Open Source Command Line Tools - Page 7
Sort By:
Command Line Tools
View 5753 business solutions-
MongoDB Atlas runs apps anywhereMongoDB Atlas gives you the freedom to build and run modern applications anywhere—across AWS, Azure, and Google Cloud. With global availability in over 115 regions, Atlas lets you deploy close to your users, meet compliance needs, and scale with confidence across any geography.
-
MongoDB Atlas runs apps anywhereMongoDB Atlas gives you the freedom to build and run modern applications anywhere—across AWS, Azure, and Google Cloud. With global availability in over 115 regions, Atlas lets you deploy close to your users, meet compliance needs, and scale with confidence across any geography.
-
1
Ink is a command line tool which displays the ink level of your printer. It makes use of libinklevel.
">
-
2
ProxyCrypt
Encrypted volumes through command line
ProxyCrypt is a command line tool that creates encrypted volumes within a file or a hard drive. Encryption and decryption are made on the fly, allowing you to use encrypted volumes like normal ones. Designed for paranoids and advanced users, it is also fast, very lightweight, open source and easy to recompile. See the features below. It works as a "proxy" for the AIM driver or the ImDisk driver. AIM driver is included in the full package. See the documentation for more informations and an example of use: https://sourceforge.net/p/proxycrypt/doc/ Requirements: - Windows 7 or later - Arsenal Image Mounter or ImDisk Virtual Disk Driver - Administrative privileges - 64-bit CPU with SSE3 instructions - About 1 GB of RAM temporarily required for password checking with default settings Hashes of all versions: https://sourceforge.net/p/proxycrypt/doc/Hash -
3
srt2vobsub
A command-line tool that converts text subtitles to vobsub
A command line tool for Linux and other Unix-like systems that generates a pair of .idx/.sub vobsub subtitles files from textual subtitles. -
4
TraceMAC - Traceroute for MAC addresses
TraceMAC is a command-line Layer 2 traceroute for Cisco switches
TraceMAC is a Windows/Linux command-line tool that allows you to trace a specific MAC address thru Cisco switches. It works by connecting to a switch using SSH, SNMP, Telnet, HTTP or HTTPS and do some "show commands" and later process the output, this will happen recursively until it finds the switch where that MAC address (PC/Printer/Etc) is directly connected. Note: It works with Cisco switches only and you must have CDP enabled at least on trunks/links between switches! Is tested with Cisco switches: Catalyst: 2960,3560,3750,4948,6509,9200,9300,9500 (All protocols) Nexus: C9332C, 93180YC-EX (NX-OS SSH) Express 500 (HTTP) FYI: It uses Nbtscan.exe (NetBIOS) as a alternative method to discover the mac address of a host and now seems that it is considered a malware. Anyway it is just a simple network tool that can scan the network similar to NMAP or Angry IP Scanner, etc... -
Simple, Secure Domain RegistrationRegister or renew your domain and pay only what we pay. No markups, hidden fees, or surprise add-ons. Choose from over 400 TLDs (.com, .ai, .dev). Every domain is integrated with Cloudflare's industry-leading DNS, CDN, and free SSL to make your site faster and more secure. Simple, secure, at-cost domain registration.
-
5
Command Line
Your Personal Hacking Terminal.
