
>>>>>>
>>>>>>                    best
>>>>>>
>>>>>>                      Vladimir Dergachev
>>>>>>
>>>>>>>
>>>>>>> Terry
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> -------------------------------------------------------
>>>>>>> SF.Net email is Sponsored by the Better Software Conference & EXPO
>>>>>>> September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices
>>>>>>> Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA
>>>>>>> Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf
>>>>>>> _______________________________________________
>>>>>>> Gatos-devel mailing list
>>>>>>> Gat...@li...
>>>>>>> https://lists.sourceforge.net/lists/listinfo/gatos-devel
>>>>>>>
>>>>>>
>>>>>>
>>>>>> -------------------------------------------------------
>>>>>> SF.Net email is Sponsored by the Better Software Conference & EXPO
>>>>>> September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices
>>>>>> Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA
>>>>>> Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf
>>>>>> _______________________________________________
>>>>>> Gatos-devel mailing list
>>>>>> Gat...@li...
>>>>>> https://lists.sourceforge.net/lists/listinfo/gatos-devel
>>>>>
>>>>
>>>>
>>>> -------------------------------------------------------
>>>> SF.Net email is Sponsored by the Better Software Conference & EXPO
>>>> September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices
>>>> Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA
>>>> Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf
>>>> _______________________________________________
>>>> Gatos-devel mailing list
>>>> Gat...@li...
>>>> https://lists.sourceforge.net/lists/listinfo/gatos-devel
>>>
>

Okay I managed to get Avview Recording Correctly and I am very pleased
at its performance.  It obviously isnt without its problems but it will
work for my needs.  Now if I can just get the audio to switch to the
tuner I will be good to go.

