oreka-user Mailing List for oreka

You need to compile the latest sources from svn and use the following.

Henri

================================================
Setting up audio file ownership and permissions under Linux:

You need to add the following parameters to config.xml:

        <AudioFilePermissions>0600</AudioFilePermissions>
        <AudioFileOwner>apache</AudioFileOwner>
        <AudioFileGroup>apache</AudioFileGroup>
        
And restart orkaudio


-----Original Message-----
From: Tony [mailto:to...@fr...] 
Sent: 11 December 2009 05:10
To: ore...@li...
Subject: [Oreka-user] orkaudio folder permissions

I have orkaudio 0.5-313 installed on a linux centos 4.8 machine. The
program is working great but the problem is the folders generated by
orhaudio to save the recordings only have root permissions for access.
Is it possible to to configure orkaudio so that the recording folders it
generates are accessible by anyone/everyone?


----------------------------------------------------------------------------
--
Return on Information:
Google Enterprise Search pays you back
Get the facts.
http://p.sf.net/sfu/google-dev2dev
_______________________________________________
Oreka-user mailing list
Ore...@li...
https://lists.sourceforge.net/lists/listinfo/oreka-user

ps -ef | grep ork
Will give you the process ID
Then
Kill PID

Henri

-----Original Message-----
From: Tony [mailto:to...@fr...] 
Sent: 11 December 2009 16:15
To: ore...@li...
Subject: [Oreka-user] command to stop and restart orkaudio

orkaudio 0.5-313 installed on a linux centos 4.8 machine

does anyone know the command to stop the orkaudio program and then 
restart it?
I've tried several variations but nothing seems to work. Thanks for any 
help. 


----------------------------------------------------------------------------
--
Return on Information:
Google Enterprise Search pays you back
Get the facts.
http://p.sf.net/sfu/google-dev2dev
_______________________________________________
Oreka-user mailing list
Ore...@li...
https://lists.sourceforge.net/lists/listinfo/oreka-user

I have orkaudio 0.5-313 installed on a linux centos 4.8 machine.
problem is the program is not generating an orkaudio.log. In config.xml 
I have <EnableReporting>true</EnableReporting> which I understand is 
correct to make a log.

if I do #./orkaudio debug I get:
Unable to open file: /var/log/orkaudio/orkaudio.log
Unable to open file: /var/log/orkaudio/messages.log
Unable to open file: /var/log/orkaudio/tapelist.log
2009-12-12 18:19:05,690  INFO root:117 -
OrkAudio service starting
2009-12-12 18:19:05,696  INFO root:93 - Loaded plugin: 
/usr/lib/orkaudio/plugins/librtpmixer.so
2009-12-12 18:19:05,699  INFO immediateProcessing:53 - thread starting - 
queue size:10000
2009-12-12 18:19:05,699  INFO batchProcessing:129 - thread Th0 
starting - queue size:20000
2009-12-12 18:19:05,699 ERROR root:46 - Failed to start command line 
server on port:10000
2009-12-12 18:19:05,700 ERROR root:138 - Failed to start http server on 
port:20000
2009-12-12 18:19:05,701  INFO root:87 - Loaded plugin: 
/usr/lib/libvoip.so
2009-12-12 18:19:05,703  INFO packet:835 - Initializing VoIP plugin
2009-12-12 18:19:05,703  INFO packet:753 - Available pcap devices:
2009-12-12 18:19:05,704  INFO packet:760 - * eth0 -
2009-12-12 18:19:05,704  INFO packet:760 - * eth0:1 -
2009-12-12 18:19:05,704  INFO packet:760 - * eth1 -
2009-12-12 18:19:05,704  INFO packet:760 - * any - Pseudo-device that 
captures on all interfaces
2009-12-12 18:19:05,704  INFO packet:760 - * lo -
2009-12-12 18:19:05,709  INFO packet:806 - Successfully opened default 
device:eth1 pcap handle:8f2b1
18
2009-12-12 18:19:05,709  INFO packet:617 - Start Capturing: pcap 
handle:8f2b118

thanks for any help.

orkaudio 0.5-313 installed on a linux centos 4.8 machine

does anyone know the command to stop the orkaudio program and then 
restart it?
I've tried several variations but nothing seems to work. Thanks for any 
help. 