Command Line is an Open-Source Software for Pentesters and Ethical Hackers it contains many Functionalities which helps Ethical Hackers. It is CLI Based Application use for checking Networks and IP's it also supports functionalities like downloading Packages from Internet Including YouTube.It is also used for Port scanning, IP-Finding it is also useful for checking ping and net speed with the functionality of scanning the net speed by selecting the best server. It also has Host IP finding capability by Host it can also have commands used in Normal Terminals. TAGS: IP Resolver, IP sniffer, IP grabber, IP puffer, lanc v2, playstation, network sniffer, ip psn resolver, ddos tool for ps4, ps4 ip grabber, lanc, ip xbox resolver, stresser, xboxone ip sniffer, ip finder, leak ip, lanc tool, lanc remastered, lanc download, ocnosniff, ps4 ip, xbox ip, ps4 ddos, xbox ddos, ps4 ip, boot people, xbox ip, pull ips lanc-remastered-ip-sniffer -
6
PDFtk Bookmarks Editor
GUI for updating PDF bookmarks using PDF Toolkit (PDFtk) on Windows
Free and open source GUI application for updating bookmarks in a PDF document using the PDF Toolkit command line tool, PDFtk Server. User selects the PDF via drag and drop and then edits the bookmark entries in a text file using a simple, 1-line data format. Program handles everything else in response to a few user button clicks. OS: Windows. Author: David King. License: GPLv3. -
7
Live CD With Zerofree Utility i686 32Bit
A Custom Puppy Linux Live CD With Zerofree Utility i686 32 Bit
After Booting with this Live CD, just click on the CDROM icon on the Desktop, to open its folder contents, then Right Click the zerofree.sh file and Choose the "Run in Terminal" option and then follow the instructions shown on the terminal. As you may be aware, Booting with a Live CD, requires that you need to change the Boot Order on your System / Guest BIOS, quickly on startup, by pressing either F2 OR F12 OR F10 OR an equivalent key and then change the Boot Order to boot from the CDROM first. Some Hints: Puppy Linux Live CDs show some dialogs / settings window on first startup / first shutdown. Feel free to dismiss / close them, if you do not want to make any changes, to the live cd's operation, next time, on the same system. This will not affect the zerofree's work in any way. Apart from this, using the Internet Browser, built in, would require a Free Memory of 1 GB or more, for better Performance ( as it is generally a memory intensive activity ) -
8
cline
Command line tool for counting source code lines
cline is a command line tool that counts code lines or non-whitespace characters in your project folder. It is designed to recursively find any source file matching specific rules and count the line breaks within that file. You may specify file suffixes to include or exclude as well as regular expressions for code lines that shall be excluded (e.g. to exclude comments). By default a heuristic algorithm skips binary files. You may configure the restrictiveness of this algorithm with command line options. -
9
dBASE Reader and Converter
!!! NO LONGER MAINTAINED !!!
dbf is an easy-to-use command line tool to show and convert the content of dBASE III, IV, and 5.0 files. It reads dBASE databases and prints the content to the screen or converts it to comma-separated (*.csv) files which can be opened in Excel, Calc. -
Dominate AI Search ResultsAthenaHQ is a cutting-edge platform for Generative Engine Optimization (GEO), designed to help brands optimize their visibility and performance across AI-driven search platforms like ChatGPT, Google AI, and more.
-
10
EnDiskEx
Bulk extractor for Ensoniq-formatted disk images
EnDiskEx is a command-line tool that bulk extracts instruments, sequences, songs, and banks from Ensoniq-formatted disk images (RAW, GKH, EDE, and EDA) for the EPS/ASR family of samplers. The extracted files are saved as EFE / SMF / TXT files. EnDiskEx is designed to extract Ensoniq banks for re-creation within a different DAW. It will track down the instrument and song files from bank references even if they were saved on another disk. There also exists a disk mapping feature to correct for any errors in this process caused by having relabeled disks, forgotten to label disks, etc. EnDiskEx has been tested and validated against a variety of RAW, GKH, EDE, and EDA images files the dev team has, including but not limited to, the ASR factory disks, the EPS 16+ factory disks, and the EPS (classic) factory disks. -
11
ImpLib SDK
ImpLib SDK produces custom Import libraries for Windows DLL