On Thu, 2005-08-18 at 15:57 -0400, Vladimir Dergachev wrote:
> 
> On Thu, 18 Aug 2005, Terry Shipclark wrote:
> 
> > Okay both of these worked, so I am assuming that it is in fact working,
> > however I have absolutely no idea how to use the avview capture feature.
> > Is there documentation somewhere on this subject?? The documentation
> > that I have found seems to be outdated
> 
> First of all, is capture button greyed out ? If so, you did not link 
> ffmpeg library and you need to recompile AVview.
> 
> If not, open AVview setup window and adjust capture parameters. I 
> recommend mpeg2 video, mpeg1 sound, "double-interpolate".
> 
> Put in filename and press capture..
> 
> This is how it worked last time I used it, unfortunately, I cannot test it 
> at the moment (I am travelling and have only my notebook with me).
> 
>                    best
> 
>                        Vladimir Dergachev
> 
> >
> >
> > On Thu, 2005-08-18 at 10:52 -0400, Vladimir Dergachev wrote:
> >>
> >> On Thu, 18 Aug 2005, Terry Shipclark wrote:
> >>
> >>> Well as it stands right now it doesnt work, wether it is km or another
> >>> factor, I do not know, however I read in the archives that others could
> >>> not get it to work either.  Basically it loads fine, and I dont get any
> >>> kernel oops or anything, however when I run xawtv to capture video I get
> >>> a series of error messages:
> >>>
> >>> octl:
> >>> VIDIOCSPICT(brightness=32768;hue=32768;colour=32768;contrast=0;whiteness=32768;depth=32;palette=unknown): Invalid argument
> >>> ioctl:
> >>> VIDIOCSPICT(brightness=32768;hue=32768;colour=32768;contrast=0;whiteness=32768;depth=32;palette=RGB32): Invalid argument
> >>> ioctl:
> >>> VIDIOCSPICT(brightness=32768;hue=32768;colour=32768;contrast=0;whiteness=32768;depth=8;palette=GREY): Invalid argument
> >>> ioctl: VIDIOCSWIN(x=0;y=0;width=384;height=240;chromakey=0;flags=0):
> >>> Invalid argument
> >>> ioctl:
> >>> VIDIOCSPICT(brightness=32768;hue=32768;colour=32768;contrast=0;whiteness=32768;depth=16;palette=YUV422P): Invalid argument
> >>> ioctl:
> >>> VIDIOCSPICT(brightness=32768;hue=32768;colour=32768;contrast=0;whiteness=32768;depth=12;palette=YUV420P): Invalid argument
> >>> no way to get: 384x288 32 bit TrueColor (LE: bgr-)
> >>>
> >>
> >> What application are you trying to use ?
> >>
> >> You need to start AVview so that picture is displayed and then you can do
> >> something like "cat /dev/video0" to test capture. If this works, try
> >> AVview snapshot feature - if that works, try AVview capture feature.
> >>
> >>                         best
> >>
> >>                           Vladimir Dergachev
> >>
> >>>
> >>>
> >>>
> >>> On Wed, 2005-08-17 at 08:53 -0400, Vladimir Dergachev wrote:
> >>>>
> >>>> On Wed, 17 Aug 2005, Terry Shipclark wrote:
> >>>>
> >>>>> Hello,
> >>>>>
> >>>>> Has anybody made any progress, or done any research as to what needs to
> >>>>> be done to the km module to make it work on a 64 bit system?  I am going
> >>>>> to attempt to port it in the next couple of weeks, but I was hoping that
> >>>>> someone has made some progress.
> >>>>
> >>>> Hi Terry,
> >>>>
> >>>>    What are the issues you are having with km ?
> >>>>
> >>>>                    best
> >>>>
> >>>>                      Vladimir Dergachev
> >>>>
> >>>>>
> >>>>> Terry
> >>>>>
> >>>>>
> >>>>>
> >>>>> -------------------------------------------------------
> >>>>> SF.Net email is Sponsored by the Better Software Conference & EXPO
> >>>>> September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices
> >>>>> Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA
> >>>>> Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf
> >>>>> _______________________________________________
> >>>>> Gatos-devel mailing list
> >>>>> Gat...@li...
> >>>>> https://lists.sourceforge.net/lists/listinfo/gatos-devel
> >>>>>
> >>>>
> >>>>
> >>>> -------------------------------------------------------
> >>>> SF.Net email is Sponsored by the Better Software Conference & EXPO
> >>>> September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices
> >>>> Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA
> >>>> Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf
> >>>> _______________________________________________
> >>>> Gatos-devel mailing list
> >>>> Gat...@li...
> >>>> https://lists.sourceforge.net/lists/listinfo/gatos-devel
> >>>
> >>
> >>
> >> -------------------------------------------------------
> >> SF.Net email is Sponsored by the Better Software Conference & EXPO
> >> September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices
> >> Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA
> >> Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf
> >> _______________________________________________
> >> Gatos-devel mailing list
> >> Gat...@li...
> >> https://lists.sourceforge.net/lists/listinfo/gatos-devel
> >

--- Pasi Kärkkäinen <pa...@ik...> wrote:


> Hi!
> 
> Sorry, but I haven't used memaccess library myself.. I think I got the url
> from dri-devel list, where somebody was using it for almost the same purpose
> :)
>  
> If you have msvc you could try with that.
> 
> - Pasi
> 
Funny enough, that was me too!  I was just hoping I wouldn't have to get stuck
into Windows programming, I really am quite clueless about that side of things!
;-)

I'll see if original person who recommended memaccess has any advice.  I might
be able to get hold of a copy of MSVC, we'll see.


Steve


		
___________________________________________________________ 
How much free photo storage do you get? Store your holiday 
snaps for FREE with Yahoo! Photos http://uk.photos.yahoo.com

i'm running xorg 6.8.2 Xserver from slamd64
but it does not detect my aiw9800 card
as far as i remember gatos driver should be 
merged with xorg 6.8.2, right?

so i have a few question:
1. is radeon 9800 not yet supported? should I try cvs?
2. is this still the right place to post or should I try
    some xorg list?
3. if there anybody who can/is willing to  make a short 
    status report for newer card?

thanx guys
regards

nebok

__________________________________________________________________
TISCALI ADSL 1.25 MEGA
Solo con Tiscali Adsl navighi senza limiti e telefoni senza canone Teleco=
m
a partire da 19,95 Euro/mese.
Attivala entro il 31 agosto, il primo MESE =E8 GRATIS! CLICCA QUI.
http://abbonati.tiscali.it/adsl/sa/1e25flat_tc/

On Thu, 18 Aug 2005, Terry Shipclark wrote:

> Okay both of these worked, so I am assuming that it is in fact working,
> however I have absolutely no idea how to use the avview capture feature.
> Is there documentation somewhere on this subject?? The documentation
> that I have found seems to be outdated

First of all, is capture button greyed out ? If so, you did not link 
ffmpeg library and you need to recompile AVview.