Hi everybody 

please
Can you help me to setup the oreka on CentOs 4.8 
any guide or tutorial

thank you 

best regards

Hossam kandil

Hi,

Try somehtinfg like this in your config.xml:

	<AudioOutputPath>/var/recordings</AudioOutputPath>
	<AudioFileOwner>asterisk</AudioFileOwner>
	<AudioFileGroup>asterisk</AudioFileGroup>
	<AudioFilePermissions>0655</AudioFilePermissions>

-Barry Flanagan




On Fri, Dec 11, 2009 at 10:09 AM, Tony <to...@fr...> wrote:
> I have orkaudio 0.5-313 installed on a linux centos 4.8 machine. The
> program is working great but the problem is the folders generated by
> orhaudio to save the recordings only have root permissions for access.
> Is it possible to to configure orkaudio so that the recording folders it
> generates are accessible by anyone/everyone?
>
>
> ------------------------------------------------------------------------------
> Return on Information:
> Google Enterprise Search pays you back
> Get the facts.
> http://p.sf.net/sfu/google-dev2dev
> _______________________________________________
> Oreka-user mailing list
> Ore...@li...
> https://lists.sourceforge.net/lists/listinfo/oreka-user
>

I have orkaudio 0.5-313 installed on a linux centos 4.8 machine. The
program is working great but the problem is the folders generated by
orhaudio to save the recordings only have root permissions for access.
Is it possible to to configure orkaudio so that the recording folders it
generates are accessible by anyone/everyone?

------------------------------------------------------------------------------
Join us December 9, 2009 for the Red Hat Virtual Experience,
a free event focused on virtualization and cloud computing. 
Attend in-depth sessions from your desk. Your couch. Anywhere.
http://p.sf.net/sfu/redhat-sfdev2dev

------------------------------------------------------------------------------
Join us December 9, 2009 for the Red Hat Virtual Experience,
a free event focused on virtualization and cloud computing. 
Attend in-depth sessions from your desk. Your couch. Anywhere.
http://p.sf.net/sfu/redhat-sfdev2dev

After much information and software finding, I was able to compile the latest build (661) of Orkaudio.  As per the instructions I compiled orkbase, orkaudio, rtpmixer, and VOIP.  It resulted in the following files:

File Name          Size
OrkBaseD.dll      2,257KB
OrkAudio.exe     109KB
RtpMixer.dll       85KB
VoIp.dll            573KB

I stopped the orkaudio service and I assumed that I am to copy these files over to my existing installation of orkaudio and overwrite the existing files.  After I did this I tried to restart the orkaudio service and almost right away I get the following message:

Error 1053:  The service did not respond to the start or control request in a timely fashion.


I have never compiled code before so I assume I may have missed a step, file, etc.  I compiled with MSVC6.0.  I'm running this all on Windows XP Professional.

Thanks for your help.

Ben Krause - MCP<http://www.microsoft.com/learning/en/us/exam.aspx?ID=70-271&locale=en-us#tab2>, MCTS<http://www.microsoft.com/learning/en/us/exam.aspx?ID=70-680&locale=en-us#tab2>, CompTIA<http://www.comptia.org/certifications/listed/a.aspx> A+<http://www.comptia.org/certifications/listed/a.aspx>
Compro Computers, LLC
General Manager-Senior Technician
tel. 252-338-5379 fax. 252-335-0081
be...@ec...<mailto:be...@ec...>



________________________________
From: Henri Herscher [he...@or...]
Sent: Thursday, December 03, 2009 3:52 PM
To: Ben Krause; ore...@li...
Subject: RE: [Oreka-user] One side of conversation is quiet - Any way tonormalize?

Ben,

If you compile the latest source code from subversion, you can try using the following parameters in the orkaudio config.xml under the top node:

    <AudioGainDb>10</AudioGainDb>
    <AudioGainChannel1Db>20</AudioGainChannel1Db>
    <AudioGainChannel2Db>0</AudioGainChannel2Db>

These parameters take values in dB, and can be positive or negative.
AudioGain is a global parameter and applies on top of AudioGainChannel1 and
AudioGainChannel2.  AudioGainChannel1 and AudioGainChannel2 apply to the 2
channels involved in the call. In the above exampe, channel 1 would be amplified by 30dB while channel 2 would be amplified by 10 only.

Don't forget to restart orkaudio if you make such a change.

Henri

________________________________
From: Ben Krause [mailto:be...@ec...]
Sent: 02 December 2009 06:50
To: ore...@li...
Subject: [Oreka-user] One side of conversation is quiet - Any way tonormalize?

I have setup Orkaudio with a talkswitch that has two analog lines and 1 VOIP line.  All phones connect through the network to the talkswitch so we have setup a spanning port to capture the data going to and from the talkswitch.

On most conversations the remote party can only be heard faintly.  We have to turn up the speaker volumes all the way to hear the converstation decently.  The local party's voice can be hear quite well.  I'm guessing it's the analog line giving me the problems.

Is there anyway to have orkaudio normalize the audio or boost the volume on the audio?  If not I would like to request this as a feature if it's possible.

Thanks :)

Ben Krause - MCP<http://www.microsoft.com/learning/en/us/exam.aspx?ID=70-271&locale=en-us#tab2>, MCTS<http://www.microsoft.com/learning/en/us/exam.aspx?ID=70-680&locale=en-us#tab2>, CompTIA<http://www.comptia.org/certifications/listed/a.aspx> A+<http://www.comptia.org/certifications/listed/a.aspx>
Compro Computers, LLC
General Manager-Senior Technician
tel. 252-338-5379 fax. 252-335-0081
be...@ec...<mailto:be...@ec...>

All required libs (precompiled) are part of the dependencies package you can download from sourceforge.