ImpLib SDK combines free programming tools for authoring custom import libraries for Windows DLL (32 and 64 bit). The SDK supports advanced features, like cdecl2stdcall conversion, importing by ordinal, removing original thunk, storing symbols from different DLL files in a single import library. The ImpLib SDK is also useful to overcome any legal restrictions when redistributing the import libraries for certain DLL files, like the Microsoft® C++ runtime. The import libraries for the CRT or STL are part of the Windows SDK. Even though the SDK is available for free, redistributing these files is not allowed according to the current license agreements. An alternative is to generate these import libraries using the ImpLib SDK, as it doesn't restrict redistribution. The ImpLib SDK is free even for commercial use and redistribution of any kind, as long as all copyrights are preserved. Guide: https://implib.sourceforge.io/EN.HTM GitHub repo: https://github.com/vkamenar/implib-sdk -
12
a8cas
A portable library and tools for archiving images of Atari 8-bit tapes
A portable library and tools for archiving images of tapes with Atari 8-bit computer software. Provides a common interface for loading and saving tape images in various formats. Designed for use by emulators and Atari<->PC communication software. -
13
Simple Java Image Tool
Easy-to-use command line tool for images
SJIT is an easy-to-use command line program to analyze, manipulate and convert image files. -
14
OPSI UPDATER
Check and Update Products on OPSI Server
This OPSI SERVER Command line Tool (Opsi Updater) will check for available OPSI Product Updates on official Servers (example Mozilla) and will allow to Download and Update older Product Versions on OPSI Repository and distribute them on clients having older versions. readme: http://svn.code.sourceforge.net/p/opsiupdater/code-0/trunk/readme.txt -
15
quvi is a command line tool for parsing Adobe Flash media stream URLs. libquvi is a cross-platform library for parsing media stream URLs with C API.
">
-
16
Proxifier is a command line tool which allows users to tunnel Internet applications through HTTPS, SOCKS v4, and SOCKS v5 Proxy Servers. Proxifier can be used to: access the Internet from a home or corporate network through a proxy server running on th
-
17
ScriptManager is a command-line tool for executing and managing plain SQL scripts. ScriptManager was written in pure Java and requires JDBC driver to connect to any JDBC-compliant database.
-
18
SiteOne Crawler (desktop app)
A free, feature-rich web analyzer and exporter/cloner you will love!
A free in-depth website analyzer providing audits of security, performance, SEO, accessibility and other technical aspects. Available as a desktop application for Windows/macOS/Linux and as a CLI tool for advanced users and CI/CD processes. It also includes an offline web page exporter (website clone, mirror). -
19
pandoc
Universal text format converter
Pandoc is a Haskell library for converting from one markup format to another, and a command-line tool that uses this library. For latest releases, see https://github.com/jgm/pandoc/releases. -
20
sfsu
A modern, and very very fast, implementation of Scoop
">
-
21
Tagger#
Command-line media (audio/video/photo) tagger based on TagLib#
Command-line tool for reading and writing metadata in media files, including video, audio, and photo formats. Based on TagLib#: https://github.com/mono/taglib-sharp. Requires .NET 3.5 SP1. -
22
cd2iso is a small command line tool for creating an ISO-9660 image file of a CD-ROM or DVD-ROM. Perfect for taking backup of your CD and DVD collection.
-
23
Image to Ascii Art
Convert images to Ascii Art, with a lot of options and drawing tools
This started as a simple image to ascii converter. However it has evolved into a much more complete ascii art suite. It has many features, including image adjustments, brighness, contrast, proportions) several image libraries, drawing and editing tools, a command line tool and more. The interface has been designed with special care, to include all tools in an easy and understandable way. -
24
TextFileReverse
A Windows command line tool to reverse the contents of a text file.
A simple command line tool, drop the Reverse.exe into the %systemroot% directory in Windows to call the program from the command line. Then just call like: Reverse /i Path\File.txt and the file will be overwritten with reversed text. Or an outfile can be specified Reverse /i Path\File.txt /o path\OutFile.txt this will leave the original file intact. A file containing: item 1 item 2 item 3 Would then be reversed to item 3 item 2 item 1 You can also remove blank lines with the switch /r, as of 1.0.1.0 -
25
TortoiseHg is a shell extension that let users of Mercurial SCM (Hg) work directly from MS-Windows Explorer. It also includes a command line tool, hgtk, for use on Linux and other platforms.