If not, open AVview setup window and adjust capture parameters. I 
recommend mpeg2 video, mpeg1 sound, "double-interpolate".

Put in filename and press capture..

This is how it worked last time I used it, unfortunately, I cannot test it 
at the moment (I am travelling and have only my notebook with me).

                   best

                       Vladimir Dergachev

>
>
> On Thu, 2005-08-18 at 10:52 -0400, Vladimir Dergachev wrote:
>>
>> On Thu, 18 Aug 2005, Terry Shipclark wrote:
>>
>>> Well as it stands right now it doesnt work, wether it is km or another
>>> factor, I do not know, however I read in the archives that others could
>>> not get it to work either.  Basically it loads fine, and I dont get any
>>> kernel oops or anything, however when I run xawtv to capture video I get
>>> a series of error messages:
>>>
>>> octl:
>>> VIDIOCSPICT(brightness=32768;hue=32768;colour=32768;contrast=0;whiteness=32768;depth=32;palette=unknown): Invalid argument
>>> ioctl:
>>> VIDIOCSPICT(brightness=32768;hue=32768;colour=32768;contrast=0;whiteness=32768;depth=32;palette=RGB32): Invalid argument
>>> ioctl:
>>> VIDIOCSPICT(brightness=32768;hue=32768;colour=32768;contrast=0;whiteness=32768;depth=8;palette=GREY): Invalid argument
>>> ioctl: VIDIOCSWIN(x=0;y=0;width=384;height=240;chromakey=0;flags=0):
>>> Invalid argument
>>> ioctl:
>>> VIDIOCSPICT(brightness=32768;hue=32768;colour=32768;contrast=0;whiteness=32768;depth=16;palette=YUV422P): Invalid argument
>>> ioctl:
>>> VIDIOCSPICT(brightness=32768;hue=32768;colour=32768;contrast=0;whiteness=32768;depth=12;palette=YUV420P): Invalid argument
>>> no way to get: 384x288 32 bit TrueColor (LE: bgr-)
>>>
>>
>> What application are you trying to use ?
>>
>> You need to start AVview so that picture is displayed and then you can do
>> something like "cat /dev/video0" to test capture. If this works, try
>> AVview snapshot feature - if that works, try AVview capture feature.
>>
>>                         best
>>
>>                           Vladimir Dergachev
>>
>>>
>>>
>>>
>>> On Wed, 2005-08-17 at 08:53 -0400, Vladimir Dergachev wrote:
>>>>
>>>> On Wed, 17 Aug 2005, Terry Shipclark wrote:
>>>>
>>>>> Hello,
>>>>>
>>>>> Has anybody made any progress, or done any research as to what needs to
>>>>> be done to the km module to make it work on a 64 bit system?  I am going
>>>>> to attempt to port it in the next couple of weeks, but I was hoping that
>>>>> someone has made some progress.
>>>>
>>>> Hi Terry,
>>>>
>>>>    What are the issues you are having with km ?
>>>>
>>>>                    best
>>>>
>>>>                      Vladimir Dergachev
>>>>
>>>>>
>>>>> Terry
>>>>>
>>>>>
>>>>>
>>>>> -------------------------------------------------------
>>>>> SF.Net email is Sponsored by the Better Software Conference & EXPO
>>>>> September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices
>>>>> Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA
>>>>> Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf
>>>>> _______________________________________________
>>>>> Gatos-devel mailing list
>>>>> Gat...@li...
>>>>> https://lists.sourceforge.net/lists/listinfo/gatos-devel
>>>>>
>>>>
>>>>
>>>> -------------------------------------------------------
>>>> SF.Net email is Sponsored by the Better Software Conference & EXPO
>>>> September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices
>>>> Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA
>>>> Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf
>>>> _______________________________________________
>>>> Gatos-devel mailing list
>>>> Gat...@li...
>>>> https://lists.sourceforge.net/lists/listinfo/gatos-devel
>>>
>>
>>
>> -------------------------------------------------------
>> SF.Net email is Sponsored by the Better Software Conference & EXPO
>> September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices
>> Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA
>> Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf
>> _______________________________________________
>> Gatos-devel mailing list
>> Gat...@li...
>> https://lists.sourceforge.net/lists/listinfo/gatos-devel
>