Henri

 

  _____  

From: Sam [mailto:sam...@ya...] 
Sent: 02 December 2009 03:43
To: ore...@li...
Subject: [Oreka-user] Request for latest Oreka's win32 executable file

 

Greetings all,


Any one who has the Oreka Win32's .exe file 

that can recognize the new feature on <Cucm7-1Mode> 


I have downloaded the latest open source from sourceforge, 

however, I can't build the exe successfully... as i got many missing LIB files

Even i have downloaded the 7 external packages 

 

Any body could help ??

 

Thank you

Sam

 

 

  _____  

Yahoo!香港提供網上安全攻略，教你如何防範黑客! <http://hk.promo.yahoo.com/security/> 了解更多

Ben,

 

If you compile the latest source code from subversion, you can try using the
following parameters in the orkaudio config.xml under the top node:

 

    <AudioGainDb>10</AudioGainDb>

    <AudioGainChannel1Db>20</AudioGainChannel1Db>

    <AudioGainChannel2Db>0</AudioGainChannel2Db>

 

These parameters take values in dB, and can be positive or negative.

AudioGain is a global parameter and applies on top of AudioGainChannel1 and

AudioGainChannel2.  AudioGainChannel1 and AudioGainChannel2 apply to the 2

channels involved in the call. In the above exampe, channel 1 would be
amplified by 30dB while channel 2 would be amplified by 10 only.

 

Don't forget to restart orkaudio if you make such a change.

 

Henri

 

  _____  

From: Ben Krause [mailto:be...@ec...] 
Sent: 02 December 2009 06:50
To: ore...@li...
Subject: [Oreka-user] One side of conversation is quiet - Any way
tonormalize?

 

I have setup Orkaudio with a talkswitch that has two analog lines and 1 VOIP
line.  All phones connect through the network to the talkswitch so we have
setup a spanning port to capture the data going to and from the talkswitch.


 

On most conversations the remote party can only be heard faintly.  We have
to turn up the speaker volumes all the way to hear the converstation
decently.  The local party's voice can be hear quite well.  I'm guessing
it's the analog line giving me the problems.

 

Is there anyway to have orkaudio normalize the audio or boost the volume on
the audio?  If not I would like to request this as a feature if it's
possible.

 

Thanks :)

 

Ben Krause - MCP
<http://www.microsoft.com/learning/en/us/exam.aspx?ID=70-271&locale=en-us#ta
b2> , MCTS
<http://www.microsoft.com/learning/en/us/exam.aspx?ID=70-680&locale=en-us#ta
b2> , CompTIA <http://www.comptia.org/certifications/listed/a.aspx>  A+
<http://www.comptia.org/certifications/listed/a.aspx> 
Compro Computers, LLC
General Manager-Senior Technician
tel. 252-338-5379 fax. 252-335-0081
be...@ec... 

 

I have setup Orkaudio with a talkswitch that has two analog lines and 1 VOIP line.  All phones connect through the network to the talkswitch so we have setup a spanning port to capture the data going to and from the talkswitch.

On most conversations the remote party can only be heard faintly.  We have to turn up the speaker volumes all the way to hear the converstation decently.  The local party's voice can be hear quite well.  I'm guessing it's the analog line giving me the problems.

Is there anyway to have orkaudio normalize the audio or boost the volume on the audio?  If not I would like to request this as a feature if it's possible.

Thanks :)

Ben Krause - MCP<http://www.microsoft.com/learning/en/us/exam.aspx?ID=70-271&locale=en-us#tab2>, MCTS<http://www.microsoft.com/learning/en/us/exam.aspx?ID=70-680&locale=en-us#tab2>, CompTIA<http://www.comptia.org/certifications/listed/a.aspx> A+<http://www.comptia.org/certifications/listed/a.aspx>
Compro Computers, LLC
General Manager-Senior Technician
tel. 252-338-5379 fax. 252-335-0081
be...@ec...<mailto:be...@ec...>

Greetings all,

Any one who has the Oreka Win32's .exe file 
that can recognize the new feature on <Cucm7-1Mode> 

I have downloaded the latest open source from sourceforge, 
however, I can't build the exe successfully... as i got many missing LIB files
Even i have downloaded the 7 external packages 

Any body could help ??

Thank you
Sam



      Yahoo!香港提供網上安全攻略，教你如何防範黑客! 請前往 http://hk.promo.yahoo.com/security/ 了解更多!

Greetings all-

I'd like to install Oreka on a Centos 5.x server but I find I'm having problems with the version of libpcap installed. The latest is 0.9.4 but the orkaudio RPM (built for Centos 4.2) requires libpcap 0.8.3. I've tried making symlinks to overcome the issue but with no success. Without having to build Oreka from source, is there a away around this libpcap issue? Maybe there are RPMs built for Centos 5 floating around?

Thank you!

--Tim