Okay both of these worked, so I am assuming that it is in fact working,
however I have absolutely no idea how to use the avview capture feature.
Is there documentation somewhere on this subject?? The documentation
that I have found seems to be outdated


On Thu, 2005-08-18 at 10:52 -0400, Vladimir Dergachev wrote:
> 
> On Thu, 18 Aug 2005, Terry Shipclark wrote:
> 
> > Well as it stands right now it doesnt work, wether it is km or another
> > factor, I do not know, however I read in the archives that others could
> > not get it to work either.  Basically it loads fine, and I dont get any
> > kernel oops or anything, however when I run xawtv to capture video I get
> > a series of error messages:
> >
> > octl:
> > VIDIOCSPICT(brightness=32768;hue=32768;colour=32768;contrast=0;whiteness=32768;depth=32;palette=unknown): Invalid argument
> > ioctl:
> > VIDIOCSPICT(brightness=32768;hue=32768;colour=32768;contrast=0;whiteness=32768;depth=32;palette=RGB32): Invalid argument
> > ioctl:
> > VIDIOCSPICT(brightness=32768;hue=32768;colour=32768;contrast=0;whiteness=32768;depth=8;palette=GREY): Invalid argument
> > ioctl: VIDIOCSWIN(x=0;y=0;width=384;height=240;chromakey=0;flags=0):
> > Invalid argument
> > ioctl:
> > VIDIOCSPICT(brightness=32768;hue=32768;colour=32768;contrast=0;whiteness=32768;depth=16;palette=YUV422P): Invalid argument
> > ioctl:
> > VIDIOCSPICT(brightness=32768;hue=32768;colour=32768;contrast=0;whiteness=32768;depth=12;palette=YUV420P): Invalid argument
> > no way to get: 384x288 32 bit TrueColor (LE: bgr-)
> >
> 
> What application are you trying to use ?
> 
> You need to start AVview so that picture is displayed and then you can do 
> something like "cat /dev/video0" to test capture. If this works, try 
> AVview snapshot feature - if that works, try AVview capture feature.
> 
>                         best
> 
>                           Vladimir Dergachev
> 
> >
> >
> >
> > On Wed, 2005-08-17 at 08:53 -0400, Vladimir Dergachev wrote:
> >>
> >> On Wed, 17 Aug 2005, Terry Shipclark wrote:
> >>
> >>> Hello,
> >>>
> >>> Has anybody made any progress, or done any research as to what needs to
> >>> be done to the km module to make it work on a 64 bit system?  I am going
> >>> to attempt to port it in the next couple of weeks, but I was hoping that
> >>> someone has made some progress.
> >>
> >> Hi Terry,
> >>
> >>    What are the issues you are having with km ?
> >>
> >>                    best
> >>
> >>                      Vladimir Dergachev
> >>
> >>>
> >>> Terry
> >>>
> >>>
> >>>
> >>> -------------------------------------------------------
> >>> SF.Net email is Sponsored by the Better Software Conference & EXPO
> >>> September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices
> >>> Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA
> >>> Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf
> >>> _______________________________________________
> >>> Gatos-devel mailing list
> >>> Gat...@li...
> >>> https://lists.sourceforge.net/lists/listinfo/gatos-devel
> >>>
> >>
> >>
> >> -------------------------------------------------------
> >> SF.Net email is Sponsored by the Better Software Conference & EXPO
> >> September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices
> >> Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA
> >> Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf
> >> _______________________________________________
> >> Gatos-devel mailing list
> >> Gat...@li...
> >> https://lists.sourceforge.net/lists/listinfo/gatos-devel
> >
> 
> 
> -------------------------------------------------------
> SF.Net email is Sponsored by the Better Software Conference & EXPO
> September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices
> Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA
> Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf
> _______________________________________________
> Gatos-devel mailing list
> Gat...@li...
> https://lists.sourceforge.net/lists/listinfo/gatos-devel

hi,=20
   i'm running xorg 6.8.2 on slamd64 but the server is not recognizing =
my
aiw 9800 card, as far as I can remember gatos should be part of the ati=20
driver since 6.8.2, right?
so I've got a few questions:
- is my card not yet supported?
- is this list still the right placed for this question?
- could anybody, please, make a short status report for newer cards?

thanx guys
regards
Sm

On Tue, Aug 16, 2005 at 02:37:08AM +0100, Steven Newbury wrote:
>=20
> --- Pasi K=E4rkk=E4inen <pa...@ik...> wrote:
>=20
> > On Thu, Aug 11, 2005 at 01:11:29AM +0100, Steven Newbury wrote:
> > > I'm attempting to add YPrPb support to the Xorg Radeon driver.  Ini=
tially
> > my
> > > approach was to set likely looking registers to various values and =
hope to
> > be
> > > lucky, once this failed I decided I would use a different approach:
> > >=20
> > > After a ridiculous amount of work (ATI sells a dongle that somehow =
signals
> > to
> > > the driver to enable YPrPb mode, I don't have one, I'm using a stan=
dard
> > > VGA->component cable) I have managed to get it working under Window=
s XP and
> > > hoped I'd be able to make a register dump to find which registers a=
re set
> > to
> > > what.  Unfortunately I haven't been able to find anything to dump t=
he
> > registers
> > > under Windows.
> > >=20
> > > It doesn't help that I do not know whether it is the TV Out hardare
> > (Theatre
> > > chip) or the normal CRT path that provides the direct component out=
put so I
> > > don't even know which registers are likely to be relevent.
> > >=20
> > > I have discovered that not all Radeons support YPrPb, for example m=
y 9200SE
> > > (rv280) does not, as it happens much of my earlier testing was with=
 this
> > card!
> > > :-( My 8500 (r200) does, and it works very well with my Toshiba 28Z=
D26P TV
> > in
> > > 720x480p (the TV should support PAL based 576p too but the Windows =
Radeon
> > > drivers do not). =20
> > >=20
> > > Does anybody here, Federico Ulivi perhaps, have any idea where to g=
o from
> > here,
> > > what registers might be relevent, and whether there is a tool to du=
mp the
> > > Radeon registers under Windows.  I have tried using the Linux radeo=
ndump
> > > utility under Cygwin but though I managed to get it to compile I ha=
ven't
> > > managed to get it to work, lack of /proc/bus/pci doesn't help there=
.  I've
> > also
> > > been in touch with the author of ATI Tray Tools (a Windows Radeon t=
weaking
> > > tool) which does show the state of a small number of registers, how=
ever he
> > > doesn't believe he can be of much help since he only interfaces wit=
h the
> > > Windows Catalyst drivers.
> > >=20
> >=20
> > Hi!
> >=20
> > Check this out: http://zealsoftstudio.com/memaccess/
> >=20
> > -- Pasi K=E4rkk=E4inen
> Hello again Pasi,
> I've re-written radeon_dump to utilise the memaccess library, or at lea=
st
> attempted to.  I'm using Cygwin and gcc, I've got it linking to the Mem=
Acc.lib
> library from the memaccess distribution but at runtime it segfaults whe=
n it
> tries to open the driver.  I'm pretty certain it must be something I'm =
doing
> wrong with the way I'm linking it.  I've put MemAcc.lib into a ./lib su=
bdir and
> I'm using gcc -L ./lib -lMemAcc to link it.  There must be something el=
se I
> need to do???
>=20
> I can't find any references on-line about using Cygwin with memaccess, =
I'm
> probably the first I guess. :-/
>

Hi!

Sorry, but I haven't used memaccess library myself.. I think I got the ur=
l
from dri-devel list, where somebody was using it for almost the same purp=
ose
:)
=20
If you have msvc you could try with that.

- Pasi

> $ gdb ./radeon_dump.exe
> GNU gdb 6.3.50_2004-12-28-cvs (cygwin-special)
> Copyright 2004 Free Software Foundation, Inc.
> GDB is free software, covered by the GNU General Public License, and yo=
u are
> welcome to change it and/or distribute copies of it under certain condi=
tions.
> Type "show copying" to see the conditions.
> There is absolutely no warranty for GDB.  Type "show warranty" for deta=
ils.
> This GDB was configured as "i686-pc-cygwin"...
> (gdb) run
> Starting program: /home/ZeQ/radeon_dump/radeon_dump.exe
>=20
> Program received signal SIGSEGV, Segmentation fault.
> 0x80000001 in ?? ()
> (gdb) bt
> #0  0x80000001 in ?? ()
> #1  0x0040110b in main (argc=3D1, argv=3D0x4c1d68) at radeon_dump.c:198
> (gdb)
>=20
>     printf("Attempting to open MemAccess Library\n");
>     if(!maOpenLibrary())     <--- radeon_dump.c:198
>             {
>             maGetLastState(sError);
>             fprintf(stderr,"Error: %s\n", sError);
>             return -1;
>             }
>=20
>=20
> Steve
>=20
>=20
> 	=09
> ___________________________________________________________=20
> How much free photo storage do you get? Store your holiday=20
> snaps for FREE with Yahoo! Photos http://uk.photos.yahoo.com
>=20
>=20
> -------------------------------------------------------
> SF.Net email is Sponsored by the Better Software Conference & EXPO
> September 19-22, 2005 * San Francisco, CA * Development Lifecycle Pract=
ices
> Agile & Plan-Driven Development * Managing Projects & Teams * Testing &=
 QA
> Security * Process Improvement & Measurement * http://www.sqe.com/bsce5=
sf
> _______________________________________________
> Gatos-devel mailing list
> Gat...@li...
> https://lists.sourceforge.net/lists/listinfo/gatos-devel

On Thu, 18 Aug 2005, Terry Shipclark wrote:

> Well as it stands right now it doesnt work, wether it is km or another
> factor, I do not know, however I read in the archives that others could
> not get it to work either.  Basically it loads fine, and I dont get any
> kernel oops or anything, however when I run xawtv to capture video I get
> a series of error messages:
>
> octl:
> VIDIOCSPICT(brightness=32768;hue=32768;colour=32768;contrast=0;whiteness=32768;depth=32;palette=unknown): Invalid argument
> ioctl:
> VIDIOCSPICT(brightness=32768;hue=32768;colour=32768;contrast=0;whiteness=32768;depth=32;palette=RGB32): Invalid argument
> ioctl:
> VIDIOCSPICT(brightness=32768;hue=32768;colour=32768;contrast=0;whiteness=32768;depth=8;palette=GREY): Invalid argument
> ioctl: VIDIOCSWIN(x=0;y=0;width=384;height=240;chromakey=0;flags=0):
> Invalid argument
> ioctl:
> VIDIOCSPICT(brightness=32768;hue=32768;colour=32768;contrast=0;whiteness=32768;depth=16;palette=YUV422P): Invalid argument
> ioctl:
> VIDIOCSPICT(brightness=32768;hue=32768;colour=32768;contrast=0;whiteness=32768;depth=12;palette=YUV420P): Invalid argument
> no way to get: 384x288 32 bit TrueColor (LE: bgr-)
>

What application are you trying to use ?

You need to start AVview so that picture is displayed and then you can do 
something like "cat /dev/video0" to test capture. If this works, try 
AVview snapshot feature - if that works, try AVview capture feature.

                        best

                          Vladimir Dergachev

>
>
>
> On Wed, 2005-08-17 at 08:53 -0400, Vladimir Dergachev wrote:
>>
>> On Wed, 17 Aug 2005, Terry Shipclark wrote:
>>
>>> Hello,
>>>
>>> Has anybody made any progress, or done any research as to what needs to
>>> be done to the km module to make it work on a 64 bit system?  I am going
>>> to attempt to port it in the next couple of weeks, but I was hoping that
>>> someone has made some progress.
>>
>> Hi Terry,
>>
>>    What are the issues you are having with km ?
>>
>>                    best
>>
>>                      Vladimir Dergachev
>>
>>>
>>> Terry
>>>
>>>
>>>
>>> -------------------------------------------------------
>>> SF.Net email is Sponsored by the Better Software Conference & EXPO
>>> September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices
>>> Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA
>>> Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf
>>> _______________________________________________
>>> Gatos-devel mailing list
>>> Gat...@li...
>>> https://lists.sourceforge.net/lists/listinfo/gatos-devel
>>>
>>
>>
>> -------------------------------------------------------
>> SF.Net email is Sponsored by the Better Software Conference & EXPO
>> September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices
>> Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA
>> Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf
>> _______________________________________________
>> Gatos-devel mailing list
>> Gat...@li...
>> https://lists.sourceforge.net/lists/listinfo/gatos-devel
>

Well as it stands right now it doesnt work, wether it is km or another
factor, I do not know, however I read in the archives that others could
not get it to work either.  Basically it loads fine, and I dont get any
kernel oops or anything, however when I run xawtv to capture video I get
a series of error messages:

octl:
VIDIOCSPICT(brightness=32768;hue=32768;colour=32768;contrast=0;whiteness=32768;depth=32;palette=unknown): Invalid argument
ioctl:
VIDIOCSPICT(brightness=32768;hue=32768;colour=32768;contrast=0;whiteness=32768;depth=32;palette=RGB32): Invalid argument
ioctl:
VIDIOCSPICT(brightness=32768;hue=32768;colour=32768;contrast=0;whiteness=32768;depth=8;palette=GREY): Invalid argument
ioctl: VIDIOCSWIN(x=0;y=0;width=384;height=240;chromakey=0;flags=0):
Invalid argument
ioctl:
VIDIOCSPICT(brightness=32768;hue=32768;colour=32768;contrast=0;whiteness=32768;depth=16;palette=YUV422P): Invalid argument
ioctl:
VIDIOCSPICT(brightness=32768;hue=32768;colour=32768;contrast=0;whiteness=32768;depth=12;palette=YUV420P): Invalid argument
no way to get: 384x288 32 bit TrueColor (LE: bgr-)




On Wed, 2005-08-17 at 08:53 -0400, Vladimir Dergachev wrote:
> 
> On Wed, 17 Aug 2005, Terry Shipclark wrote:
> 
> > Hello,
> >
> > Has anybody made any progress, or done any research as to what needs to
> > be done to the km module to make it work on a 64 bit system?  I am going
> > to attempt to port it in the next couple of weeks, but I was hoping that
> > someone has made some progress.
> 
> Hi Terry,
> 
>    What are the issues you are having with km ?
> 
>                    best
> 
>                      Vladimir Dergachev
> 
> >
> > Terry
> >
> >
> >
> > -------------------------------------------------------
> > SF.Net email is Sponsored by the Better Software Conference & EXPO
> > September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices
> > Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA
> > Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf
> > _______________________________________________
> > Gatos-devel mailing list
> > Gat...@li...
> > https://lists.sourceforge.net/lists/listinfo/gatos-devel
> >
> 
> 
> -------------------------------------------------------
> SF.Net email is Sponsored by the Better Software Conference & EXPO
> September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices
> Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA
> Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf
> _______________________________________________
> Gatos-devel mailing list
> Gat...@li...
> https://lists.sourceforge.net/lists/listinfo/gatos-devel

On Wed, 17 Aug 2005, Terry Shipclark wrote:

> Hello,
>
> Has anybody made any progress, or done any research as to what needs to
> be done to the km module to make it work on a 64 bit system?  I am going
> to attempt to port it in the next couple of weeks, but I was hoping that
> someone has made some progress.

Hi Terry,

   What are the issues you are having with km ?

                   best

                     Vladimir Dergachev

>
> Terry
>
>
>
> -------------------------------------------------------
> SF.Net email is Sponsored by the Better Software Conference & EXPO
> September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices
> Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA
> Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf
> _______________________________________________
> Gatos-devel mailing list
> Gat...@li...
> https://lists.sourceforge.net/lists/listinfo/gatos-devel
>